600mm down the hole hammer

Brand Name:GLORYTEK

Model Number:GL355SK

Place of Origin:China

...Hammer DHD350 With 2 3/8reg Thread Description DTH Hammers in different sizes hole ranging from 110mm to 600mm. DTH hammers are made corresponding to Drilling Bits to carry out prevalent objectives. These hammers are used in various down the hole operations like bench Drilling. Our DTH hammer...

Brand Name:MTH

Model Number:DHD340

Place of Origin:China

...600mm Bit Diameter DTH Hammer for Optimum Drilling Performance Product Description: Down the hole hammer piling is a type of hammer drilling that is used to penetrate hard rock, such as granite and limestone. The DTH Hammer is a powerful and reliable tool for drilling in these difficult conditions. The DTH Hammer is designed to provide a fast and efficient drilling performance, and is packaged in a sturdy wooden box. This hammer...

Brand Name:Pangolin

Place of Origin:HeBei China

...600Mm Hard Rock Drilling DTH Tools Hole Opener Factory High Quality Hard Rock Drilling DTH Tools Hole Opener Introduction The reaming diameter of DTH hole drill bits ranges from 130mm to 660mm (5 1/8" to 26"). The tool holder design is suitable for most popular DTH hammers and is manufactured in a variety of configuration styles to meet each special On-site drilling requirements. Only the best steel is used in the production of the hole

Brand Name:JYY mechanical

...600mm Hammer Grab With Jaw Introduction Crushing and grabbing soil, large pebbles, rocks, high-strength manganese steel materials Featurs The wear-resistant welding wire is welded by the edge of the flap, and the service life is long. When rushing to grasp, the grasping flap has a large opening diameter, which can grasp larger diameter stones or other obstacles in the hole...

Brand Name:SINOCOREDRILL

Model Number:CR-50

Place of Origin:CHINA

CR-50 Full Hydraulic Multifunction Top Drive Drill Rig The CR -50 universal drilling rig enables each user to drill with the following methods, with borehole diameters of 3.5 ″to 47″and drilling depths up to 1 200m. ●Rotary-drilling with direct circulation...