50w flame source ul94 test apparatus

Brand Name:YUYANG

Model Number:SIT

Place of Origin:CHINA

...Flame Source Test Apparatus Introduction The Single Flame Source Test Apparatus is built in accordance with ISO 11925-2: Reaction to fire tests for building products - Part 2: Ignitability when subjected to direct impingement of flame. The ignitability apparatus...

Brand Name:PEGO Group

Model Number:HVR-4H

Place of Origin:China

... test includes V-0, V-1, V-2, horizontal flame tester HB, and 500W vertical flame test includes 5VA, 5VB, HF-1, HF-2 and HBF. It is widely used in the R&D department, QC department and production department of lighting equipment, low-voltage apparatus,

Brand Name:Sinuo

Model Number:SN771

Place of Origin:China

... clause 4.7.3, IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, IEC60335-1 clause 30, etc. It simulates the influence of early-stage flame when there is a fire around the

Brand Name:HOOHA

Model Number:ZY6017

Place of Origin:China

... direction under the condition of 50W flame. Meet the standard: GB/T2408, GB13488, ISO1210, UL94 V- 0v-1v-2, ASTMD635, IEC707, IEC 60695-11-10 standard. Main features: Product composition: The plastic horizontal vertical combustion test machine consists of

Brand Name:YUYANG

Model Number:YY312

Place of Origin:China

UL94 Horizontal And Vertical Flame Tester Lab Testing Machine SUS 304 Summary: UL94 Horizontal-Vertical Flammability Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test...

Place of Origin:China

Brand Name:HongCe

Model Number:HVF-3A

...related requirement of UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-20. It simulates the influence of early-stage flame when there is a fire around the electric and electronic products, so that to judge the igniting danger degree. It is

Brand Name:Hust Tony Instruments

Model Number:HTB-007

Place of Origin:China

...Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame...

Brand Name:DAXIAN

Model Number:DX8369

Place of Origin:China

...Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame...

Brand Name:GOLD

Model Number:GD-ISO 11925-2

Place of Origin:China

...core principle of Kleinbrenner in Germany. It uses standard flames to conduct vertical direct combustion tests on samples to accurately evaluate the combustion characteristics of building materials. The equipment fully covers the detection requirements of

Place of Origin:China

Brand Name:KeRang

Horizontal-vertical Flame Test Apparatus Standard:UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. Application:It simulates the influence of early-stage flame when there is a fire around the electric and electronic products...

Brand Name:AI

Model Number:SIT

Place of Origin:CHINA

... to ignition by a small flame, with surface ignition and edge ignition. Feature The combustion chamber is made from corrosion resistant stainless steel, to maximize operating life. It has large ...

Brand Name:Delta

Model Number:SIT

Place of Origin:China

... 11925-2 standard. It uses the German Kleinbrenner principle to determine the combustion properties of building materials under direct impact from a small vertical flame. It is applicable to building material categories of B, C, D, E, Bfl, Cfl, Dfl and

Place of Origin:CHINA

Brand Name:YOUBI

Model Number:UP-5020

...Test Apparatus Professional Building Materials Flame Test Machine complies with EN ISO 11925-2, DIN 4102 and GB/T 8626 standards. It is used for ignitability, flame spread and fire hazard testing of various building insulation, decoration and composite materials. Adopts precise digital timing system and standard propane flame source, providing stable and repeatable fire test...

Brand Name:Gaoxin

Model Number:GX-8348

Place of Origin:China

...tems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation.Suitable for all kinds of flooring materials.

Categories:Smoke Density Chamber

Country/Region:china

...Test Apparatus Standards: ASTM D2843 Test Materials: Building Material Key Feature: 95% Propane Gas Source | High Accuracy Measurement | Building Material Focus Product Description This NBS Smoke Density Chamber is a professional fire testing instrument designed to measure the specific optical density (Ds) of smoke generated when test specimens are exposed to controlled radiant heat sources and/or flames

Brand Name:Kinte

Model Number:WH-8901JK

Place of Origin:Guangdong,China (Mainland)

...Test Equipment 0.5M3 Glow Wire Test Apparatus ​ Glow wire test is IEC6 0695-2-10: 2000 ~ IEC6 0695-2-13: 2000 Glow Wire / Hot Wire, Basic Test Method, Glow-wire Test Device and General Test Procedure and UL 746A, IEC829 DIN695, VDE0471 The use of non-flame ignition source program simulation test...

Brand Name:VOUCH

Model Number:5920

Place of Origin:CHINA

Smoke density tester of plastic material Description: GB/T 8323specimens of sheet materials,composite materials or assemblies not exceeding 25mm in thickness to be placed vertically in a closed cabinet equipped with a specified grade of thermal radiation ...

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

Glow Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It ...

Brand Name:KingPo

Place of Origin:China

Product Details Standard: Conforms to IEC60065:2014 clause 14.1, 20.2.1, 20.2.4, Annex G, UL94,IEC60695-11-2, IEC60695-11-3, IEC60695-11-4, IEC60695-11-10, IEC60695-11-20. Application: It simulates the influence of early-stage flame when there is a fire...

Brand Name:TESTEX

Model Number:TF346

Place of Origin:China

Glow Wire Tester With Touch Screen And Temp. Range From 500℃ To 1000℃ Application Glow Wire Tester, is to determine the fire hazard of electrical parts and components subjected to malfunctions such as overload, short circuit, poor connection, or oth...