BSD-68601 The High-Performance Additive for Modern

Gasoline Engines

Unlock peak engine performance and protection with our advanced BSD-68601 additive package. Specifically formulated for mid-to-high-tier engine oils, this powerful solution delivers:

Maximum Engine Defense: Combats sludge, oxidation, rust, and wear at both high and low temperatures, significantly boosting the durability of critical engine components.

Emission System Care: Its advanced chemistry is designed to protect your catalytic converter and oxygen sensor from poisoning and failure, ensuring compliance with emission standards.

Enhanced Efficiency: By reducing friction, this package not only protects your engine but also contributes to better fuel economy and lower harmful emissions.

Scope of Application and Dosage

Easily formulate oils meeting GB11121, API, and ILSAC standards with API Group I-IV base oils. Simple dosage: 4.6% for SJ, 5.6% for SL.

Product Appearance

Packaging and Acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.
• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.

• When adjusting oil, the maximum temperature should not exceed 75 ℃.

• Long term storage temperature should not exceed 50 ℃.

• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).