Two Way Flow 1PC Ball Valve for General Applications
|
Highlight: 1PC ball valve Product introduction: The one-piece ball valve and the flanged gate valve belong to the same type of valve. The difference is that its closing part is a ball, which rotates around the centerline of the valve body to achieve ......
Shanghai Jianggong Valve Manufacturing Co., Ltd.
|
Stainless Steel 1/2"- 4" 3 Way T Type Internal Thread Manual Operated Mounting Pad Flanged Welding Ball Valves
|
...Way T Type Internal Thread Manual Operated Mounting Pad Flanged Welding Ball Valves Quick Details 3-way reduced port ball valve, side entry and discharge ports, 1,000/800psi, ISO5211 direct mount, 316SS body/ball/stem, RPTFE seats/seals, BSP ends, lever operated Sizes/WP- ¼” → 1-¼” (DN8 → DN32) – 1,000 psi (69 Bar) 1½”→ 2” (DN40→ DN50) – 800 psi (55 Bar) 5-8RL = “L”-port (primarily used for diverting flow- single flow...
TOBO STEEL GROUP CHINA
|
2 Inch SS 316 Three Way Stainless Steel Ball Valve
|
... valve for Brewing. The T-Port is allows flow in all 3 ports or it allows Flow in two ports only. Where as the L-Port allows flow in a 2 directions in a L formation and SS three way ball valve allows no flow at all . Making this a Specialized 1/2" SS three...
Cangzhou Cencho Tech Solution Co.,Ltd
|
2 Way On Off Ball Valve Flange end With Pneumatic Actuator
|
...Way On/Off Ball Valve with a Flange End and Pneumatic Actuator is an industrial device used for controlling the flow of fluids, such as gases, liquids, or slurries, through a pipeline. Here’s a detailed breakdown: 1. Ball Valve: 2-Way: Refers to the valve having two ports, an inlet, and an outlet, allowing fluid to flow in or out in one direction. On/Off Function: The valve can either allow flow ("On") or stop flow......
Veson Valve Ltd.
|
Full Welding Ball Valve with Gear Worm Actuator Stainless Steel Material
|
... B16.5 Option: Lockable handle Suitable medium: Water, oil, air and some corrosive liquid Temperature: -20~232°C A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the...
Kata Valve (Group) Co., Ltd.
|
Low Pressure 3 Way Electric Motor Ball Valve On Off / 3 Point Floating Type
|
... 1) Smooth flow, no block up. 2) High flow capability, 3 times flow rate more than traditional zone valves. 3) 220V/240V AC, 24V AC, 110V/120V AC also available. 4) Tight close, no leakage. 5) Optional manual lever for ......
Nanjing Saiko Controls Co.Ltd
|
Sanitary Three way non retention Ball Valve with Aluminium Pneumatic
|
...way non retention Ball Valve with Aluminium Pneumatic Detail: Manual Ball Valve, Pneumatica ball valve, C-top Pneumatica ball valve,Electrc ball valve, IL-Top type Ball vale, Proportinonal control Ball valve, T type/L type Connection: Clamped, Thread, Welding etc Certificate: PED, 97/23EC Specification Product Name: Sanitary Aluminum Pneumatic direct way ball valve, L type,PTFE Seat Valve......
DONJOY TECHNOLOGY CO., LTD
|
Gas Liquid Driven Full Bore Welded Ball Valve LF2 Forged Low Temperature Valve
|
... designed for low - temperature applications. The valve features a full - bore design, which means it has an unobstructed flow path, allowing for maximum flow capacity with minimal pressure drop. The welded construction provides excellent strength and...
Handan Shengnada New Material Technology Co., Ltd.
|
Gas-Liquid Driven Full-Bore Welded Ball Valve LF2 Forged Low Temperature Valve PN80 DN800 with 18 Months Warranty
|
... designed for low - temperature applications. The valve features a full - bore design, which means it has an unobstructed flow path, allowing for maximum flow capacity with minimal pressure drop. The welded construction provides excellent strength and...
Handan Shengnada New Material Technology Co., Ltd.
|
Diret Way Floating Sanitary Ball Valves Stainless Steel Manual Type
|
...Way Manual Floating Ball Valve Product Name: Direct Way Sanitary SUS304 SUS316L Tri Clamp Ball Valve With Stainless Steel Lever Handle Ball Valve Type: Direct way ball valve,butterfly type ball valve,3pc ball valve Size: 1/2”-6”,DN15-DN150 Connection End: Welding,clamped,threaded,Flange Standard: 3A,DIN,SMS,ISO/IDF,RJT Gasket: Silicone,EPDM,Viton,PTFE Operation Way......
Nyhau Fluid Equipment Co.,Ltd
|
Submit your “two way flow welded ball valve” inquiry in a minute :