DC-4000MHz 50 Ohm 7 16 DIN Male Connector RF Termination Load 10W Dummy Load for Needs
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-4000 VSWR ≤......
Anhui Bonfire Technology Co., Ltd
|
LOW PIM High Frequency 50 Watt Rf Termination Load 4.3 - 10 Conn Expanding Power Range
|
...expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer. DTS serial coaxial fixed attenuators'...
SHENZHEN ZD TECH CO., LTD
|
Alum N Male 450~2600MHz Rf Termination Load
|
... radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to...
HeFei Vinncom Science And Technology Co.,LTD
|
Female SMT Type IPX High Power RF Connectors RF Termination Load For WiFi Routers
|
Female SMT Type IPX High Power RF Connector rf termination load for WiFi Routers Product Details: Product name: DALEE RF Connector Secification: three generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC ......
Dalee Electronic Co., Ltd.
|
0.5 Watts DC - 40GHz RF Termination Load K2.92mm Male Chip Resistor
|
RF Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load...
Xi'an Elite Electronics Co., Ltd.
|
PIM 160DBC RF Termination Load / UHF Dummy Load 4.3 - 10 DIN Connector
|
100W high power RF Load with PIM 160dBc 4.3-10connector 1. 200w high power RF load , the PIM is 150-160dBc .With very good performance . 2. The VSWR is <1.2 3. Intermodulation is 150-160dBc@2X43dBm. 4. Frequency :0-3000G 5. Connector :4.3-10 male New ......
Lenolink Telecommunication Co.,Ltd
|
DC-6GHz 10W N Female Dummy Load / Termination Load Stable Performance
|
...10W N Female Dummy Load /Termination Load Better heating shrink Wide band ROHS Compliance RF Dummy Load model number VN-LD-6G-10W-OPm-R.Dummy load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present . the theory is matching similar impedance to real device that will be connected to the RF System. VN-LD-6G-10W......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
4 To 4.5GHz RF Drop In Isolator 20dB Isolation
|
4 to 4.5GHz RF Drop-in Isolator 20dB Isolation Frequency Range 4.0-4.5GHz Insertion Loss 0.5dB max Isolation 20dB min VSWR 1.25 max Forward Power 30W Reverse Power 10W Connector Tab Temperature Range -20ºC ~ +70ºC Coaxial & Drop-in Circulators Zysen ......
Beijing Silk Road Enterprise Management Services Co., Ltd.
|
40dB rejection 10W RF Microwave Filter 3 to 18GHz Microwave High Pass Filter
|
3-18GHz High Pass Filter Zysen offer Suspended Substrate Stripline Filter, low and flat insertion loss in pass band, high stop band attenuation and low VSWR. The Maximum power handling is 15W CW, from 1GHz to 40GHz, Connector SMA, N, 2.92mm are available. ......
Beijing Silk Road Enterprise Management Services Co., Ltd.
|
SMA male RF Termination
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF Termination Load......
Suzhou Terui Electronic Technology Co.,Ltd.
|
Submit your “rf termination load 10w” inquiry in a minute :