amine catalyst for polyurethane foams

Brand Name:VICUS-VIDA

Model Number:DMDEE

Place of Origin:CHINA

... agent that serves to accelerate the reaction during the synthesis of polyurethane and its raw materials. The following is a comprehensive introduction regarding the PU catalyst NO. Application Prodution Grade No. Chemical Name Features 1 Flexible Foam &

Brand Name:EXCEEDCHEM

Model Number:EX-102

Place of Origin:China

Amine Catalyst for Lowdensity Microcellular Polyurethane Foams CAS 280-57-9 EX-102 1. General Description AMINE CATALYST EX-102 is an amine catalyst diluted in mono-ethylene glycol and is used in lowdensity microcellular polyurethane foams to significantly improve the foam flowability. 2. Main Features and Advantages Improved flowability in low density microcellular polyurethane foams Good foam...

Brand Name:JOYWAY

Model Number:AMIN A-33 (TEDA -A33)

Place of Origin:China

AMIN A-33 (TEDA -A33) Polyurethane Additives AMIN A-33 (TEDA -A33) for the foam production Application It has good catalytic effect on the reaction of isocyanate with water and the reaction of isocyanate with polyols. It is mainly used in flexible foam, rigid foam, polyurethane sole and polyurethane molding foaming...

Brand Name:LIHONG

Model Number:LH-5220 Catalysts

Place of Origin:China

... and other industries. This polyurethane additive can effectively reduce the hardness, and improve the softness and tear strength of the sponge. 1. Improve the softness of the sponge products. 2. Increase the special ...

Brand Name:ZHMACH

Model Number:ZHF-2017

Place of Origin:Guangdong, China (Mainland)

...mixing speed. Increase the width of the conveyor to make a wider block more than 2070, maximum up to 2500mm. Extra polyol, TDI, catalyst metering unit. Calcium carbonate or melamine feeder system. Pigment system, traditional or milliken reactant system.

Brand Name:HaiKe

Model Number:Polyurethane Sandwich Panel

Place of Origin:Chongqing, China

... agent, catalyst, foaming agent in accordance with a certain ratio of mixing, the need for related equipment constant temperature and constant pressure molding next thermosetting waterproof ...