Proline Prosonic Flow P 500 ultrasonic clamp-on flowmeter

"Specs at a glance
Max. measurement error
Volume flow:
±3% o.r. for DN 15
±2% o.r. for DN 25 to DN 200
±2% o.r. above DN 200

Measuring range
0 to 15 m/s (0 to 50 ft/s)

Medium temperature range
DN 15 to 65 (½to 2½""): –40 to +150°C (–40 +302 °F)
DN 50 to 4000 (2 to 160""): –40 to +170°C (–40 to +338 °F)
DN 50 to 600 (2"" to 24""): 150°C to 550°C (+302 to +1022 °F)

Max. process pressure
N/A" "Field of application
Prosonic Flow P 500 is the ultrasonic clamp-on flowmeter of choice for safe and maintenance-free measurement of conductive and non-conductive liquids, even in challenging applications. It measures flow noninvasively and bidirectionally, independent of pressure, density and conductivity, and without process interruption.

FlowDC makes mounting as flexible as never before. The specified accuracy is maintained at an inlet run of only 2 x DN, even in the case of disturbed flow profiles.

Special coupling pads make this ultrasonic clamp-on system maintenance-free during the entire product life cycle.

In addition, Prosonic Flow P 500 is available with:

high-temperature sensors for measurement up to 550 °C (1022 °F)

a Petroleum Application Package (PAP), calculating the standard volume for liquid hydrocarbons

Heartbeat Technology, providing continuous process transparency. This way, build-up can be detected before it affects operation " "Benefits
Flexible mounting – FlowDC reduces inlet runs to a minimum

High safety standards – Prosonic Flow P 500 is developed according to IEC 61508 functional safety requirements and holds international approvals for hazardous area, Zone 1 and Class I, Division 1

Reliable measurement performance – proven sensors in combination with maintenance-free mounting system deliver long-term stable signals, also in high-temperature applications (≤550 °C/1022 °F)

User-friendly operation – the web server offers full remote access, while the device’s touch display offers convenient on-site interaction

Transparent process insights – Heartbeat Technology with its integrated diagnostics, verification and monitoring functions enable compliance and process safety at all times

Low capital investment – cost-effectiveness increases with the pipe diameter (up to DN 4000/160"") " "Measuring principle
Ultrasonic flow

Product headline
Clamp-on flowmeter for limited spaces in process industries with up to 3 I/Os.
Constant accuracy even when mounted with short inlet run thanks to FlowDC.
Bidirectional measurement of various fluids, e.g. liquid hydrocarbons and chemicals.

Sensor features
High safety standards – SIL by design,
international hazardous area approvals. Long-term stable signal – maintenance-free
permanent mounting from outside with coupling pads. Reliable measurement on various pipe materials – sensor for GRP and plastic pipes available.
Mounting without process interruption. Wide nominal diameter range: DN 15 to 4000 (½ to 160""). Medium temperature: –40 to +550 °C (–40 to +1022 °F).

Transmitter features
Full access to process and diagnostic information – numerous, freely combinable I/Os. Reduced complexity and variety –
freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 3 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.

Nominal diameter range
Dual channel, 1 or 2 paths : DN 15 to 4000 (1/2 to 160"")

Sensor materials
Clamp on system:
Sensor holder 1.4301/304, 1.4404/316L
Sensor housing 1.4301/304, 1.4404/316L
Strapping bands 1.4301/304, 1.4404/316L

Measured variables
Volume flow, sound velocity, flow velocity, totalizer

Max. measurement error
Volume flow:
±3% o.r. for DN 15
±2% o.r. for DN 25 to DN 200
±2% o.r. above DN 200

Measuring range
0 to 15 m/s (0 to 50 ft/s)

Max. process pressure
N/A

Medium temperature range
DN 15 to 65 (½to 2½""): –40 to +150°C (–40 +302 °F)
DN 50 to 4000 (2 to 160""): –40 to +170°C (–40 to +338 °F)
DN 50 to 600 (2"" to 24""): 150°C to 550°C (+302 to +1022 °F)

Ambient temperature range
–40 to +60 °C (–40 to +140 °F)
–50 to +60 °C (–58 to +140 °F) optional

Sensor housing material
N/A

Transmitter housing material
AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L

Degree of protection
Sensor remote version: IP68 type 6P
Transmitter remote version: IP66/67, Type 4X enclosure

Display/Operation
4-line backlit display with touch control(operation from outside)
Optional: WLAN
Configuration via local display and operating tools possible

Outputs
3 outputs:
4-20 mA HART (active/passive)
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output

Inputs
Status input
4-20 mA input

Digital communication
HART, Modbus RS485

Power supply
DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)

Hazardous area approvals
ATEX, FM/CSA, EAC, UK Ex, KC

Other approvals and certificates
Other approvals and certificates

Product safety
CE, C-tick, EAC-marking

Functional safety
Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

Metrological approvals and certificates
Flowmeter verification for all frequencies except 0.3 MHz, reference line size: 5 MHz DN 50, all other frequencies DN 100
Verification performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a"

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.