2xn lightwave circuit fiber optic splitters

Brand Name:FOCABLE

Model Number:1 × 32 PLC Splitter Module

Place of Origin:China

... device based on quartz substrate. It has the advantages of small volume, wide bandwidth, high reliability, excellent uniformity. Optical fiber splitter is especially suitable for passive optical networks (EPON, BPON, GPON) which is connected with

Brand Name:KELONG

Place of Origin:CHINA

...Lightwave Circuit Fiber Optic Splitter For PON Transmission PLC Splitter Same as cable transmission system,optical network system also need signal coupling,branching and distribution,splitters can meet these functions.Splitter is the important device in PON transmission system,splitters can make the input optical signal into multiple output optical...

Brand Name:SHKE

Place of Origin:China

...Fiber Optic Splitter-2xN mini type Planar Light-wave Circuit Description: Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. Mini type PLC splitter has stronger fiber protection than bare fiber splitter...

Brand Name:H-LIN

Model Number:2*N

Place of Origin:Shenzhen China

... using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. H-LIN provides whole

Brand Name:TTI

Model Number:S-1

Place of Origin:China

...Fiber Optic Splitter 1x4 PLC Splitters 1650 nm 1. Description: PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. TTI fiber optic plc splitters offer superior optical

Brand Name:Geehe or OEM

Model Number:GH-PLC-1×4

Place of Origin:China Mainland

... Deposition (P-CVD) technology and its patented fabrication process for providing stable optical character. 1xN and 2XN Splitter features guaranteed performance specifications and high reliability that surpass Telcordia requirements and is tailored for

Brand Name:New Light

Model Number:LC/ST/FC/SC/E2000

Place of Origin:China

...Fiber Optical Splitter WDM 0.9 / 2.0 / 3.0 mm PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. DYSFO’ PLC splitter offers superior optical

Brand Name:KCO

Model Number:KCO-Mini-1x2-SCA-White-1.0

Place of Origin:Guangdong, China

...Fiber Optic Splitter PLC SC/APC 0.9mm 1.0m LSZH White Tube Description: - Fiber optic PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. - PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. - Our PLC splitter...

Brand Name:UNIFIBER

Model Number:PLC

Place of Origin:CHINA

...) splitter with different package of 250um bare fiber type,0.9mm MINI steel tube type, ABS box type, Rack Mounted type, Cassette type for options.it is a type of optical power management device that is fabricated using silica optical waveguide technology.

Brand Name:DAMU

Model Number:SCAPC 1X8 PLC WO

Place of Origin:CHINA

fiber optical splitter 1*16 mini tube without connector bare PLC Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. DAMU provides whole series of 1xN and 2xN

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-Mini-2*4-SCA

Place of Origin:Guangdong, China

...Optic PLC Splitter Fibra Optica Splitter SC/APC Green Connector 0.9mm 2.0m Descriptions: Fiber optic PLC splitter can be categorized by the PLC splitter chip they use, meaning there are 1xN and 2xN PLC splitters, such as 1x4, 1x8, 1x16, 2x32, 2x64, etc. Installers can choose different input and output numbers depending on subscriber conditions or cable length. PLC (Planar lightwave circuit) splitter is a type of optical...

Brand Name:OMC or OEM

Model Number:1*12 ABS Box Type PLC Splitter

Place of Origin:China

Single Mode ABS Box Fiber Optic Splitter 1x12 Planar Lightwave Circuit Splitter Single Mode Fiber Optical ABS Box Type PLC 1*12 Fiber Splitter Fiber Optic ABS Box PLC Splitter Planar lightwave circuit (PLC) splitter is an optical power distribution device ...

Brand Name:Seacent

Model Number:1x32

Place of Origin:Guangdong,China

... optical splitter are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. The 1x16 optical splitter with 1 input and 16 output fibers with an even split ratio across all fibers regardless of input wavelength.

Brand Name:OPTFOCUS

Model Number:1*16 PLC Splitter

Place of Origin:Guangdong, China (Mainland)

...Optical PLC Splitter SC/UPC Optical Fiber Splitter Description of PLC Splitter PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical...

Brand Name:Geto Telecom

Model Number:FOP12SC1

Place of Origin:China

...splitter is based on plannar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical...

Place of Origin:Shenzhen,China

Brand Name:GT-1*16 PLC

Model Number:1*16(SC)

...a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. We provides whole series of 1xN and 2xN splitter products that are

Brand Name:DYS/OEM

Model Number:2*32 PLC

Place of Origin:shenzhen

...fiber optic splitter Description: PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical signal distribution currently. DYSFO’ PLC splitter offers superior optical...

Brand Name:Yogel

Model Number:2x8 PLC Mini SC APC

Place of Origin:Shanghai

...splitter 900um steel tube type fiber optic splitter Description PLC Splitter means planar lightwave circuit splitter, which is based on planar light wave technology, widely used in FTTX,EPOM,BPON,GPON .We launched 1xN,2XN PLC splitter with consistent performance, low optical...

Brand Name:Takfly/OEM

Model Number:32 ports rack mount PLC Splitter

Place of Origin:Shenzhen, China

..., high reliability and small size, and it is widely used in PON EPON, GPON, and future PON networks to realize optical signal power management. Takfly provides a whole series of 1xN and 2xN splitters from 1×2, to 1×64, 1×128 that are tailored for

Brand Name:KEXINT

Model Number:PLC-1*16-SC/APC

Place of Origin:SHENZHEN

...Fiber Optical Splitter SC/APC 1×16 ABS BOX Splitter G657A1 13.7 dB 1. PLC 1×16 Single Mode Fiber Optical Splitter SC/APC Connector splitter plc Neutral package or Customzied packing way. then put into a carton. 2 .PLC (Planar Lightwave Circuit) splitters are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. It is based on planar lightwave circuit...