480 m2 weight brick wall mesh

Brand Name:JIAFU

Model Number:JFBRS380

Place of Origin:ANPING HEBEI CHINA

480/M2 Weight 20cm Width Galvanized Brick Wall Mesh 18m Length Brick Wall Mesh is made of hot dipped plate.This type the weight is 480g/m2 .We can produce the width less than 20m. This Product is easily to cut.It use primarily as an anti-cracking reinforcement in the construction of brick and block masonry. Coil mesh is available in a variety of widths to suit most wall...

Brand Name:ERIC

Model Number:ER-87

Place of Origin:ANPING

Material Wire Dia. Aperture Thickness Weight Carbon steel 0.9mm 6.3mm 3/16" 5.8mm 4.0 kgs/m2 1.2mm 8.5mm 1/4" 7.1mm 6.0 kgs/m2 1.0mm 6.8mm 1/4" 6.5mm 5.5 kgs/m2 Stainless steel 1.0mm 8.4mm 1/4" 6.7mm 3.5 kgs/m2 1.2mm 6.8mm 3/16" 6.5mm 5.8 kgs/m2 1.2mm 8....

Brand Name:SCX

Model Number:P3.91-7.82

Place of Origin:China

... is full aluminum extruded,Ultra-thin and lighteright,unit thickness is only 65mm,weight is 12kg/m2,hollow design,Ventilation transparent,the permeability is 35%,which has a strong resistance for wind pressure. 2, High brightness,Whole screen is easy to

Brand Name:HUAZE

Place of Origin:CHINA

... by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades, as well as use on internal wall and ceiling surfaces. This material is widely used for fastening the surface layer at the

Brand Name:huihao

Model Number:Expanded metal scren

Place of Origin:China

...Mesh Facades, 1200X2400MM Frame Aluminum Curtain Walls technical data of Building Expanded Metal Mesh Facades/Frame Aluminum Curtain Walls mesh material-expanded mesh Mesh SWDxLWD Strand width thickness Total thickness DimensionHmax Weight Alu Weight M.GS.Steel Open area (MM) (MM) (MM) (MM) (MM) (kg/m2) (kg/m2...

Brand Name:Yuntong

Model Number:YT-EX-AL

Place of Origin:Hebei

... 1.0MM 0.6M 2.0M 1.0KG/M2 0.8MM 10MM 25MM 1.0MM 0.6M 2.0M 1.25KG/M2 1.0MM 10MM 25MM 1.1MM 0.6M 2.0M 1.77KG/M2 1.0MM 15MM 40MM 1.5MM 2.0M 4.0M 1.85KG/M2 1.2MM 10Mm 25MM 1.1MM 2.0M 4.0M 2

Brand Name:TALIN

Model Number:70x90mm ,60x80mm ,80x100mm,100x120mm

Place of Origin:MADE IN CHINA

STONE CAGE WIRE MESH ,GABION BASKET ,GABION BOX ,PVC COATED GABION MESH ,GALFAN GABION MESH Gabion Box Specifications: Zinc or PVC coated gabion. Mesh size 80 mm × 100 mm. Mesh wire dia. 2.7 mm (zinc coating weight min. 260 g/m2). selvedge wire diameter...

Brand Name:HUIHAOCUSTOM

Model Number:AL-1006/1208

Place of Origin:CHINA

...Mesh Curtains for Architectural Wall Cladding Technical data of metal wire mesh curtain​ Material Wire diameter Aperture Thickness Weight Carbon steel 0.9mm 6.3mm 3/16″ 5.8mm 4.0kg/m2 1.2mm 8.5mm 1/4″ 7.1mm 6.0kg/m2 1.0mm 6.8mm 1/4″ 6.5mm 5.5kg/m2 Stainless steel 1.0mm 8.4mm 1/4″ 6.7mm 3.5kg/m2 1.2mm 6.8mm 3/16″ 6.5mm 5.8kg/m2 1.2mm 8.5mm 1/4″ 7.1mm 5.0kg/m2...

