0.63-Inch OLED Display Module with 120x28 Resolution and I2C Interface

• I2C interface support for simple wiring and stable data transmission, reducing integration complexity for compact electronic products
• Ultra-compact 0.63-inch size with 120×28 resolution, perfect for space-constrained devices requiring essential display functionality
• Wide operating temperature range (-40℃ to +85℃) adapts to extreme indoor, outdoor and industrial environment applications
• High contrast ratio of 2000:1 for sharp, clear visuals with excellent readability in various lighting conditions
• Equipped with SSD1312 driver IC, ensuring reliable performance, low power consumption and smooth display effects
• Long lifetime (50,000 hours at 60 cd/m² brightness) for durable use in long-term operation scenarios
• Low sleep mode current (1μA typical) ideal for battery-powered portable devices requiring extended standby time
• Free viewing angle design for convenient readability from multiple directions without color distortion
• Precision manufacturing with strict tolerance control (±0.3mm) for consistent product dimensions and reliable assembly

• Smart wearables (mini fitness trackers, small sports bracelets, compact health monitors)
• Portable electronic devices (handheld meters, tiny detectors, mini data loggers, compact scanners)
• IoT terminals and smart sensors (environmental monitors, wireless controllers, small smart home sensors)
• Industrial control systems (compact PLC panels, sensor data displays, mini industrial controllers)
• Small consumer electronics (portable audio players, miniature remote controls, tiny POS machines)
• Automotive electronics (in-vehicle small displays, secondary control panels, tire pressure monitors)
• Medical devices (portable medical monitors, small diagnostic equipment, compact health testing tools)
• DIY electronics and hobby projects (Arduino/Raspberry Pi compatible displays, compact electronic prototypes)
• Space-constrained devices (microcontrollers, tiny embedded systems, compact IoT nodes)

• Interface Optimization: I2C address adjustment and communication parameter customization to match specific MCU requirements
• PCB Customization: PCB size, shape and pin layout adjustments for special installation scenarios
• Polarizer Customization: Anti-glare, wide-view polarizer options for outdoor or special viewing environment needs
• Brightness Tuning: Custom brightness levels (220-270 cd/m²) to meet specific application requirements
• Packaging Solution: Custom anti-static packaging, vacuum packaging with desiccant for long-term storage (over 6 months)
• Warranty Extension: Extended warranty options (18~24 months) for bulk orders (500+ pcs)
• Labeling Service: Custom part number or logo printing on PCB for inventory management and brand promotion
• Power Configuration: Custom DC/DC converter settings for specific voltage requirements

1. Electrostatic Protection: Use anti-static bracelets and grounded tools during handling. Avoid assembly in dry environments (recommended relative humidity 45%~60%). Do not touch pins, PCB patterns or polarizer directly with bare hands.
2. Cleaning Instructions: The polarizer surface is fragile and scratch-prone. Clean with Scotch Mending Tape No. 810 or equivalent. Do not use water, ethyl alcohol, ketone or aromatic solvents—they may damage the polarizer.
3. Storage Conditions: Store in anti-static bags at 23±5℃, humidity ≤45±20%RH. Avoid direct sunlight, high temperature/humidity or low temperature environments (below 0℃). Use modules within 6 months; recheck performance if stored over 12 months.
4. Operation Precautions: Follow correct power-on/power-off sequences (100ms delay required) to avoid damage. Do not apply signals when power is off; avoid fixed pattern display for long periods to prevent afterimages.
5. Soldering Tips: Welding temperature: 320~350℃; Welding time: ≤10 seconds per pin. Do not stay too long in the same place to avoid PCB or pin damage. Main board design must include electronic switch to prevent leakage current.
6. Mechanical Protection: Do not crush, shake or jolt the module. The panel is glass-based, so avoid mechanical impacts. Do not apply pressure to the display surface or bend FPC excessively.
7. Light Shielding: Shield the OLED driver from light in product design to prevent malfunction caused by light exposure.
8. Power Supply: Install overcurrent protection (0.5A fuse recommended) on VDD power circuit. Do not exceed absolute maximum ratings to prevent permanent damage.

Cooperation Partners

Shipment&Payment