2kW Non Metallic Materials Testing Instruments UTM Large Size Touch Control
|
...-metallic materials or products, such as tension, compression, bending, shearing, tearing, breaking, peeling, pressure resistance, and puncture. Techinical Parameter: Model HB-B04-L1 Control mode Touch screen control Maximum test force (N) 2KN, 5KN, 10KN,...
Guangdong Hengbang Testing Equipment Co.,Ltd.
|
Microcomputer Universal Material Testing Machine Single Column With Stroke 1200mm
|
...Testing Machine with Stroke 1200mm Brief Introduction: For mechanical properties testing of non-metallic materials such as rubber, plastics, wires and cables, textiles, waterproof materials, and non-woven fabrics, and wire, metal foils, sheet metal, and metal rods. Fixtures are also suitable for a variety of finished products stretching, compression, peeling, shearing, tearing test......
Dongguan Quality Control Technology Co., Ltd.
|
Metal Material Cyclic Holding Test Computer Control Universal Tensile Testing Machine
|
Metal Material Cyclic Holding Test Computer Control Universal Tensile Testing Machine Model:IF2A1-300KN Purpose: This machine is suitable for adhesive tape, rubber, plastic, sponge, waterproof materials, electric wire & cable, textile, net rope, non-woven fabrics etc, nonmetal materials and metallic thread, metal foil, steel plate and metal rod to do tensile, compression, bending, peeling, cutting, tearing shearing tests......
Infinity Machine International Inc.
|
2kN Universal Material Tensile Testing Machine For Metal & Non-Metallic Materials
|
..., fully meets the test requirements of IEC 62196-1:2022 Clause 9, 13.3.2, 16.9, 26.7.3, Table 4 and BS 1363-2 Clause 11.10.7, 13.11.4. It is widely used for mechanical property tests of non-metallic materials (rubber, plastic, wire and cable, textile,...
Sinuo Testing Equipment Co. , Limited
|
Digital Charpy Izod Impact Testing Equipment For Non Metal Material
|
...Testing Equipment For Non Metal Material Introduction: The Digital Combined Charpy Izod Impact Test For Non Metal Material is mainly used to measure the impact toughness of rigid plastic, reinforced nylon, fiberglass, ceramics, cast stone, insulation materials and other non-metallic materials. It is the ideal testing equipment in the chemical industry, scientific research institutes, universities and quality testing...
Dongguan Liyi Environmental Technology Co., Ltd.
|
60T Metal Tensile Test Hydraulic Tensile Testing Machine with PC Control
|
... Metal Tensile Testing Machine is also named the tensile machine, which is suitable for tensile, compression, bending and shear tests of various metallic and non-metallic materials, which can also be used for similar tests of concretes, cements and other...
Guangdong Haida Equipment Co., Ltd.
|
Long Travel UTM Electronic Tensile Strength Testing Machine for Metal Material
|
...Testing Machine for Metal Material Tensile Testing Machine Standards Sharing.pdf APPLICATIONS: Tested sample: plastic films, laminated materials, adhesive tapes, adhesive bandage (plaster), release paper, plastic films, leather, rubber & plastic, paper, fiber, etc. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. Deformation under defined load: Test...
Guangdong Haida Equipment Co., Ltd.
|
Molten Metal Splash Resistant Material Test Machine ISO 9185 Certificated
|
...Metal Splash Resistance Materials Test Machine Introduction: Evaluate the material's resistance to liquid metal splash. During the test, an appropriate amount of molten metal is sputtered onto the sample placed at an angle. Attach a PVC film to the back of the sample to contact it. The damage is evaluated by recording the change of the PVC film after the sputtering process. According to the test results, repeat the test......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC60884-1 / IEC60950 Ball Pressure Test Apparatus Testing Non - Metallic Materials
|
...Test Apparatus Test Non-metallic Materials Product details: The HT Ball Pressure Tester conforms to many standard requirements like IEC60884-1, IEC60950 and so on. It is used for testing the heat resistance of the electrical enclosure and external parts which are made up with the insulating materials......
Guangzhou HongCe Equipment Co., Ltd.
|
Microcomputer Controlled Metal Impact Testing Machine ( 150J / 300J)
|
...Metal Impact Testing Machine (150J / 300J) Product Overview This microcomputer controlled metal impact testing machine measures the resistance of metal materials under dynamic load impact conditions. It serves as an essential testing instrument for metallurgical and mechanical manufacturing units, as well as research facilities conducting new material development. This advanced testing......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Submit your “metal material test” inquiry in a minute :