10 Freq/Min 220V 50Hz IEC Integrated Test Device for Circular saws
|
IEC Test Equipment Integrated Test Device For Circular Saw Switch And Lower Guard Standard: IEC60745-2-5 ‘Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws’.2003 Annex BB.20.102. EN 60745-2-5: 2010 clause 17.101 and clause 19.102.3. EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301. Application: It is used to test......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 62217 Multi-factor Ageing Test Device For Insulators
|
Product descriptions from the supplier simulate the comprehensive performance test of insulators under complex working conditions Scope of application: The equipment is mainly used to simulate the comprehensive performance test of insulators under complex ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 62368-1 Annex T.6 Figure T.1 Steel Ball Horizontal And Vertical Impact Test Device
|
...-1: 2013 Clause 4.2.5, IEC 60065:2014 clause 12.1.4 fig.8, 12.7.3.5, IEC 60598-1 Clause 4.13.4a, etc. Application: This device is suitable for drop impact test for equipment enclosure. Test sample: Luminaries, Audio, video and similar electronic apparatus,...
Sinuo Testing Equipment Co. , Limited
|
IEC 60745-2-5 Circular Saw Lower Guard Test Device 0-30 Times / Min
|
... 62841-2-5 clause 17.101 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test sample: Circular saws IEC Test Equipment Feature: The saw is to be set for a 90°cut and oriented in the...
Guangzhou HongCe Equipment Co., Ltd.
|
EN IEC 61851-1 Electric Vehicle Charging Interface Pendulum Impact Test Device
|
...IEC 61851-1 Electric Vehicle Charging Interface Pendulum Impact Test Device Complied Standards & Clauses for Electric Vehicle Charging Interface Pendulum Impact Test Device This Electric Vehicle Charging Interface Pendulum Impact Test Device complied to EN IEC 61851-1-2019, IEC 61851-1-2017,12.11, IEC60068-2-75:1997 and IEC62262:2002. Technical Parameters for Electric Vehicle Charging Interface Pendulum Impact Test Device......
Sinuo Testing Equipment Co. , Limited
|
HAOMAI Multimode IEC 61850 Testing , 8.82 Lb Protection Relay Test Equipment
|
IEC 61850 Test System Model: RELAYSTAR-6000D The RELAYSTAR-6000D is new generation test set dedicated to IEC 61850-based protection devices and Merging Unit. It can simulate various types of messages which conforms to IEC 61850-9-1/9-2/9-2LE, GOOSE, IEC 60044-7/8 FT3. IEC 61850 Test System RELAYSTAR-6000D can either be operated by embedded industrial PC with 9.7-inch touch screen or by test......
HAOMAI ELECTRIC TEST EQUIPMENT CO.,LTD
|
800N Test Device As Per IEC 60601-1 Clause.9.4.2.3b / IEC 62368-1:2018 Clause 8.6.2.3
|
800N Test Device as per IEC 60601-1 clause.9.4.2.3b / IEC 62368-1:2018 clause 8.6.2.3 Technical Parameters: Standards IEC 60601-1,IEC 62368-1 Clause IEC 60601-1-clause.9.4.2.3b . IEC 62368-1:2018 clause 8.6.2.3. Weight load 800N Height Maximum lifting ......
KingPo Technology Development Limited
|
IEC 60811-1 VDE 0472 Low Temperature Winding Test Device
|
IEC 60811-1 VDE 0472 Low Temperature Winding Test Device This precision test apparatus is engineered in compliance with domestic and international safety standards including GB/T 2951.4, IEC 60811-1-4, and VDE 0472. It evaluates whether insulated wires develop cracks when subjected to low-temperature coiling conditions. Testing must be performed in conjunction with a compatible low-temperature test......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Ball Pressure Test Device with NM300-6 , IEC60695-10-2 , IEC 60884-1 , IEC60320-1
|
...Test Device with NM300-6, IEC60695-10-2, IEC 60884-1, IEC60320-1 standards Specificaitons: 1.0 Comply with the standards of NM300-6, IEC60695-10-2(2003), IEC 60884-1, IEC60320-1, IEC60335-1, IEC60598-1, IEC60950-1.;GB4943,GB2099. 2.0 Ball diameter: 5mm±0.05mm(Radius 2.5mm) 3.0 Ball pressure: 20N(including loading device and ball) 4.0 Test......
Dongguan Hust Tony Instruments Co.,Ltd.
|
IEC 60884 6 Stations Temperature Rising Test Device
|
.... It is applicable to the temperature rising of electronic accessories in working position. Technical parameters: Item TR-1 TR-2 TR-3 Working station 6 6 6 Testing current 0-40A 0...
Guangzhou Shice Equipment Co., Ltd.
|
