Bently Nevada 3500/20 125744-02 Standard Rack Interface Module

Bently Nevada 3500/20 125744-02 Standard Rack Interface Module

Product Details:

Additional Information:

Description:

The Rack Interface Module (RIM) is the primary interface to the 3500 rack. It supports a proprietary protocol used to configure the rack and retrieve machinery information. The RIM must be located in slot 1 of the rack (next to the power supplies).

The RIM supports compatible Bently Nevada external communications processors such as TDXnet, TDIX, and DDIX. While the RIM provides certain functions common to the entire rack, the RIM is not part of the critical monitoring path and has no effect on the proper, normal operation of the overall monitoring system. One RIM is required per rack.

For Triple Modular Redundant (TMR) applications, the 3500 System requires a TMR version of the RIM. In addition to all the standard RIM functions, the TMR RIM also performs "monitor channel comparison." The 3500 TMR configuration implements monitor voting using the setup specified in the monitor options. Using this method, the TMR RIM continually compares the outputs from three (3) redundant monitors. If the TMR RIM detects that the information from one of those monitors is no longer within a configured percentof the information of the other two monitors, it will flag that the monitor is in error and place an event in the System Event List.

Relay to indicate when the 3500 rack is operating normally or when a fault has been detected within the rack. User can select either an "OPEN" or "CLOSED" contact to annunciate a NOT OK condition. This relay always operates as "Normally Energized".

Used to place 3500 rack in either "RUN" mode or "PROGRAM" mode. RUN mode allows for normal operation of the rack and locks out configuration changes. PROGRAM mode allows for normal operation of the rack and also allows for local or remote rack configuration. The key can be removed from rack in either position, allowing switch to remain in either RUN or PROGRAM positions. Locking switch in the RUN position allows you to restrict unauthorized rack reconfiguration. Locking switch in PROGRAM position allows remote configuration of a rack at any time.

Joyoung International Trading Co.,Ltd is not only the world's leading industrial equipment supplier, but also has been committed to the production of automation control system modules and spare parts for ten years.

We are located in Xiamen, a famous tourist city in China.

We are the world's leading industrial equipment supplier, specializing in the production of automation control system modules and spare parts for several years. We purchase from factories of world famous brands, such as konnad (general agent in China), Bently Nevada, abb, Invensys Triconex, GE Fanuc, Foxboro, Emerson, Epro, Schneider Modicon, Westinghouse, Siemens, Woodward, hima, Yaskawa, Bosch Rexroth, Rosemount, etc.

All of kinds of DCS、PLC parts as below:

ABB:

AC800M series module,Industrial robots spare parts DSQC series ,Bailey INFI 90,800xA,Advant OCS with Master Software,with MOD 300 software Advant OCS,Freelance - Distributed Control System for Process Industry,Symphony Melody,Satt OCS,Symphony DCI System Six,Harmony/INFI 90,Security system

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Bently Nevada:

3500/3300 Surveillance protection syste,Proximitor eddy current sensor probe

EPRO:

PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268 series Electro dynamic absolute vibration sensor MMS6000 system

VIBRO-METER:

Vibrating sensor,Acceleration sensor ,Eddy-current transducer,Monitor system module,Gateway communication module

Schneider Modicon:

Quantum 140 series:CPU processor module,Communication module,Analog input output module,Digital input output module

GE:

IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module ,Communication module ,Analog digital module

EX2100,EX2000Excitation system card ,IS200 series DS200 series

Invensys Triconex:

Redundant fault-tolerant control system,the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture

Westinghouse:

OVATION system,WDPF system,WEStation system

Honeywell:

Alcont,Experion LS,Experion PKS,Experion HS,Plant Scape

TDC 2000,TDC3000,TPS,security system

Emerson:

DeltaV system Dual - channel redundant security system Redundant controller

Power supply module I/O unit Analog AI modules Analog AO module

Siemens:

Siemens MOORE, 6ES5 series,6GK series,6DD series,6AR series

Yokogawa:

CS3000 system CPU control module,Analog module

Yaskawa:

Robots spare parts,Servo controller, Servo motor, Servo drive

Motorola (MVM):

MVME 162, MVME 167, MVME 1772, MVME 177 and other series

XYCOM:

I / O VME boards and processors.

Bosch Rexroth:

Indramat, I / O modules, PLC controllers, Drive modules, and so on.

Rosemount:

Pressure Transmitter, Flow meter

KONRAD:

EC6423/EC6424/EC6426/EC6430/EC6432/EC6433 series eddy-current transducer

EC20382 displacement sensor,MMS7000 Surveillance protection system

ENTEK:

Eddy-current transducer probe，Vibration monitoring table double channel axis vibration monitoring table C6652

Invensys Foxboro:

I/A Series system,FBM(input / output modules) sequential control,Ladder logic control, Accident recall processing,Digital-to-analog conversion,Input / output signal processing,Data communication and processing

Woodward:

SPC valve position controller 505/505E(9907-162,9907-164,9907-165,9907-167)digital controller

2301A controller 9905 series 2301D-ST series