0 25nm socket outlet torque tester

Brand Name:HongCe

Model Number:HC9908

Place of Origin:China

...Socket Tester - Socket Outlet Torque Tester 0.25 Nm Product information: The torque tester conforms to the standard of IEC 60335-1 Clause 22.3, IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets...

Brand Name:kingpo

Model Number:KP-LJ2

Place of Origin:china

... apparatus as shown in IEC60065 Figure 11. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus pivots about a horizontal axis through

Brand Name:SHC

Model Number:SC-NJ01

Place of Origin:China

...Socket Outlet Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/Equipment is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets...

Brand Name:Sinuo

Model Number:SN2124

Place of Origin:China

IEC 60884-1 Clause 24.3 Rigid Steel Sheet Test Cylinder for Socket-outlet Torque Test Product information: The test cylinder meets the requirements of IEC 60884-1 2013 clause 24.3, IEC 60669-1 clause 20.2. It is used to check the reliability of the fixed ...

Brand Name:HeJin

Model Number:HC9918

Place of Origin:China

...’ clause 23.2 Application: This device is used for testing the wear resistance ability of flexing cable with protective sheath of plug, portable socket-outlet, fixed accessories with conductor and connectors, not including the

Model Number:SNQC1007

Place of Origin:China

Brand Name:Sinuo

...Torque Tester for Charging Connector Testing Product information: The EV Plug Pull Force and Torque Tester is designed to test the mechanical strength of electric vehicle charging plugs, socket-outlets, and connectors. It verifies whether EV charging interfaces can withstand specified pulling force and torque requirements during connection and usage. This tester...

Brand Name:PEGO

Model Number:UL498

Place of Origin:China

UL498 Plug Socket Tester Stainless Steel Plug Socket Gauge with CNAS logo Calibration Certificate Figure number Description Figure 9.1 Articulate probe with web stop Figure 10.1 Probe Figure 31.1 Flat probe Figure 69.1 Reference probe Figure 94.1 Impoper ...

Place of Origin:China

Brand Name:KeRang

...ch occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range. A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The