Low Watt Density PTFE Immersion Heater Chemical Resistant For
Semiconductor
Excellent Chemical Resistance Low Watt Density Immersion PTFE
Semiconductor Heater
Voltage: 110V-480V
Power: 3KW-36KW/Set
Dimension: According to the tanks size of customer
Material: PTFE+PFA heating wire
Usage: Put on the bottom of the chemical tank to heat up the tank
solutions.
Industries
Semiconductor
Ultra-High-Purity Solutions
Surplus designs and manufactures thermal solutions and power
supplies to meet the most stringent cleanroom, ultra-high-purity
(UHP) processes, and customer requirements of the Semiconductor and
Wafer Processing industries.
Applications
- Wet-Deposition
- Flammable Solvent Heating
- Chemical Heating
- RO/DI Water Heating
- Ultra-High-Purity Heating
PRODUCT OVERVIEW
Heaters For Semiconductor are great for heating fluid baths to a
constant temperature. These heaters are ideal for use in the
semiconductor, pharmaceutical, and biomedical industries. These
immersion heaters provide clean heat evenly and efficiently.
They're compact and highly customizable, providing a maximum
process work area while consuming minimal chemicals. Wetted
surfaces feature all-PFA materials, and may be used in tanks made
of PVDF, PFA, or quartz.
BOTH AGGRESSIVE CHEMISTRIES AND DEIONIZED WATER
These rugged and durable heaters come in grid, frame, and fence
models, with outputs of 1.0 to 30.0 kW. They feature a low watt
density (≤ 4 watts/in²) for fast heating response and integrate
easily into most process tanks. Provide Surplus with your
specifications and tank size for a custom immersion heater
solution.
SAFETY FEATURES
At the heart of these immersion heaters is the patented
PreciseHeater heating coil, with > 99% efficiency and MTBF of
more than 10 years. A microprocessor-based temperature controller
regulates heater output. Optional safety features include platinum
and embedded ground wires, Type-J process thermocouple, and RTD
over-temperature and process thermocouples.
KEY SPECIFICATIONS
Maximum heating temperature: 200°C (392°F) with ± 0.1°C accuracy
(contingent on customer's facilitation). Grid heaters are typically
¾" high, and frame heaters 1½" high. Outputs range from 1.0 to 30.0
kW (dependent on customer voltage), from 120 VAC to 480 VAC, 1 or
3-ph (dependent on wattage).
Specifications
| Heater Element | Heating Coil |
|---|
| Wetted Surfaces | PFA/PTFE |
| Wattages | 1.0 - 20 kW |
| Voltages | 120 - 480 VAC
1 or 3 phase |
| Sizes (LxW) | 7x5 to 19x14 inch |
| Height | 1-5/8 inch |
| Temperature | 200°C (392°F) |
| Hi-Limit Sensor | Type-J thermocouple |
| Ground Wire | Encapsulated |
| Lead Wire | 15-ft |
Other Applications
Ultra-High-Purity Heating
Designed with Ultra-High-Purity processes in mind, Surplus delivers
clean-room assembled, reliable heating and power solutions to fit
specific needs.
Products For Ultra-High-Purity Heating
Inline Heater
PFA Inline Heater
Inline Chemical Heater
Acid Heating And Corrosive Chemical Heating
Built to withstand the stress of acids or other corrosive chemicals
while maintaining the highest quality and safety standards, Process
Technology fluoropolymer (PTFE) heaters and exchangers are
engineered to perform.
Acid Heating And Corrosive Chemical Heating
3HX Series
HXT SERIES - SCREWPLUG
9HX SERIES
Inline PTFE Semiconductor Industrial Immersion Heater For 140 Celsius KOH Solution
