1 25 wellhead pressure control equipment

Brand Name:Techcore

Model Number:FPG130-105

Place of Origin:CHINA

... the wireline tool string to be run or retrieved from a well bore under pressure. The lightweight lubricator can be applied for singly also can use multiply according to the requirement of the oilfield wireline operation, and the seal control head always

Brand Name:ZZ TOP OIL TOOLS

Model Number:FPG14-70

Place of Origin:China

... wireline tool string into and out of the well under pressure. Normally position on top of wireline valve, lubricator comes in three section-upper, middle, lower; to provide adequate length for wireline tool string to be raised above wellhead, enabling the

Brand Name:JC Wellhead

Model Number:13 5/8" x 5000psi Drilling Spool

Place of Origin:China

... work.The spool is made of alloy steel and heat-treated. It is used on the oil and gas well which is with a pressure of less than 105Mpa. It is tested according to ((SY/T5053.1-2000 BOP and control equipment, BOP)) before shipping to be used safely. The

Brand Name:Ruixin

Model Number:0.125inch

Place of Origin:China Baoji

Wireline Clamp Wellhead Wireline Pressure Control I.Introduction: The wire clamp (wire clamp/cable clamp) is a tool for temporarily clamping the wire/cable when lifting the blowout pipe at the wellhead. It is often used to clamp steel wires or cables on ...

Brand Name:Lake

Model Number:All models

Place of Origin:China

API 16A well control equipment annular BOP/blowout preventor Product Description API 16A Annular blowout preventer is manipulated by hydraulic control system. When it is shut off, high pressure oil flows into piston underside closed cavity through the oil ...

Brand Name:HUIFENG

Model Number:WCP-70

Place of Origin:China

PSL1-PSL4 Wellhead Control Panel for oil and gas field safety Product Introduction The wellhead control system will unify the design and supply of wellhead devices such as the Christmas tree safety valve, downhole safety valve, wellhead control panel, RTU ...

Brand Name:RZY

Shaffer Bolt-Cover Spherical Blowout Preventer (BOP) 1. Overview The Shaffer Bolt-Cover Spherical BOP is a high-reliability annular pressure control equipment which is designed for oil and gas drilling operations. As a key well control equipment, it ...

Brand Name:Hebei Pantu

Model Number:2FZ18-35

Place of Origin:China

179.4mm 35Mpa Double Ram Bop Rig Well Control During oil drilling, Double Ram Bop is installed on the wellhead casing head to control high-pressure oil, gas, and water blowout devices. When the oil and gas pressure in the well is high, the blowout ...

Brand Name:KOKO SHOP

Model Number:EB150

Place of Origin:China

... shorter 2.Hook back things conveniently 3.Maintenance-free Top Type 1.Easy to loCATEEEEEEEEEEEEEEe and control 2.More conducive to excavator 3.Weight lighter, lower risk of broken drill rod Model Weight (Kg) Length (Mm) Pressure (kg/cm2) Flux (L/Min)

Brand Name:STAUFF

Model Number:DS63-25MPA

Place of Origin:Chang sha China

Product details and advantages: The pressure gauge for Sany Heavy Industry pump trucks, vehicle-mounted pumps, and trailer pump accessories, model DS63-25MPA, provides accurate pressure measurement capabilities essential for monitoring hydraulic systems....

Brand Name:PYZS

....It is used on both surface and subsea well to control and regulate oil production management and other operations. x-tree is a key equipment to control the pressure in wellhead and adjust the flow rate of Pressure in oil/gas production operation. . It

Brand Name:CCSC

Model Number:Casing head

Place of Origin:China

...pressure Wellhead Christmas Tree Casing Head is the very important equipment used in drilling process. casing head can control the wellhead pressure,casing head are often welded or screwed on the top of the conductor pipe or the casing then become a part of the wellhead...

Brand Name:CCSC

Model Number:casing head - casing head spool

Place of Origin:China

...wellhead pressure,casing head are often welded or screwed on the top of the conductor pipe or the casing then become a part of the wellhead system of the oil well. Casing Head has a straight bore bowl with 45°landing shoulder design which avoids damage to

Place of Origin:CHINA

Conventional wellhead Rated Working Pressure 2000-­25000psi Descriptions of Conventional wellhead Rated Working Pressure 2000-­25000psi : We manufacture standard structural casing head with casing hanger installed in the body. Casing hanger can be chosen...

Brand Name:TR Solids Control

Model Number:TR-AQF

Place of Origin:Xi'an City, China

... the valve, when the wellhead equipments suffer from dangerous pressure, control system relief the pressure of cylinder after receiving the signal sent by sensor, spring push stem to close valve and wellhead equipments, ensure the equipment safety. Xi'an

Model Number:3 1/8"--26 3/4"

Place of Origin:China

API 6A Wellhead 3-1/8" To 26-3/4" Adapter Spools Spacer Spools Riser Flange Or Spacer Flange API 6A Wellhead 3-1/8" To 26-3/4" Adapter Spools Spacer Spools Riser Flange Or Spacer Flange Description of Spacer Spool: API 6A Standard Spacer Spools Riser ...

Brand Name:SHRT

Model Number:Back Pressure Valve

Place of Origin:SHANGHAI IN CHINA

Back Pressure Valve: There are two kinds of BPV, one-way and two-way. The one-way BPV provide circulating drill fluids downwards and shutting off pressure from down hole. When coming to pressure test for Christmas tree under tubing hanger. BPV adopts ...