YDT757 Galvanized Coating Adhesion Hammer Test Device With Oak Handle
|
... Adhesion Hammer Drop Test Device Product Overview: This test device conforms to the YDT757 drop hammer test method, and is suitable for hot-dip galvanized coating adhesion test. It uses a hammer to drop freely to hit the sample to test whether the ......
Sinuo Testing Equipment Co. , Limited
|
YDT757 Hammer Test Device Impact Height 300mm Hammer Blade Width 20mm
|
...the hammer base. The test piece shall be placed horizontally, the hammer head shall face the center of the bench, the hammer handle shall fall freely after being perpendicular to the plane of the base, strike 5 points in parallel at an interval of 4mm, and...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60068 IK Vertical Drop Hammer Testing Device Vertical Falling Weight Test Machine Small Meter
|
...) standard for impact resistance testing of household appliances, electronic and electrical products, and their accessories. The hammer consists of a basic impact element with selectable drop heights from the standard table. The impact element conforms to...
DONGGUAN LONROY EQUIPMENT CO LTD
|
EN62262 IK07 Spring Impact Hammer Test Device of 2 Joules
|
1. Introduction: (1) Spring Impact Hammer Test Device is strictly designed according to IEC60068-2-75 standard. (2) After applying the impact with the hammer, the products is examined with accessibility probes to determine access to chock,energy,and injury......
HK LEE HING INDUSTRY CO., LIMITED
|
Drop Hammer Test Equipment Featuring Adjustable Drop Height and Impact Energy for Versatile Material Testing Applications
|
...contour is released from a preset height to strike test pieces at designated positions. Operators can flexibly adjust impact intensity by modifying the impactor weight or varying the drop height. This testing device offers broad application coverage and...
Beijing Jinshengxin Testing Machine Co., Ltd.
|
Handle Pull Resistance Cookware Corrosion Testing Device Standard CEN/TS 12983-2
|
Handle Pull Resistance Tester Cookware Corrosion Testing Machine APPLICATIONS& TEST PURPOSE: The machine is used to perform pull strength of handle under specify height and impact weight. DESIGN STANDARD: CEN/TS 12983-2 STANDARD FEATURES: Steel impact hammer, having a mass of 1 kg ± 50 g. Metal guide for dropping the hammer......
Guangdong Haida Equipment Co., Ltd.
|
Multi Energy SS Spring Impact Hammer Test Apparatus
|
... hammer. Application: This spring hammer is available to test the impact resistance of the electronic and electrical products, as an indispensable test device for the safety performance detection of the electrical products. It is suitable for testing the...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60068-2-75 Appendix B Single Weight Spring Hammer Calibrator / Spring Hammer Calibration Device
|
IEC60068-2-75 / GB2423.55 Standard Spring Hammer Calibration Device for Spring Hammer Calibration Product Description: Spring impact hammer calibrator is based on all parts IEC60068-2-75 Appendix B requirements of normative documents tolerance ......
KingPo Technology Development Limited
|
Impact Strength Testing Device For Toys Surface Impact Testing With BS EN 71
|
...Testing Device For Toys Surface Impact Testing With BS EN 71 Test Purpose: Reduce the material damage or the danger of imitation toys protection devices as the real face. Application range: Range: imitation protect device (clear material protector, headpiece ,cap, blinker) Comply with Standards: EN 71-1 8.7 impact test Techincal Parameter Performance: Adjust height: 0-200mm Impact Hammer Diameter 80.00mm Impact Hammer......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Spring Hammer Calibration Device Calibration As Per IEC 60068-2-75 Annex B.3 And Figure B.5
|
Spring Hammer Calibration Device Calibrator as per IEC60068-2-75 Annex B.3 and figure B.5 1. Introduction The spring hammer calibration device calibrator is designed according to IEC60068-2-75 Annex B.3 and figure B.5 for checking the impact energy ......
Pego Electronics (Yi Chun) Company Limited
|