Lab Testing 3.8ghz Amplifier Dummy Load For IBS DAS
|
...Dummy Load Termination N Male 0-3.8GHz 0-4GHz Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load...
HeFei Vinncom Science And Technology Co.,LTD
|
10 Watts 4GHz Amplifier Dummy Load Wide Frequency Range
|
10 Watts 3.8GHz 4GHz 4.3-10 Male RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-10W-OPm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
DC-3Ghz 5W 7/16 Din Male Connector Coaxial RF Dummy Load with 50 ohm
|
...Dummy Load with 50 ohm 1. The function of termination/dummy load? a. to test a radio transmitter ,it acts as a protector to be a substitute of antenna. 50ohm dummy load provides proper resitance at final RF amplifier stage b. to prevent away from other radios interference when ajusting and testing the transmmiter c. to be a replacement of the loudspeaker during audio amplifier testing......
SHENZHEN ZD TECH CO., LTD
|
ASTM F2088 Lab Testing Equipment CAMI Infant Dummy Child Dummy Mark I / Mark II
|
Lab Testing Equipment CAMI Infant Dummy Child Dummy -Mark I, Mark II Product introduction This dummy is based upon a leather skeleton, which has approximately the external shape of the dummy when viewed frontally. Cast lead or aluminum blocks are attached......
SKYLINE INSTRUMENTS CO.,LTD
|
ASTM F1291 1720 Warm Body Sweating Dummy Tester Human Body Heat Exchange Simulation Test Machine Lab Test Machine
|
... Test Machine Introduction The warm body sweating dummy tester can simulate the heat exchange processes of conduction, convection, radiation between the human body, clothing and the environment, as well as the moisture exchange process of ......
DONGGUAN LONROY EQUIPMENT CO LTD
|
2000 KW Dummy Load Bank With Copper Bar For UPS Generator Testing
|
2000 KW Dummy Load Bank with copper bar for UPS generator testing Introduction Dummy load bank main used to test the capability and aging degree for high-power ups on-line, inverter, switch power and diesel generator set for electric power, telecom ......
Hebei Kaixiang Electrical Technology Co., Ltd
|
Seat Belt Test Rubber Dummy Used For Overall Dynamic Impact And Static Load Test
|
...information: ●The outer surface is made of 40mm thick pure rubber ●Internal use of other materials ●The unique design of the dummy, by adjusting the position of the center of gravity, avoids the dummy from shifting due to the problem of the center of...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
200KW Generator Testing Dummy Load Bank
|
...Testing Dummy Load Bank offers the most robust, high-capacity designs in the industry. Generator Testing Dummy Load Bank is setting the standard with intelligent operator controls, safety indication layouts, adjustable load step resolution, and lightweight designs. Generator Testing Dummy Load......
Hebei Kaixiang Electrical Technology Co., Ltd
|
5HP Frequency Motor Lab Test Machines IP Test Equipment Bycicle 100LB Carrying Load Performance
|
...Lab Test Machines IP Test Equipment Bycicle 100LB Carrying Load Performance 1.Product Description PC Control 5hp Frequency Motor Lab Test Machines Ip Bycicle 100Lb Carrying Load Performance Test Machine is suitable for test bike into the van and the brake performance test, design and manufacture conforms to specification testing......
Guangdong Haida Equipment Co., Ltd.
|
1mm/Min Cbr Test Machine With Load Ring Soil , Electronic Lab Cbr Tester
|
...Test Machine with Load Ring Soil Lab Cbr Tester Details of CBR Test machine: CBR Test Machine with Load Ring CBR Test Apparatus is suitable for test of soils and mix materials (the grain size of the soil is less than 40mm) compacted with CBR mold so as to confirm the bearing loading......
Guangdong ALI Testing Equipment Co,.Ltd
|