245fa blowing agent polyols

Brand Name:Joyway

Model Number:JYA-1024

Place of Origin:China

... oil and other addtive which applies to the Ice box, hotpot ect. The blowing agent of this blend polyol is 245FA which is total eco friendly. The characteristics of the products are as follows: -- Excellent flowability, the density of the foam is well

Place of Origin:China

VP-IR04 blend polyols and isocyanate react to be foam with good flame retardant performance,good insulation effect, light quality, higher compressive strength. The blowing agent is HFC-245fa as environmental friendly blowing agent.The products are widely ...

Place of Origin:China

Brand Name:HENBINCOOL

Cyclopentane Blowing Agent for Refrigerator and Frezzer Insulation, CAS # 287-92-3, 99.5% Product Description Product Description As a new blowing agent for rigid polyurethane foam, cyclopentane is used to replace chlorofluorocarbons (CFCs) that have a ...

Brand Name:ZHX/OEM/ODM

Place of Origin:China

Free Of Chemical Blowing Agents EPS Helmet Not Easy To Wear And Tear EPS Helmet Wearing introduction: An uncomfortable helmet can be seriously distracting and can seriously impair your ability to function at your optimum level. If you're in a situation whe...

Brand Name:EXCEEDCHEM

Model Number:Polyether Polyols for Household Appliance Series

Place of Origin:China

Household Appliance Polyether Polyol 1. Description This series of polyether polyols is special for household appliance series products. 2. Typical foam properties Type C1101 C3101 C4101 C5101 Types of blowing agent H2O CP or CP/IP CP/HFC-245fa CP/HFO POL:...

Brand Name:DAHUA

Model Number:SETALUX 1151 XX-51

Place of Origin:guangdong

...Acrylic Polyol Colour: 18 Max Viscosity @ 25°C: 2620 Equivalent: 255 Specific Gravity @ 21°C: 1.02 Amine Value: 175 Recommended Use Level: 130-140 Highlight: phenalkamine epoxy curing agent , polyamine epoxy hardener , epoxy curing agent with warranty...

Brand Name:LIHONG

Model Number:LH-3000 LH-3035

Place of Origin:China

...Polyol PPG3000 polyurethane foam — Product Application — Polyether polyols (referred to as polyethers) are prepared by adding polymerization of starting agent (compound containing active hydrogen groups) and propylene oxide (PO), butane oxide (BO) in the presence of catalyst. The largest yield of polyether is glycerol (glycerol) as the starting agent...

Brand Name:Lubekote

Model Number:LubeKote

Place of Origin:China

...use form and should be added directly to the Polyol or Isocyanate components. One of its remarkable features is its ability to produce excellent matte surfaces on the manufactured parts. As a result, these parts can be painted directly without the need for

Brand Name:CHEMICAL--YY

Model Number:POLIOL

Place of Origin:CHINA

Product Description: With a solid content of 25%, this Polyether Polyol product is capable of delivering outstanding performance and results. It has excellent reactivity and compatibility with other materials, making it an ideal choice for pipeline ...

Brand Name:WeiLi Resin®

Model Number:SE6770

Place of Origin:China

... two-component polyurethane coatings when mixed with aliphatic isocyanate curing agents. Key Characteristics Hydroxyl Content: The 3.0% hydroxyl content provides good reactivity, allowing it to effectively cross-link with isocyanate curing agents. This

Brand Name:Dawson

Model Number:ABLB90-30L

Place of Origin:Jiangsu Zhangjiagang

... like Thailand, Malaysia, Indonesia, Vietnam, Uzbekistan, USA, Mexico, Brazil, and Pakistan. With global sales network, our local offies and agents can provide more convenient and sincere services. 1: Agent In Worldwide Setting Up

Brand Name:DR

Model Number:DR-1098T

Place of Origin:Made in China

...Agent For Sewage Treatment Defoamer DR-1098T is a concentrate of antifoaming agent that can be diluted. The antifoam can achieve long-lasting antifoaming performance in small amounts. Composition of defoamer: Composed of polyether-modified polysiloxane, polyether polyol...

Place of Origin:CHINA

Brand Name:SIMIS

...Blow Bar Specification: 1. High Chromium Blow Bar 2. Long service life 3. Tailored design 4. OEM available 5. Competitive price High Chromium Blow Bar Features: 1. Imply the external refining technology, effectively reduced the harmful elements, impurity and oxygen and hydrogen harm, greatly enhanced the abrasion resistance and impact toughness of the steel 2. Using proprietary metamorphic agent...

Brand Name:wenyou

Model Number:9205D

Place of Origin:China

...free modified polyol. epoxy resin and curing agent for vacuum casting Indoor composite transformer Applications Indoor electrical insulators for medium and high voltage applications, such as insulators, dry-...

Brand Name:JWIM

Model Number:DGD-330

Place of Origin:CHN

DGD-330 automatic horizontal bag bag machine General information: DGD-330 automatic horizontal bag bagging machine includes bag picking mechanism, bag opening mechanism, blowing mechanism, blowing mechanism, bag opening testing mechanism, filling mechanism...

Brand Name:Zhuhai Feiyang

Model Number:GB963A-100

Place of Origin:Zhuhai,

... by polyester polyol and aliphatic isocyanate. PROPERTY This product has a very low viscosity and can be used to make high-solids weather-resistant topcoats. This product has good ...

Brand Name:beiyang

Model Number:SJ45*25-sm500

Place of Origin:shanghai

45 level blowing machine--Product thickness 0.025-0.07mm Packaging & Delivery Prompt deliver at the very day. Sophisticated and professional logistic agent. Well-trained and disciplined packing team. Quick details: Unit-type SJ45-Sm500 Extruder-type ...

Brand Name:RQT

Model Number:RQT-CK-1

Place of Origin:China

...agent CK-1, made of high-quality and high-end materials, solves the problem of uneven mixing of powder whitening agents. It is heat-resistant and can replace ordinary fluorescent enhancers. This product is efficient, safe, and environmentally friendly. Purpose: Used for plastic products, suitable for various processes (extrusion, injection molding, blow...

Brand Name:PLYFIT

Model Number:D0201

Place of Origin:Guangdong,China

... is not required, including injection and compression molding of ABS, acrylic, epoxy resins, HDPE, Noryl, nylon, Polyproplyene, polysulfone, and wax, as well as blow molding, extruders, foundries, and

Brand Name:YANYE/BAOFENG/JIANGFANG

Model Number:YCT/YNT/SPL/CLA

Place of Origin:Shanghai/jIANGSU

NH3 Evaporative condenser .R404A Evaporative Condenser R717 Evaporative Condenser R22 Evaporative condenser: 1 Work Principle of evaporative condensers 2.1.1 Wind Cooling: YZTL series evaporative condenser uses water and air as Cooling agent.The cooling ...