SMA Female RF 50 Watt Dummy Load Terminator 26GHz 50 Ohm
|
...SMA Female Dummy Load 26GHz Terminator Better heating shrink Wide band Good water resistance Part Number VN-DL-26G-50W-OSF Operating Frequency DC-26 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
DC6GHz VSWR 1.25 50 Ohm 50 Watt Dummy Load 80×60×60mm
|
Coaxial Fixed Terminations Series 50Ω 50w Connector N DC-6 Max VSWR1.25 80×60×60mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport ......
Shenzhen Yulongtong Electron Co., Ltd.
|
N Male Cu RF Load Termination 2.92mm 50 Watt Dummy Load
|
50W DC-18GHz N connector Coaxial Termination DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.92mm or chip, ......
Chengdu Zysen Technology Co., Ltd.
|
DIN Female Connector DC-3.8GHz 100 Watt Dummy Load
|
...Watts DIN Female DC-3.8GHz DC-4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load......
HeFei Vinncom Science And Technology Co.,LTD
|
100 Watt Dummy Load Coaxial Cable Connectors 1-4 Generation With Gold Flash
|
...watt dummy load with gold flash Product Details: Product name: DALEE RF Connector Secification: 1-4 generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC Operating Temprature: -40℃ - +85 ℃ Nominal Characteristic Impedance: 50......
Dalee Electronic Co., Ltd.
|
50 Ohm BNC Female RF Termination L-com LCTR6254C 2 Watt Dummy Load for Signal Energy Absorption
|
Product Overview L-com's LCTR6254C is a 2 Watt, 50 Ohm BNC female RF termination designed for use from DC to 4 GHz. Also known as an RF load or dummy load, this component is essential for absorbing signal energy from unused ports in RF, microwave, and ......
Shenzhen ECER Network Technology Co., Ltd.
|
N Male 50 Ohm Dummy Load Antenna / Custom DIN Digital Dummy Load
|
... are built-in and shipped worldwide RF cable assemblies in 50 ohms can be ordered using the following connector types such as 7/16 DIN, BNC, FME, MCX, MMCX, N, QMA, SMA, SMB, ......
SHENZHEN ZD TECH CO., LTD
|
Indoor/Outdoor 350-6000MHz 10/50 Watt Dummy RF Termination Load N-M for Requirements
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR......
Anhui Bonfire Technology Co., Ltd
|
High Power 50 Watt RF Load Up to 4GHz with N Male Black Anodized Aluminum
|
...Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF Termination Load......
Suzhou Terui Electronic Technology Co.,Ltd.
|
Tri-Metal Plated Brass 1 Watt RF Load Up To 18 GHz With TNC Female Input
|
...Watt RF Load Up to 18 GHz With TNC Female Input Tri-Metal Plated Brass Xi'an Elite Electronic 1 Watts RF load (also known as termination or dummy load) has a TNC connector that is female. This 1watts TNC female load / termination is rated for a maximum frequency of 18 GHz. Our TNC female termination load is a rf load termination with a 50 Ohm impedance.This TNC load / coax terminator is manufactured with no chain and brass body. The 50......
Xi'an Elite Electronics Co., Ltd.
|