HT19 Silicon Piezoresistive Pressure Sensor
Introduction:
HT19 is a high-performance silicon piezoresistive pressure sensor,
engineered with a core featuring a highly stable diffused silicon
sensing element. It operates by transferring the pressure of the
measured medium to the silicon diaphragm via an isolation diaphragm
and silicone oil, ensuring accurate and reliable measurement of
both liquid and gas pressures. Its versatile design and robust
construction enable extensive application across demanding
environments, including air compressors and refrigeration systems,
where consistent and precise pressure monitoring is essential for
operational efficiency and safety.
Product Features:
1. The sensor employs advanced manufacturing technology and
features a durable 316L stainless steel housing. It also offers
optional high-performance diaphragm materials, including titanium
and Hastelloy, to ensure superior corrosion resistance and
long-term reliability in demanding environments.
2. To enhance measurement accuracy, a thick-film circuit is
integrated for precise temperature compensation and zero-point
calibration, minimizing drift and ensuring consistent performance
across varying operating conditions.
3. With excellent reliability, repeatability, and long-term
stability, the sensor is designed to deliver dependable performance
in critical applications, reducing maintenance needs and
operational downtime.
Applications:
1. Suitable for measuring non-corrosive gas and liquid pressure
with 316L stainless steel compatibility
2. Applied in various industrial process sites, including
petroleum, chemical, metallurgy, power, and hydrology
3. Used in marine and aviation industries
4. Suitable for hydraulic and pneumatic control systems
5. Utilized in process control applications
Electrical performance:
1. Power Supply: ≤2mA DC (Typical 1.5mA DC)
2. Input Impedance:3KΩ~6KΩ
3. Output Impedance:2.5KΩ~6KΩ
4. Electrical Connection:Gold-plated Kovar pins or 100mm
high-temperature wires.
| Performance Parameters: |
| Range | Gauge(G) | 10KPa,20KPa,35KPa,100KPa,200KPa,350KPa,1000KPa,2000Kpa |
| Absolute(A) | 100KPaA,200KPaA,350KPaA,700KPaA,1000KPaA,2000KPaA |
| Sealed(S) | 3500KPaS,7MPaS,10MPaS,20MPaS,40MPaS,60MPaS |
| Typ | Max | Unit |
| Nonlinearity | ±0.15 | ±0.3 | %F.S |
| Repeatability | 0.05 | 0.1 | %F.S |
| Hysteresis | 0.05 | 0.1 | %F.S |
| Zero Output | 0±1 | 0±2 | mV |
| Span Output | ≤20KPa | 50±10 | 50±30 | mV |
| ≥35kPa | 100±10 | 100±30 | mV |
| Temperature Error-Zero | ≤20KPa | ±1 | ±2 | %F.S |
| ≥35kPa | ±0.5 | ±1 | %F.S |
| Temperature Error-Span | ≤20KPa | ±1 | ±2 | %F.S |
| ≥35kPa | ±0.5 | ±1 | %F.S |
| Compensated Temp. | ≤20KPa | 0~50 | ºC |
| ≥35kPa | 0~70 | ºC |
| Operating Temperature | -20~80 | ºC |
| Storage Temperature | -40~125 | ºC |
| Allowable Overload | Take the smaller value between 3 times the full scale or 120MPa | |
| Burst Pressure | 5X the full scale | |
| Long-term Stability | 0.2 % | F.S/Year |
| Diaphragm Material | 316L | |
| Insulation Resistance | ≥200MΩ 100VDC | |
| Vibration | No change under conditions of 10gRMS, 20Hz to 2000Hz | |
| Shock | 100g,11ms | |
| Response Time | ≤1ms | |
| O-ring Seal | Nitrile ring or Fluoro ring | |
| Filling Medium | Silicon Oil | |
| Weight | about 20g | |
| The parameters are tested under the following conditions: 1.5mA @
25°C |
| Outline Construction |
| type1 |  |
| type2 |  |
| Electrical connection and compensation |
|
1. Pay attention to the fit between the core size and the
transmitter housing during assembly to achieve the required airtightness
2. During the assembly of the housing, ensure it is aligned
vertically and apply even pressure to avoid jamming or damaging the
compensation plate.
3. If the measured medium is not compatible with the core diaphragm
and the housing material (316L), special instructions should be
provided when placing the order.
4. Avoid pressing the sensor diaphragm with hands or sharp objects
to prevent damage to the core due to diaphragm deformation or
piercing.
5. Keep the pressure port of the gauge pressure core open to the
atmosphere and prevent the entry of water, water vapor, or
corrosive media into the core negative pressure chamber.
6. If there are any changes to the pin leads, follow the label on
the actual core for reference.
1.Q: What are the features of your pressure sensor transmitters?
A: High precision, durability, and excellent performance.
Customization available.2.Q: Can I customize special specifications?
A: Yes, our engineers can tailor products to meet specific needs. We provide OEM and ODM service3.Q: What is your production capacity?
A: Our manufacturing facilities can produce up to 30,000 pressure
sensor transmitters per month, so we are fully capable of meeting
the needs of large-scale orders. However, it is advisable to
contact our sales team in advance to ensure smooth production and
delivery scheduling
.4.Q: What's the typical delivery period?
A: 5~8 working day for standard models. Customized products may
vary.5.Q: How are the products priced? Any discounts?
A: Competitive pricing with discounts for bulk orders or long-term
partners
.6.Q: What is the warranty of your products? And after-sales
service?
A: Our warranty time is 24 months after shipment, and our
after-sales will respond with your questions in 24hrs, remote
instruction by PC network is always available.
HT20V Diffused Silicon Pressure Sensor 10VDC Piezoresistive Differential Pressure Sensor Cell
