PSTC 6 Rolling Ball Tack Tester Tape Initial Adhesion Testing Machine Film Testing Equipment Film Testing Equipment Film
|
... 1. Test principle PSTC 6 Rolling Ball Tack Tester adopted the inclined plane rolling ball method and the inclined groove rolling ball method of method B: Method A: the adhesion of the adhesive tape to the steel ball when A short contact occurs between the...
DONGGUAN LONROY EQUIPMENT CO LTD
|
Rolling Ball Tack Tester with 21°31' Angle IP57 Protection and 0.1° Accuracy for Adhesive Testing
|
...Rolling Ball Tack Tester Product Description The Adhesive Testing Machine Roll Ball Tack Tester is designed to measure the initial tack of adhesive materials. The test involves placing the specimen on a board inclined at 30° and observing the number of balls that adhere for 5 seconds or more during free rolling......
Dongguan Liyi Environmental Technology Co., Ltd.
|
Tilt Angle 22° Adhesion Tape Rolling Ball Tack Tester
|
... on adhesive tape by rolling distance to determine the merits of tape tack. Machine operation procedures : Clean up chute and grounder on the tester by GB/T 4852-2002 specified ways,and after that you cannot touch them anymore. Fix test piece on hard and...
Perfect International Instruments Co., Ltd
|
20º ~40°Adjustable Angle Tape Peel Test Machine Rolling Ball Tack Tester with One Year Warranty
|
...h ASTM D 3121. It is applicable in tack tests of pressure sensitive adhesive tapes, adhesives, adhesive products.Turn the adhesive surface of specimen upward and place it onto the test plate (inclining 30°).Release freely the steel balls from large one to...
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
IEC68 120mm Adhesion Tape Rolling Ball Tack Tester
|
Professional Adhesion Tape Rolling Ball Method Initial Tack Ball Test Instrument Product use: Using the inclined ball method, when the short contact between the steel ball and the adhesive surface of the test specimen occurs with a slight pressure, the ......
Guangdong Aisry Instrument Technology Co., Ltd.
|
GB4852 Stainless Steel Adhesive Tape Initial Viscosity Tester For Sticky Product
|
...Tester For Sticky Product Specifications : This equipment is used to test the initial tack. Application: This instrument is designed according to the standard GB4852. It is used for the testing of initial tack of adhesive tapes and other sticky products. Technical data: Ball Material Stainless Steel Angles 20-60°(adjustable) Ball Size 1/32......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Initial Adhesion Tester Table Width 120mm Steel Ball 1/32 Inch ～ 1 Inch ASTM D3121
|
ST106 Initial adhesion tester The ST106 initial adhesion tester, also known as the initial adhesion tester or tape adhesion tester, is designed and manufactured in accordance with the requirements of the new version of the 2020 Chinese Pharmacopoeia "......
Shandong Shengtai instrument co.,ltd
|