14mm s hot wire tester

Brand Name:JINHAIHU

Model Number:ZRS-2

Place of Origin:BEIJING, CHINA

ZRS-2 Hot wire tester Scope of application The heating wire tester heats the specified material (Ni80/Cr20) and the shape of the heating wire (Φ4mm nickel-chromium wire) to the test temperature (550℃~960℃) 1 min, then sets the pressure (0.95±0.1 N)30...

Brand Name:JINHAIHU

Model Number:ZRS-2

Place of Origin:BEIJING, CHINA

ZRS-2 Hot wire tester Scope of application: The Heating Wire Tester heats the specified material (Ni80/Cr20) and heating wire shape (Φ4mm nickel-chromium wire) to the test temperature (550℃~960℃) for 1 minute, then applies pressure (0.95±0.1 N) for ...

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:China

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts ...

Brand Name:HeJin

Model Number:GW-2

Place of Origin:China

...hot wire tester complies with the international standard IEC 60695-2-12 Luminescent filament Φ4mm ± 0.04mm (> 77% Ni/20 ± 1% Cr) Standard of Glow Wire Tester: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure; IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire

Brand Name:HOOHA

Model Number:ZY6055

Place of Origin:Guangdong

... within the device may be ignited by a hot wire or a hot element. Under certain conditions, such as the failure current, component overload, and adverse contact of the conductor, some elements will reach a certain temperature and ignite the parts ...

Brand Name:GESTER

Model Number:GT-MC38

Place of Origin:China

Hot Wire Ignition Tester Product Introduction Standards: IEC60950, GB4943, IEC 60477-1 clause 5.2.5.4 Feature Programmable control system Precision adjustable power supply Imported aluminum fixture Equipped with test ventilation device One-button timing ...

Brand Name:Lonroy

Model Number:LRX-3

Place of Origin:China

...-3 thermal conductivity tester employs the transient hot wire method, including the cross-line method and the parallel-line method. It mainly measures the thermal conductivity, thermal diffusivity (heat ...

Place of Origin:China

...14mm Round, straight no twisted, light and smooth for Hot Rolled Wire Rod stainless steel non alloyed Hot Rolled Wire Rod It's widely used in construction or daily use as binding material. Besides, Mainly used in construction, mining, chemical, welded mesh, welded hangers, and then processing. Soft annealed wire, increase flexibility, doing construction tie wire, and has good steel banding. Product Name Hot

Brand Name:Hengquan

Model Number:various

Place of Origin:Hebei, China

...carbon iron wire, the mesh is firm in structure and has flat surface. it is extensively used in industrial and agricultural constructuons as reinforcemnet and fencing. it is also used as fence for poultry ...

Brand Name:HongCe

Model Number:HWI-1

Place of Origin:China

...Hot Wire Ignition Independent Exhaust Tester With Electrical Control Products Introduction The hot wire ignition tester is designed and manufactured according to the requirements of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot...

Brand Name:KINGPO

Place of Origin:Mainland China

... of the "Glow Wire Ignition Test Method" in relevant standards. It is suitable for the ignition risk test of electrical and electronic products and household appliances, and simulates heat sources such as hot components or overload resistors. The

Brand Name:YUYANG

Model Number:YYF050

Place of Origin:China

...Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.Hot-wire...

Brand Name:HAIDA

Model Number:HD-60085

Place of Origin:Guangdong, China (Mainland)

HD-KDRX-II Thermal Conductivity Tester (Hot Wire Method) Description: The hot wire thermal conductivity tester (transient method) is measured using the line source test method of the thermal probe. This thermal probe has a very large aspect ratio to ...

Brand Name:lixian

Model Number:HZ-7046

Place of Origin:China

Electronic Instruments Glow Wire Tester Equipment Hot Into The Depth 7mm + 0.5mm (Adjustable) Precision Class: 0.5 Glow Wire Tester Equipment summary: The glow wire test apparatus using test box part and control part integration design, convenient ...

Brand Name:SHUOBODA

Model Number:TCT-2X

Place of Origin:China

...hot-wire method thermal conductivity tester Quickly measure the thermal conductivity of plastics, soil, soft rock, liquids, pastes, granules, powders and other materials using the hot-wire method. Sample shape: block, flake, paste, powder, granule, colloid, or liquid (round, square, or irregular shapes are acceptable, no restrictions on shape), as long as there is a relatively flat sample surface. Description The hot-wire

Model Number:SN778

Place of Origin:China

Brand Name:Sinuo

IEC 60695-2-20 UL 746C Hot Wire Ignition Tester for Electrical Components Product information Hot wire ignition test apparatus conforms to IEC60695-2-20-1995, ASTMD3874-1997, IEC60950-1999, UL746A-2000, UL746C-2000, ...

Place of Origin:China

Brand Name:CHENGFENG

Product Description Glow wire testing machine Technical parameters: 1. Hot wire temperature: 500 ~ 1000℃ adjustable 2. Temperature tolerance: 500 ~ 750℃ ±10℃, > 750 ~ 1000℃ ±15℃ 3. Temperature measuring instrument accuracy ±0.5 4. Scorching time: 0-99 ...

Brand Name:BAXIT

Model Number:BXT-GW

Place of Origin:Shanghai, China(mainland)

...Wire Tester Glow wire tester is designed and manufactured according to the requirements of "Glow Wire Test Method" in IEC60695, GB5169.10-11 and GB4706.1. It is suitable for electric fire electronic products, household appliances and their materials for ignition hazard test, simulating hot...

Brand Name:HTI

Model Number:HTE-007A

Place of Origin:Guangdong,China(Mainland)

...wire test apparatus and general test program and GB5169.10, UL 746 a, IEC829 VDE0471 standards such as use of no flame light-off source program simulation test project. Glow wire tester would stipulate Ni80 / Cr20) material and shape of the heating wire in