Home > Beauty & Personal Care > Beauty Equipment > Beauty Salon Equipment >

Needle Holder Retraction Force Tester

1-10 Results for

needle holder retraction force tester

from 30 Products

Self Destructive Syringe Needle Holder Retraction Force Tester

Self destructive syringe needle holder retraction force tester Product introduction: It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test load, print, test, uplink, downlink, time, calibration......

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

15N 30N LED Light Testing Equipment Holder Axial Force Tester

...Holder Axial Force Tester IEC 60598-1 clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders......

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

IEC60598-1 Clause 4.4.4 Fluorescent Lamp Holder Axial Force Tester / Lighting And Luminaries Test Equipment

...Holder Axial Force Tester / Lighting and Luminaries Test Equipment Product information: The test equipment is designed and manufactured according to IEC60598-1 clause 4.4.4 standard test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder...

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Fluorescent Lamp Holder Axial Force Tester Luminaries Test Equipment IEC60598-1

...content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutes, then quit, deformation detection lamp holder shall not exceed the amount of light foot length of 1 / 4. It...

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC 60598-1 Fluorescent Lamp Holder Axial Force Tester Luminaries Test Equipment

... test item requirements, test content: axial pressure is applied to the G5 lamp holder of 15N, 30N axial pressure exerted on the G13 lamp holders, pressure holding time I minutesthen quit, deformation detection lamp holder shall not exceed the amount of...

Sinuo Testing Equipment Co. , Limited

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

USB Data Storage Medical Needle Penetration Force Tester 100mm/min Moving Speed

... 0.001N Moving speed 100mm/min Power off storage Available Power supply AC220/50Hz(Can be customized) Sensor High precision force sensor (with software and hardware protection functions)...

Guangdong Haida Equipment Co., Ltd.

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

Medical Needle Penetration Force Tester with 100mm/min Moving Speed

... 0.001N Moving speed 100mm/min Power off storage Available Power supply AC220/50Hz(Can be customized) Sensor High precision force sensor (with software and hardware protection functions)...

Guangdong Haida Equipment Co., Ltd.

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

0N - 2N Medical Needle Tubing Tester , Medical Needle Penetration Force Tester

...Needle Tubing Tester , Medical Needle Penetration Force Tester Safety Testing Medical Equipment and Technology for medical device manufacturers and governmental quality department Specification: The tester adopts a 5.7-inch color touch screen to show menus: nomial outside diameter of needle, type of tubing wall, test , test times, upstream, downstream, time and standardization. it displays maximum penetration force......

NINGBO WELLMEDLAB CO., LTD.

Address: 10# 3Floor Yinyi Times Squares 8# Lengjing Street Haishu District Ningbo China 315010

8040-HD Medical Needle Tip Strength and Piercing Force Tester

...Needle Tip Strength and Piercing Force Tester Product Features Medical Needle Tip Strength and Piercing Force Tester is used to test the puncture force performance of the syringe tip, evaluate whether the sharpness of the syringe meets the standard requirements, and is also known as the Syringe puncture force tester......

Haida Equipment Co., Ltd

Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China

ASTM F963 Stainless Steel Self Retracting Ropes Tester 50x50x175cm Dimension

...-Retracting Ropes Tester Applications Used to test the force of self-retraction mechanisms for self-retracting cords toys. Using a suitable clamp, position the toy so that the cord is vertical and the toy is in the most favourable position for retraction. ......

SKYLINE INSTRUMENTS CO.,LTD

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

Submit your “needle holder retraction force tester” inquiry in a minute :

*From:	Your email address is incorrect!
To:	SKYLINE INSTRUMENTS CO.,LTD Products: ASTM F963 Stainless Steel Self Retracting Ropes Tester 50x50x175cm Dimension
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “needle holder retraction force tester” inquiry

*From:
Your email address is incorrect!
To: shanghai kerang technology co ltd
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0