Brand Name:XMESH

Model Number:QJ20200908137

Place of Origin:CHINA

...used as load-bearing walls, non-load-bearing walls and floors, balconies and so on. It has features of expanding building area (10% -15%), fire resistant, noise insulation, heat insulation, earthquake resistanct, waterproof and light weight etc. All these

Place of Origin:Shanghai China

Brand Name:SPRING

Model Number:DPP

... widely used in wall brick, the floor tile, porcelain arts and crafts etc. Specification Polyester Printing Mesh Model Specification (/cm) Mesh count (/inch) Thread Diameter (um) Mesh opening (um) Open Area (%) Thickness (um) Theoretic Ink Volume (cm3/m2)

Brand Name:Hengquan

Model Number:HQ-008

Place of Origin:China

... steel wire or the above steel wire covered with PVC using mechanical weaving.The tensile strength of the steel wire of the gabion mesh is not less than 38kg/m2, the weight of the metal coating is generally higher than 245g/m2, and the diameter of the

Brand Name:Shuxin

Model Number:SX-1

Place of Origin:Hebei, China

... >245g/m2 2.0mm >215g/m2 3m 1m 1m Selvedge wire diameter Gal. weight Selvedge wire diameter Gal. weight 4m 1m 1m 3.4mm >265g/m2 2.7mm >245g/m2 6m 1m 1m Lacing wire 2.7mm Lacing wire 2.0mm . Specification 1.

Brand Name:FZ

Model Number:DNW-20Q

Place of Origin:China

...Wall Panel Mesh Steel Wire Welding Machine 3D version of the material Concrete Reinforcement Wall Panel Mesh Steel Wire Welding Machine application fields: it can be replace brick wall, do all kinds of load-bearing wall, non-bearing wall and floor board and so on. It has the characteristics of insulation, acoustic insulation, earthquake resistant, waterproof, simple construction and light weight...

Brand Name:Hehang

Model Number:FM-06

Place of Origin:China

...Wall Reinforced Fiberglass Mesh Fiberglass Mesh Description Fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, and gypsum and so on. Weight (gr/m2) Mesh...

Brand Name:YS

Model Number:YS-FM-06

Place of Origin:China

... in three different Tensile Strengths: 300N, 500N, and 800N, making it suitable for a wide range of applications. The higher the Tensile Strength, the stronger the mesh, and the more weight it can support. The Fiberglass Mesh is available in a variety of

Brand Name:NOVA

Place of Origin:CHINA

... 0.035 0.11 240 400 45 0.65 RPD 17 625x133 17 20- 24 0.04 0.13 210 480 51 0.85 RPD 25 600x100 25 34- 38 0.04 0.14 205 425 56 0

Place of Origin:Hengshui,China

Brand Name:QIANPU

...Mesh Filter Material 304/316/316L Micron Rate 2-300µm Pressure Range 1.5-3MPa Max Temperature 480℃ Feature Higher mechanical strength, Better backwash efficiency, Lower pressure drop loss Application Water treatment, Beverage, Food, Metallurgy, Chemical and Pharmaceutical Table of Plain Weave Sintered Mesh Technical Parameters Structure Filter rating (u) Thickness (mm) Weight (kg/ m2...

Model Number:HH-GLMI-02

Place of Origin:China

Wall Hanging 3D Art Wire Mesh Make 3D effect products with different shapes according to customers' needs. Mainly used for indoor and outdoor decoration. Quick details of Wall Hanging 3D Art Wire Mesh Material: stainless steel wire, copper wire, brass wire, aluminum wire Color: green, red, gold, blue or others Mesh Width: less than 4000mm Mesh Length: to be your request Mesh weight: 0.8kgs/m2 Mesh...

Brand Name:HBGB

Model Number:GB-0014

Place of Origin:China

...Wall Plaster C Glass Fiberglass Wire Mesh Fiberglass wire mesh description: 1.Material: fiberglass yarn, modified acrylate copolymer glue. 2.Yarn type: C-glass 3.Mesh size: 4 × 4, 5 × 5, 7 × 7, 8 × 8, up to 12 × 12 mm. 4.Mesh shape: square. 5.Width: 0.2–2.5 m. 6.Roll length: 20–500 m. 7.Strength retention rate: ≥ 90%. 8.Weight:45-160g/m2. 9.Color: white (normal), orange, blue, green, any colors available. Fiberglass wire mesh