Underground Pipe Cable Locator Utility Detection Equipment

Color display screen

480*272 pixels, 16-bit pixel, high-precision 4.3-inch LED display, suitable for use in sunlight.

Power

6pcs AA alkaline batteries, with optional rechargeable lithium batteries.

Battery life

• Alkaline batteries – typically provide up to 12 hours of continuous use at 21 ºC.
• Lithium batteries – typically provide 12-27 hours of continuous use at 21 ºC (with all backlights on).

Displayed information

• Signal Strength - Moving Attention and Values
• Mode Indicators ("Peak Mode", "Valley Mode", and "Peak Arrow" Positioning Modes)
• Compass: Direction Indicator
• Signal Direction
• Line Positioning – Depth and Current Measurements
• Gain Level (dB)
• Battery Status, Speaker Volume, Operating Frequency, Configuration Menu and Submenus

Internal data log

• At least 50 million records
• Each location point stores all data, including depth, current, mode, gain setting, and frequency
• Can be saved in .kml, .xls, .txt, .csv, and .shp formats

Data memory

4GB

Operating frequency

Power50, Radio, 50Hz, CP100, 128Hz, 256Hz, 32.8kHz, 512Hz, 640Hz, 8.19KHz, 8KFF, CATV, 32.8kHz, 65.5kHz, 83.1kHz, 131kHz, 200kHz

Performance when using a single, distortion-free signal source

• Measurement accuracy
• Positioning and depth measurement accuracy ±2.5%
• Current measurement accuracy ±2.5%

Transmitter compatibility

Loc-150Tx, Loc-25Tx,Loc-10Tx, Loc-5Tx, Loc-1Tx

Distortion signal identification

The red, blue, and green color codes are used to display the distortion level.

Multiple detection modes

• Classic positioning mode
• Tracer probe mode

Classic positioning mode

• Peak value
• Valley value
• Peak arrow
• Broad peak
• Double valley plot
• Omnidirectional peak value
• Omnidirectional broad peak value

Tracer probe mode

PE pipe path detection best choice

Real-time pointing of the tracer probe's position

Protection level

IP65

Software upgrade

Free software upgrades, no hardware changes required.

Detection range

0~30m

Warning function

• Overhead cable warning
• Excessive sway warning
• Shallow burial depth warning
• Signal overload warning

Self-test function

The equipment can be calibrated on-site at any time without having to return it to the factory for calibration.

Operating temperature

-20℃ ~ +50℃

Quality certification

complies with CE and FCC certifications and is ISO9001 certified.

Output frequency

640HZ/8.19KHZ/8.44KHZ/32.8KHZ/82.5KHZ/131KHZ and so on more than 40 frequencies

Mixer output

The transmitter supports simultaneous output of two and three frequency signals.

Output power

Output power not less than 10W, maximum output current not less than 999mA

Power

Alkaline batteries offer a working time of >20 hours; rechargeable lithium batteries are optional.

Software upgrade

Automatic upgrades via USB 2.0 interface, requiring no hardware modifications.

Quality certification

complies with CE and FCC certifications and is ISO9001 certified.