1x2 mechanical optical switch

Brand Name:GEZHI or OEM

Model Number:GZ-FSW-1x2-W

Place of Origin:China

... with easy operation. Its connect with 5V DC power. The Non-lathing SM 1x2 mechanical optical module connects optical channel by redirecting an incoming optical signal into a selected output fiber. GEZHI 1x2 SM mechanical optical switch is application in

Brand Name:GEZHI or OEM

Model Number:GZ-1x2 Optical Switch

Place of Origin:China

...o a selected output fiber. GEZHI Photonics’ 1x2 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are

Brand Name:UNIFIBER-OEM

Model Number:1x2

Place of Origin:CHINA

... loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations. Features ♦ Low Insertion loss ♦

Brand Name:KEXINT

Model Number:KXT-FSW

Place of Origin:SHENZHEN

... route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its

Place of Origin:China

Brand Name:HTD

1X2 Fiber Optic Switch Non-Latching Module Single Mode Features: 1. Low insertion loss 2. Wide wavelength range 3. Low crosstalk 4. High stability and reliability 5. Epoxy-free optical path 6. Latching and non-latching Application: 1.R&D in laboratory 2.System monitoring 3.Configurable OADM 4.Metropolitan area networks 5.Component testing 6.Fiber sensor Pins Definitions Pins Defining Optical...

Brand Name:HJY

Model Number:HJY-FSW-D1X2B-SM-2

Place of Origin:China

... an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been

Brand Name:Linkopto , or OEM

Model Number:Metal case 1x2 fiber Optical Switch

Place of Origin:China

...Mechanical Metal case 1x2 Fiber Optical Switch LP-OSW-1×2 Optical Switch, which is famous for its high performance, low insertion loss and compact dimension: (L)27.0×(W)12×(H)8.2mm. It is an ideal component for OADM,OXC,system monitoring and protection. With compact package, it can be easy to integrate into a high density optical...

Brand Name:yingda

Model Number:YDPLC-AM-102-FAFA-1515

Place of Origin:china

...1x2 Fiber Optic Plc Splitter 1x2 ABS PLC Optical Splitter Module FC/APC Single mode G657A1 LSZH 2.0mm Yellow Blister Pack 1X2 ABS SPLITTER is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical...

Brand Name:Geehe Comm

Model Number:GH-FO-1×2

Place of Origin:Wuhan China

...1x2 Fiber Optic Coupler Optic Coupler Brief Introduces: 1x2 Polarization Maintaining (PM) fiber optic coupler is used for monitoring or splitting optical signals in Polarization Maintaining fiber. The coupling ratio from 1% to 99 %. Geehe as the No.2 fiber optic coupler manufacturer in Asian- Pacific region, has been proven advanced micro-optic...

Place of Origin:shenzhen

Brand Name:DYS/OEM

Model Number:70/30 coupler Optical Fiber Splitter

1x2 Fiber optic splitting ratio:70/30 coupler Optical Fiber Splitter 1. Applications: ---Telecommunication systems ---Digital,Hybrid and AM-Vedio System ---Fiber Sensors ---Monitoring system ---CATV system 2. Features: ---Uniform Power Splitting ---Compact Size --- High stabity and reliability ---Standard: Rohs Compliants ---Low insert loss ---Single Fusion Design 3. Technical specification: Parameter 1x2...

Brand Name:BT-PON

Model Number:LC-SC

Place of Origin:China

... and 64. And we produce 3 different type spliter PLC, such as micro tube, insert box type and ABS plastic box type. Optical splitter micro tube type refers to the port 0.9 mm slip-on fiber multi channel direct output with a compact design and ...

Brand Name:JUNPU

Model Number:splitter SC APC 1X2

Place of Origin:China

...1x2 Color Optical Fiber Optic Splitter LSZH GT657A1 Description: It is mainly used in corridors or outdoor FTTH fiber splitting points. It’s suitable for primary or secondary optical FTTH splitting and has an obvious advantage over secondary optical splitting. Planar Lightwave Circuit (PLC) Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical...

Brand Name:Begate

Model Number:1X2 mini steel type PLC splitter with SC APC

Place of Origin:Shenzhen, China

... optical signals to multiple locations for processing. In optical networks, it is often necessary to split an optical signal into many identical signals, or to combine many signals into a single signal. PLC Splitter (Planar lightwave circuit splitter) is a

Brand Name:KCO, Kocent Optec Limited

Model Number:FBT-MM-3.0

Place of Origin:China

...1x2 Fiber Optic Fused Splitter MM FBT Coupler Quick informations: Name: FBT coupler Cable diameter: 2.0mm, 3.0mm Cable length: 1.0m Terminal connecter: FC, SC, LC or optional Rate: 10/90 or customer request Pack: ABS box Description: Dual Window Wideband Couplers are high quality components designed to divide or combine optical signal in optical...

Brand Name:KCO

Model Number:KCO-Mini-1x2-SCA-White-1.0

Place of Origin:Guangdong, China

...1x2 Fiber Optic Splitter PLC SC/APC 0.9mm 1.0m LSZH White Tube Description: - Fiber optic PLC splitter is based on planar Lightwave circuit technology and precision aligning process, can divide a single/dual optical input(s) into multiple optical outputs uniformly and is denoted 1xN or 2xN. - PLC splitter is applied in FTTX deployments, PON networks, CATV links and optical...

Brand Name:FOCC

Model Number:FOCC-SP007

Place of Origin:China

...1x2 Fiber Optic Planar Lightwave Circuit Splitter for FTTX / CATV Planar lightwave circuit (PLC) splitter is fabricated using silica optical waveguide technology. Fiber optic splitter and coupler are used to split or combine optical signals in various kinds of networks, it features wide operating wavelength range, good channel-to-channel uniformity, high reliability and small size, and is widely used in PON networks to realize optical

Brand Name:Seacent

Model Number:1x2 micro type

Place of Origin:Guangdong , China

Micro Type 1x2 Fiber Optic PLC Splitter With SC/APC Connector Features: Low loss and stable polarization Compact design Good channel uniformity ...

Brand Name:Fujioptic

Model Number:CWDM/DWDM/FWDM

Place of Origin:Wuhan, China

...1x2 Passive Optical Splitter For CATV Multiplexer Triplexer Device Optical FWDM Device FWDM can realize the multiplexing and demultiplexing between two communication channel .It can expand the capacity of single fiber to achieve bidirectional communication, which can widely used in optical...

Brand Name:Wuhan Etern Optoelectronics

Model Number:ETERN Fiber-Optical Switch Mini 1X4, 1X8

Place of Origin:China

...ing part position sensitivity. It featuresexcellent mechanical and optical performance and unify different switch configuration of Mini 1x4 and Mini 1x8 onto the same compact package. The products are Telcordia GR-1073-CORE qualified, and RoHS complaint.