3mm Impact Head Bending Test Equipment , CE Welding Bend Test Machine
|
Impact Bending Test Equipment Application This test equipment is suitable for testing mobile phones, tablets and mobile phone batteries. In the normal daily use of the simulated sample, test the degree of bending and damage to the sample caused by the impact, and use the test result as the basis for improving the strength performance of the product. Principle Place two acrylic round rods at a certain distance horizontally to support the test...
SKYLINE INSTRUMENTS CO.,LTD
|
IEC-60794-1-2 Standard Fiber Optic Cable Repeated Bending Test Equipment
|
... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and...
Dongguan Wirecan Technology Co.,Ltd.
|
Safety Helmet Impact Penetration Resistance Testing Equipment Test The Impact Resistance And Penetration Resistance
|
... head model wearing the safety helmet on the high-sensitivity force sensor, and then use a steel hammer with a mass of 5kg to impact from a height of 1m, and measure the force value at the moment of impact by the high-sensitivity force sensor device, so as...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 60312-1 5rpm Figure 28 Drum Vacuum Cleaner Head Drop Testing Equipment
|
...Drum for Impact Test Vacuum Cleaner Free Fall Testing Equipment Product Overview: This drum for impact test is customized according to IEC 60312-1 clause 7.3.10 figure 28. It is used to assess the impact resistance of the detachable cleaning head of the ......
Sinuo Testing Equipment Co. , Limited
|
AS/NZS3112 Figure 2.8 Pin Bending Test Equipment
|
AS/NZS3112-Figure 2.8 Application of force for pin bending test AS/NZS3112-Figure 2.1 (in part) dimensions of plugs AS/NZS3112-Figure 2.2 Apparatus for flexing test AS/NZS3112-Figure 2.3 Form of pin AS/NZS3112-Figure 2.4 Dimensions of insulaton on ......
Guangzhou Shice Equipment Co., Ltd.
|
Shoes Stiffness and Impact Resistance Footwear Testing Equipment Electrical Automated
|
Electrical Automated Shoes Stiffness and Impact Resistance Testing Machine Description Shoes Stiffness Tester is used to test resistance bending to France shoe shoe 39 yards, 42 yards and British shoe NO.6, NO.8. Using fixture to clamp the front of shoe (......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Repeated Electric Wire Bending Test Machine 1.1kW Suitable For Metal Wires
|
Technical parameters: 1. Sample diameter Φ 0.3- φ 10mm 2. Sample length 150-200mm 3. Bending angle ± 90 ° 4. Bending speed<60 times/min 5. Counting range 0-9999 6. Motor power 1.1kW 7. External dimensions 1000 * 600 * 330mm 8. Testing machine weight 110Kg ......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
IK04 Spring Hammer Impact Test Equipment with 0.5J Impact Energy and Polyamide Hammer Head Compliant with IEC60320-1
|
Impact Test Equipment IEC 60320-1 60068-2-75 IK04 Spring Hammer for Testing Appliance Inlets 1. Introduction 0.5J spring hammer applies for performing the impact test, to appliance inlets designed for surface-mounting and the insulating material shrouds of plug connectors and appliance outlets. 0.5J spring hammer designs according to IEC60068-2-75 test Ehb, the hammer head......
Pego Electronics (Yi Chun) Company Limited
|
EN BS ANSI Standards Safety Laboratory Testing Equipment Footwear Impact
|
...Impact Laboratory Testing Equipment Detailed Descriptions: Using electromagnet control impact head of ups and downs, and to a certain height to impacting the safety shoes of protect steel toe head , then to check the protection of steel toe head damage or deformation. Specifications: Drop hammer weight: (EN)20±0.2kg, (BS, ANSI) 22.7kg Falling altitude: (EN)0-1100mm Impact......
Dongguan Hust Tony Instruments Co.,Ltd.
|
ISO 8124-4 Impact Head from Swing Elements without Accelerometer Toys Tester Equipment
|
... mass(including accelerometer) of 4,6 kg ± 0,05 kg. The impacting part between the surface struck and the accelerometer shall be homogeneous and free from voids. Cables connected to the accelerometer shall be placed in such a way that the effect on the...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Submit your “3mm impact head bending test equipment” inquiry in a minute :