accurate rubber plastic thermal conductivity tester

Brand Name:Lixian

Model Number:HZ-7039

Place of Origin:China

Rubber Silicone Thermal Conductivity Tester Machine Measured temperature range room temperature ~100℃ Thermal conductivity tester new HZ-7039A.pdf Thermal Conductivity Tester can be roughly divided into two categories: steady-state method and dynamic method.The tester uses steady-state method to measure the thermal conductivity of different materials. Its design method is clear, simple and typical and practical.Measuring the thermal conductivity

Brand Name:HAIDA

Model Number:HD-R351

Place of Origin:Guangdong, China (Mainland)

...accurate, non-destructive testing and simple sample preparation. The instrument follows ISO22007-22008 and GB/T32064-2015 standards, with a wide ...

Brand Name:Haida

Model Number:6053-HD

Place of Origin:China

...accurate, non-destructive testing and simple sample preparation. The instrument follows ISO22007-22008 and GB/T32064-2015 standards, with a wide ...

Brand Name:BAXIT

Model Number:GLO-CT6

Place of Origin:CHINA

...: AC 220V; 50HZ Heat source: Heated copper block, heated with 36V safe voltage Test materials: silicone rubber, plastic board, perlite, aluminum metal, air, etc., plus the surrounding frame can be

Brand Name:Lonroy

Model Number:LRPL-300

Place of Origin:China

... board, extruded board, foamed concrete, hollow glass, wood, all kinds of insulation materials and other uniform plate materials, and can measure the thermal conductivity of particles, bulk materials, soft materials and other substances. The

Brand Name:LIYI

Model Number:LY-BT-300

Place of Origin:Dongguan

... include fiber board, loosing filler glass fiber, ceramic fiber, foam plastic (XPS/EPS/PUR, etc.), inter-layer composite plate, vacuum plate, rubber products, cement(concrete) products. Measuring with this machine, it tends to be stable rapidly and

Brand Name:ZL

Model Number:ZL-3044C

Place of Origin:CHINA

Portable Thermal Conductivity Tester Transient Plane Heat Source Method Thermal Conductivity Tester Transient Plane Heat Source Method Product Introduction The ZL-3044C thermal conductivity tester utilizes advanced transient plane heat source technology (...

Brand Name:Gold

Model Number:GD-ISO8302

Place of Origin:China

... conductivity of insulation materials. It has a wide testing temperature range (high temperature up to 800°C, low temperature up to - 160°C). It can not only measure soft materials (...

Brand Name:YUYANG

Model Number:YY165

Place of Origin:China

...Thermal Conductivity Tester of Heat Flow Meter 0.1 ~ 8.0 m2K/W Description: It is mainly used to test the thermal conductivity of insulation materials, glass, fiber, foam and so on. Testing materials include fiber board, loosing filler glass fiber, rock wool, foam plastic (XPS/EPS/PUR, etc.), inter-layer composite plate, vacuum plate, rubber...

Place of Origin:China

Brand Name:CHENGFENG

... grease, resins, rubber, ceramics, aluminum substrates and other materials, as well as the contact thermal resistance at solid interfaces and the thermal conductivity of materials. The detection material is a solid sheet, and with a surrounding frame,

Brand Name:Ziitek

Model Number:TCP200-15-02A

Place of Origin:China

...point thermal interface materials, thermal conductive insulators, thermally conductive tapes, electrically & thermally conductive Interface pads and thermal grease,Thermal Conductive plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials products,

Brand Name:Ziitek

Model Number:TIF035AB-05S

Place of Origin:China

... thermal interface materials, thermal conductive insulators, thermally conductive tapes, electrically & thermally conductive Interface pads and thermal grease,Thermal Conductive plastic,Silicone Rubber,Silicone Foams,Phase Changing Materials products, with

Brand Name:YUYANG

Model Number:YYF096

Place of Origin:China

... and report generation. This testing method easy, quick and good repeatability, which is suitable for the heat transferring R&D of the metal materials. It can also used for the test of plastic, rubber,

Brand Name:LIB

Model Number:TS-340

Place of Origin:China

+220℃ Degree High Temperature Thermal Shock Tester Description +220℃ Degree High Temperature Thermal Shock Tester is a necessary test equipment of material such as metal, plastic, rubber, electronics and so on, used for testing material structure or ...

Brand Name:Jinzhen Boiler

Model Number:YYW-1400

Place of Origin:China

...Thermal Conduction Oil Boiler Thermic Fluid Boiler Thermal Oil Heater For Oil Refinery Plant​ Thermic Fluid Heater, thermal oil boiler Heat Power:300,000-2,000,000 Kcal/H Working Pressure :0.8 Mpa Fuel :light oil,heavy oil,diesel Application : textile printing and dyeing, plastic and rubber, paper industry, wood industry, building material, food industry YY(Q)W series oil fired thermal...

Brand Name:ASLI

Place of Origin:Guangdong, China

Model Number:OA-408

... Aging Test Chamber Rubber Plastic Wire Ozone Resistance Tester Accelerated Aging Testing Machine This ozone climate test chamber is designed for testing rubber, plastic, and wire materials against ozone exposure. It accurately controls and adjusts ozone ...

Place of Origin:China

Brand Name:GC

Model Number:GC-LX-D

Shore D Hardness Tester Model: GC-LX-D Product Introduction Shore D type hardness tester is suitable for hardness testing of high-hardness rubber and plastic materials such as general hard rubber, hard resin, organic glass, thermoplastics, printing plates...

Brand Name:HUATEC

Model Number:HT-6620

Place of Origin:China

... Shore hardness measuring instrument, which integrates measuring device and data processing in one, using advanced technology, with the advantages of compact structure, accurate measurement, easy to carry, beautiful shape, light weight and easy to operate.

Categories:Carbon Nanotube

Country/Region:china

Product Details partial application Multi-walled carbon nanotubes, prepared by modified catalytic chemical vapor deposition (CCVD), have the characteristics of high conductivity, high specific surface area, high carbon phase purity, narrow outer diameter ...

Brand Name:junlin

Model Number:XK-560

Place of Origin:Qingdao, Shandong, China

Product Description: 22-Inch Rubber Manufacturing Open Mixing Mill XK-550/560 Cost-Effective Customization On Demand Application Scenario: The open mixing mill is mechanical equipment used for rubber thermal mixing, blending, mastication, and sheeting. ...