50n force tester

Model Number:MY-6309

Brand Name:MINGYANG

Place of Origin:Hubei China

... Short Circuit Impedance Tester for Power Transformer Product Description Low voltage short circuit impedance test is the most direct method for transformers to identify winding deformation caused by mechanical force impacts during delivery or installation...

Brand Name:Lonroy

Model Number:P-H03

Place of Origin:China

... Coefficient Test 1. Application P-H03 Horizontal High-speed Peel Tester is suitable for high-speed peeling test of adhesive products and new materials such as release film, release paper, film, tape, etc. It can be ...

Brand Name:AI

Model Number:AIC21149

Place of Origin:China

...force tester is widely used for the stripping force, pressure resistance and bending test of wires, cables, terminals etc. Standards: • GBT 25085-2010 Technical parameters: • Max test force: 50N, 100N (optional for users) • Stroke: about 300mm • Speed: 50 ~ 250mm/min, settable • Relative error of test force...

Model Number:ZL-2010

Brand Name:ZL

Place of Origin:China

Sponge Indentation Force Deflection IFD Hardness Tester Product Overview This ISO2439 ASTM D3574 compliant foam compression strength testing machine measures the hardness of sponge and foam ...

Brand Name:SKYLINE

Place of Origin:Guangdong, China

Model Number:SL-TL08

...durability of handle assemblies, connecting parts and stitching. Product Overview The tester is essential for luggage, bag and handle manufacturers as well as testing laboratories. It reproduces the repeated pulling and jerking force a handle withstands

Place of Origin:China

Brand Name:Cartesykj

Model Number:CTFZ-3

...force tester Roller Brake tester with axle load brake testing Product Introduction: Its main for the brake performance testing. The roller brake tester can detect and calculation the each axis (left and right wheels) block force of car, brake force and the deviation of brake force (process deviation, and maximum deviation), as well as the ratio of brake force...

Place of Origin:HONG KONG

Brand Name:ALLIED TESTING

Model Number:TP11F

test probe 11 with 50N force,test probe with force Model TP11F: test probe 11 with 50N force,test probe with force rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings...

Brand Name:YOUBI

Place of Origin:CHINA

Model Number:UP-4042

... force and smoothness of metal and plastic zippers. It is widely used in quality control laboratories, zipper manufacturing plants, and textile product inspection ...

Brand Name:Forsentek

Model Number:FSSM

Place of Origin:China

... / 4.4 lbf 50N / 5kg / 11.2lb 100N / 10kgf / 22.4lbf 200N / 20kgf / 45 lbs 300N / 30kg / 67lbf 500N / ...

Place of Origin:China

Brand Name:Julixing

.... Used to check the security of parts that snap together. The spring gauge assembled in the handle can be calibrated to the neccessary force for using the instrument. This probe is make of stainless steel with appropriated hardened tip and a handle in

Brand Name:Infinity Machine

Model Number:IN-S9001G

Place of Origin:Made in China

...Force Tester Touch Screen Compression Test Machine Model:S9001G Specialties: 1. Button compression force tester have X, Y, Z axes, X,Y are to move the testing platform, so that it can realize the multi-points compression test for the buttons force test and the electronic products compression test; Z axis is connected to the transducer to apply the test force, collect the test force...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-12.5

IEC60529 IP2X Test Probe with 12.5mm sphere with a 50N force with calibration Product Description IEC60529 IP2X Test Probe with 12.5mm sphere with a 50N force with calibration BND-2A The Test Porbe meets the standard requirements of IEC60529. The Test ...

Brand Name:RKENS

Model Number:RS-PT301

Place of Origin:China

...Force Pull Tester Manual Type Usage: This crimp force pull tester is for measuring pull force after crimp connection, and weld connections. It is manual type with needel type pull tester. Simple and Cost-effective. And there are different pull force selection from 5KG 10KG 20KG 30KG 40KG 50KG. Model: RS-PT301 Manual Type Pull Tester With Needel Type Pull Tester Pull tester...

Brand Name:Sinuo

Model Number:SN2210-2T

Place of Origin:China

... 60529 IP2X. It features an M6 threaded hole at the end of the handle, allowing it to be connected to a force gauge for precise testing applications. Technical parameters: Parameters /Model SN2210-2T Name Standard test probe with force Joint 1 30±0.2 (mm)

Model Number:HT-I07A

Brand Name:HongCe

Place of Origin:China

...Hazardous Parts Testing – 50N Force Test Finger Product Overview IEC standard test finger probes are designed to test the protective performance of enclosures against hazardous components when subjected to external mechanical forces. They are widely used...

Brand Name:HAIDA

Place of Origin:Guangdong, China (Mainland)

Model Number:8040-HD

...tips and evaluate whether the sharpness meets standard requirements. Also known as the Syringe Puncture Force Tester, this instrument ensures quality control in medical device manufacturing. Technical Specifications Feature Description Display 7-inch K600+

Brand Name:PERFECT

Model Number:PT-6088B

Place of Origin:Dongguan City,Guangdong Province,China

... Usage : At the condition high speed to peeled off entire roll adhesive tape, Adhesive Unwind Peeling Strength Tester is to observed the strength change and analysis size of peel force during entire roll adhesive tape stripping process, as adhesive tape at

Model Number:JH-RYF-30KWD100-W10A

Brand Name:Jianhong

Place of Origin:China

Product Features Rated power 30KW, rated voltage DC100V, maximum current 300A, power factor 1; Chip resistor is adopted, and the resistance accuracy is 3%. The minimum power adjustment step is 100 w; Multi-gear power segmentation: 100W, 200W, 500W, 1kW, ...

Brand Name:Haida

Model Number:8034-HD

Place of Origin:China

... 0.001N Moving speed 100mm/min Power off storage Available Power supply AC220/50Hz(Can be customized) Sensor High precision force sensor (with software and hardware protection functions)

Brand Name:SAMYON

Model Number:SY

Place of Origin:CN

...Force Tester For Checking Strengthening Concrete Structure SY-10T/20T/30T Anchorage Force Tester Application: It is suitable for testing the anchorage force of several of anchor shank, rebar and expansion bolts, also the pull force of glass block screen wall. The anchorage test range will be from diameter 6mm to 40mm, and bolt diameter will be from M6 to M27. It is used to do verification for the anchoraging force...