Hihg Performance Water Based Release Agent For Belts
|
...Water Based Elevator Handrail Mold Release Agent Lubricant It is a milky water based release agent, which can be widely used in traditional drive belt, cutting belt, cutting belt, etc. It can be used with high dilution, the surface of the tape products is dry, wireless marks, no missing materials, and high cost performance, which can effectively meet the needs of customers for high-performance......
Shanghai Lorechem Company Limited
|
Shoe Sole Milky Liquid Water Based Release Agent
|
... Chemical Composition: The water based release agent for shoe Sole is made by special silicone oil, wax liquid and surfactant by special process. 2. Properties Item Index Appearance Milky ......
Qingdao Exceed Fine Chemicals Co.,Ltd
|
Excellent Dispersion Performance Water Based Dispersing Agent BYK-190 For Printing Ink
|
...Performance Water Based Dispersing Agent BYK-190 For Printing Ink Dispersing agent DR-190 is light yellow transparent liquid,is a widely used dispersant for dispersing various pigments. Specification Item Value Appearance Light yellow transparent liquid Active content 90% (10% water) Viscosity(25℃) 300-800cs Flash point > 100℃ Density,20°c g/ml 1.06 Acid,mg KOH/g 10 Performance: This agent......
ANHUI DERUN IMPORT & EXPORT TRADING CO., LTD
|
Blue Water Base Blowing Agent Polyurethane Spray Foam Blend Polyols for Energy Saving
|
Water based Flexible PU foam is an environmental protection type using water as blowing agent, with good performances of low density ( 8~10kg/m3 ), open cell, flame retardant( B3 grade) etc. During spray process in site, the breathing small open cell filled with air, without producing toxic gas to destroy the Ozone layer( traditional blowing agent......
Vida New Material Technology Co., Ltd.
|
White Liquid Mould Release Agent Water Based For Upper Mould
|
...Release agent PU-5074 Mould release agent water base for the shoe sole for the upper mould Characteristic: PU-5074 is a emulsion formed by mixing siloxane and silicone resin. Mainly used for polyurethane soles, self-crust, hard foam and other products, dry surface, light Natural, good alcohol solubility Physical property: Item Data Appearance White liquid Solid content 28% Density About 1.0 PH 7.0-8.0 Emulsifying agents nonionic Diluent Water...
JOYWAY INDUSTRIAL COMPANY LIMITED
|
Water Resistance Anti Sticking Wax Dispersion For Water Based Ink And OPV
|
Water Resistane And Anti-Sticking Wax Dispersion For Water-Based Ink And OPV WQ-W40 Wax Dispersion Introduction WQ-W40 is a synthetic wax dispersion emulsion with 40% solid content. It is recommended to be used in water-based coatings to improve the slipperiness, anti-sticking and water resistance of products. It can be used as a lubricant and softener for yarns in the textile industry; water-resistant agent and mold release agent......
Xiamen WangQin Chemical Technology Co., Ltd.
|
Water-based Semi-permanent Mold Release Agent for Tire Rubber Products Improves Mold Flow and Reduces Adhesion
|
...Release Agent Technical Introduction This is a water-based, semi-permanent mold release agent containing a specially structured polysiloxane. It quickly forms a uniform and dense thin film on the mold surface, reducing adhesion between the rubber compound and the mold, improving the appearance quality of the product, and reducing the frequency of mold cleaning. Application Areas: This mold release agent......
Qingdao fineking New Materials Co., Ltd.
|
High Temperature Solid Material Water Soluble Release Film For Rubber Mould Release
|
... system used to make composites parts but is soluble in water. It is particularly recommended as a parting agent for separation between polyester or epoxy resins and various mold surfaces but may be used with most thermoset resins. PVA release film is not...
Changzhou Greencradleland Macromolecule Materials Co., Ltd.
|
Silicone Coating Wetting Agent D-348 For Water Based Formulation
|
Water-Based Formulation Silicone Coating Wetting Agent D-348 (Analogue to Tego 270,BYK-348,TEGO-349) First, summary D-348 base material wetting agent is a kind of silicone coating wetting agent with excellent performance. It is widely used in water-based system, radiation curing system, solvent-based......
Guangdong DAHUA New Material Co.,Ltd
|
Water Based Acrylic Paint with High Water Resistance and Good Resistance To Cracking And Peeling for Wooden Products and SPF Veneered Boards
|
Water Based Acrylic Paint for Wooden Products & SPF Veneered Boards Product Overview Our high-quality Water Based Acrylic Paint is designed for both professional painters and DIY enthusiasts. This chemical auxiliary agent offers exceptional performance with an eco-friendly profile, ensuring easy application, quick drying times, and minimal environmental impact compared to traditional solvent-based paints. Key Features Product Name: Water Based...
Foshan Wayen New Material Technology Co., Ltd.
|
Submit your “hihg performance water based release agent” inquiry in a minute :