Electronic Control Impact Testing Apparatus , IEC 60950-1 Ball Drop Test Equipment
|
...Impact Testing Machine With Electronic Control Parameters: Test object Equipment enclosures Reference standard IEC 60950, IEC 60065, IEC 60598 Test Impact test - drop and swing Drop height 500-1500mm Impact steel ball 500g Release mode electronic control Swing impact available Power supply 220V 50Hz Description: This device is suitable for drop impact test......
Guangzhou Shice Equipment Co., Ltd.
|
ISO11925-2 Building Materials Testing Equipment PLC Control Flammability Test Apparatus UP-5020
|
... with a small flame in a normal combustion environment to determine the flammability of building products. The flammability test furnace for building materials uses the German Kleinbrenner (Kleinbrenner) principle to measure the combustion performance of...
Dongguan Youbi Test Equipment Co.,Ltd
|
PLC Control Torsion Test Apparatus With Touch Screen Stepping Motor Sensor Ohmmeter
|
...Conduction test,Life test 4. Resistance range: 0—9.999Ω 5. Up -down stroke : 100mm 6. Maximum product: 230x160mm 7. External Dimension: 500 x 450 x 700 mm 8. Maximum torque: 5Nm 9. Control mode: Touch screen + PLC + Stepping motor+ sensor + ohmmeter 10....
Shenzhen Mingyu Instrument And Equipment Co., Ltd.
|
ASTM F1838-19 Compliant PLC Control Impact Testing Machine with Customizable Drop Weight for Seat Durability Testing
|
Equipment Description Test rig for chair drop durability is used to evaluate the ability of the chair to withstand heavy and abusive impact forces on the seat. It can also to evaluate the ability of chairs to withstand fatigue stresses and wear caused by ......
SKYLINE INSTRUMENTS CO.,LTD
|
PLC Control Flammability Test Apparatus For Fabric Building Materials
|
Great Quality Flammability Test for fabric Building Materials First, the scope of application: The building material smoke density tester is developed according to the technical conditions stipulated in the national standard GB/T8627-2007 "Test method......
Shanghai Glomro Industrial Co., Ltd.
|
IEC 62208 Pendulum Impact Test Apparatus For Mechanical Impact Test With PLC Control
|
...Impact Test Apparatus For Mechanical Impact Test with PLC Control Product Overview: The Pendulum Impact Test Apparatus is designed and manufactured in full compliance with the following international and national standards: GB/T 20138-2023, impact element requirements (referencing GB/T 2423.55-2023); GB 7251.5-2017, Low-voltage switchgear and controlgear assemblies, Clauses 10.2.101.3 (Impact Load Test), 10.2.101.5 (Impact...
Sinuo Testing Equipment Co. , Limited
|
Enamels Impact Test Apparatus (Pistol Test) ISO4532
|
... figure 1 for determining the resistance of enamelled articles to impact (Pistol test). The test apparatus consists of a striking bolt with a 5mm steel ball tip, spring load, trigger and a tripod. This device is a completely mechanical instrument with a...
Pego Electronics (Yi Chun) Company Limited
|
impact test apparatus,charpy impact test equipment,charpy impact testing machine
|
... is used for measuring the metal material resistance performance under dynamic load,in order to determine the material properties under dynamic load. It’s a necessary testing machine,not only used in the metallurgy,machine manufacture etc areas, but...
jinan hardness STING EQUIPMENT CO., LTD
|
ISO180 2000 Izod Pendulum Impact Test Apparatus For Plastic
|
...Impact Test Apparatus For Plastic Application:The liquid crystal digital display cantilever impact tester is an instrument for detecting the impact resistance of non-metallic materials such as rigid plastics, nylon, hard rubber and electrical insulating materials under dynamic load. It is essential for non-metallic materials manufacturers and quality inspection departments. Testing instruments are also indispensable test...
Guangdong Aisry Instrument Technology Co., Ltd.
|
Adhesive Force Impact Testing Machine , Hammer Test Device Impact Test Apparatus
|
...Impact Testing Machine , Hammer Test Device Impact Test Apparatus Product details: This test device confirms to the standard of YDT757 drop hammer test way. It’s suitable for the adhesive force test of hot dip galvanizing coatings. During the test, the free dropping hammer is used to hit the zinc coating to test......
Guangzhou HongCe Equipment Co., Ltd.
|
Submit your “plc control impact test apparatus” inquiry in a minute :