ROHS IP65 Rma RF Dummy Load Antenna For Microwave
|
10 Watts 3.8GHz 4GHz N Female RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the ......
HeFei Vinncom Science And Technology Co.,LTD
|
ROHS IP65 Rma RF Dummy Load Antenna For Microwave
|
|
... Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-10W-ONf Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
50W module led power supply IP65 Constant current driver
|
...IP65 Constant current driver Quick Detail: Applications: It is used in the street light ,high way led lamp,tunnel lamp ,square lamp,road lamp, city lighting, parking spot lamp, track lighting fixtures ,scenery area ,retail lighting and other applications where high luminous flux is desired. Specifications: Product Name 50W module led power supply HLG-60H-36A IP65 Constant current......
Sunshine Opto-electronics Enterprise Co.,ltd
|
22w LED Driver IP65 Constant Current Type 88% Efficiency 3 Years Warranty
|
3 years warranty 22w led driver Features: 1. International input voltage(up to 305VAC 2. With functions of active PFC 3. Efficiency reach to 89% 4. Protection design:short-circuit,over-voltage,over-current,over-temp. 5. IP67/IP65 design,for indoor and ......
Shenzhen Zhongfu Optoelectronics Technology Co., Ltd.
|
High Brightness Led Outdoor Advertising Screens P10 IP65 Constant Current Drive
|
2019 High Quality PH10 Outdoor Led Display Screen d Specifications Item Parameters Modules Model PH10 Pixel Pitch(mm) 10 Physical Density(dot/m2) 10000 LED Configuration 1RGB LED Type SMD3535 Module Size(mm×mm) 320x160 Module Resolution(PX×PX) 32x16 Module......
Shenzhen TOPLED Optotech Co., Ltd.
|
DC-3.8GHz 30W N Female Connector GSM Dummy Load RF Dummy Load Termination Load
|
...Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt max.) 30 Operating Temperature( ℃ ) -40 ~ + 80 Body Material Aluminum Connector Material Brass(......
SHENZHEN ZD TECH CO., LTD
|
2000 KW Dummy Load Bank With Copper Bar For UPS Generator Testing
|
...Dummy Load Bank with copper bar for UPS generator testing Introduction Dummy load bank main used to test the capability and aging degree for high-power ups on-line, inverter, switch power and diesel generator set for electric power, telecom department and manufacturer. It can ensure the reliability of constant......
Hebei Kaixiang Electrical Technology Co., Ltd
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
48V 200A battery test dummy load bank
|
...dummy load bank (namely battery discharger, battery load bank, battery discharge tester), is designed for the capacity test and maintenance of continuous battery sets through intensive discharging. The unit features in its LED display, timing function and automatic low voltage protection; Automatic constant current......
Hebei Kaixiang Electrical Technology Co., Ltd
|
60-130V LED Constant Current Driver , Waterproof Constant Current Led Power Supply
|
Constant Current LED Driver CE Rohs 36w DC60-130v Waterproof Power Supply Constant Current LED Driver Product Features * Constant current output * Compact dimension design * CE, IP67 certifide, ROHS compliant * Ta:-30℃ ~ +60℃ * Protections: short circuit,over load,over voltage * 100% full load burn-in test Constant Current LED Driver Product Specification Item No. CHO-320-130A2 Output Current......
Zhuhai Hengqin DISTRICT Huawei New ENERGY Co., Ltd.
|