Home > Electrical Equipment & Supplies > Electrical Instruments > Resistance Meters >

Plc Hoses Flexing Resistance Tester

1-10 Results for

plc hoses flexing resistance tester

from 91 Products

PLC Current - Carrying Hoses Flexing Resistance Tester 10r / Min Flexing Speed

...Hoses Flexing Resistance Tester 10r/min Flexing Speed Foreword: In practice, some current carrying hoses need to adapt to various environments for continuous expansion and bending. The current carrying hose with poor quality is easy to break after being bent for a certain number of times. Therefore, before the hose leaves the factory, it is very important to test the bending resistance. This tester......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

Finished Shoe Folding Site Outsole Flexing Resistance Tester 30N 1/3 Length

....The flexing resistance of the specimen is determined by measuring the force required when a specimen is flexed to a specified angel or angle reached when a specimen is flexed by a given force. It uses a high-precise encoder to read out the angle value. It...

Haida Equipment Co., Ltd

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

1 Station 10r/Min Current-Carrying Hoses Flexing Resistance Test Equipment

...Hoses Flexing Resistance Test Equipment Product Overview: This current-carrying hoses flexing resistance test equipment meets the standard of IEC60335-2-2, clause 21.103 figure 102. Suitable for verifying the vacuum cleaners or water-suction cleaning appliances's current-carrying hoses shall be resistant to flexing. Test Procesures (Extracted from IEC 60335-2-2 clause 21.103): The end of the hose...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

EN12568 ISO20344 Safety Shoes Plate Flexing Resistance Tester 2 Stations

...center part of the insert with clamping plates,and use a pair of gripping bars to clamp the specimen at a distance of 70mm(toward the fore part) from the clamping plate,then flex it repeatedly. Standard: EN12568,ISO20344;2004 Technical Parameter Place of...

Dongguan Zhongli Instrument Technology Co., Ltd.

Address: No.62, Xinhe Management of Area, Wanjiang District, Dongguan city, Guangdong province ,China

High Accuracy Rubber Testing Machine , Electronic Leather Flexing Resistance Tester

... of leather, lining, fabric and similar material. Equipment summary: Electronic leather Flexing resistance testing equipment used to test the folding nature for various leathers and fabrics. Materials need be nipped both inside and outside, twist and...

Guangdong Haida Equipment Co., Ltd.

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

Six Twelve Station Flex Resistance Tester AC220V For Leather

...Counter LCD digital 2. Description This machine is designed for determining the resistance of materials such as leather, fabric to flex.The flexing resistance is determined after the specimen is flexed for a specified time. It has a memory function and can...

Dongguan Gaoxin Testing Equipment Co., Ltd.，

Address: No.7, Shengfeng Road 523039, Xinhe Industrial Park, Wanjiang, Dongguan, Guangdong, China

ISO 4643 5423 Shoe Bending Testing Machine SATRA TM92 Shoe Soles Flex Resistance Tester

... (pieces). The samples are mounted on the testing machine and flexed at a certain angle and frequency. The crack (opening) and adhesive separation length of the sole and welt after a certain number of flexes are measured, and the changes in the upper are...

DONGGUAN LONROY EQUIPMENT CO LTD

Address: A31, 11 Floor, No 1 Building, Minjian Jinrong Building, No 111 Guantai Road, Sanyuanli Community, Nancheng Street, Dongguan, Guangdong, China

SATRA TM161 Footwear En Shoe Sole Bending Flexing Resistance Tester

... some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length....

Gester International Co., Ltd

Address: No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.

IEC 30r/Min Current Carrying Hose Abrasion Resistance Tester

...Hoses Abrasion Resistance Tester With 30r/min Crank speed Standard: IEC60335-2-2 ‘Household And Similar Electrical Appliances - Safety - Part 2-2: Particular Requirements For Vacuum Cleaners And Water-Suction Cleaning Appliances’ clause 21.102 figure 101. Application: Suitable for the Current-carrying hoses abrasion resistance tester. Test sample: Vacuum cleaner hoses......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

LIYI R800mm Waterproof Test Machine PLC Controller Water Resistance Tester

...PLC Controller Water Resistance Tester General application fields: R800mm IEC60529 IPX3-4 Test Waterproof Test Chamber for Big Samples with PLC Controller is used for outdoor lamps, household appliances, automotive accessories and other electronic and electrical products. Function of the equipment: The main function of the R800mm IEC60529 IPX3-4 Test Waterproof Test Chamber for Big Samples with PLC......

Dongguan Liyi Environmental Technology Co., Ltd.

Address: No.2, Zhifu Road, Mowu, Wanjiang District, Dongguan, Guangdong, China

Submit your “plc hoses flexing resistance tester” inquiry in a minute :

*From:	Your email address is incorrect!
To:	Dongguan Liyi Environmental Technology Co., Ltd. Products: LIYI R800mm Waterproof Test Machine PLC Controller Water Resistance Tester
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “plc hoses flexing resistance tester” inquiry

*From:
Your email address is incorrect!
To: Guangzhou HongCe Equipment Co., Ltd.
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0