Product Details
Company Profile

ZWS-B Double-Section Wall Cabinet with Swing Rear Section and Flat-Pack Delivery for Efficient Network Installations

ZWS-B Double Section Wall Cabinet

The ZWS-B Double Section Wall Cabinet is a double-section 19-inch wall-mounted enclosure designed for network, telecom, and security installations where space efficiency and rear access are required, with a swing-frame structure that improves cable management and maintenance accessibility.

Network Integrators
Telecom Contractors
Security Installers
IT Procurement Teams
Project Managers
Maintenance Teams

Quick Takeaway

A double-section wall cabinet for indoor network, telecom, and security deployments where rear access matters.
The swing rear section improves maintenance convenience compared with a fixed single-section wall cabinet.
Flat-pack delivery helps reduce shipping space and transport cost in project procurement.

Reserved Image Module

Add front view, swing-open rear access view, flat-pack display image, or installation photo here.

Reserved Video Module

Suitable for swing-frame demo, flat-pack assembly video, maintenance access explanation, or factory overview.

■1) Overview

The ZWS-B Double Section Wall Cabinet is a 19-inch wall-mounted enclosure designed for network, telecom, and security installations where both space efficiency and rear access are required. It combines a double-section layout with a swing rear section, making it more service-friendly than a basic fixed-body wall cabinet.

For engineering and procurement teams, the main value of this model is practical maintenance access plus transport efficiency. In addition to its swing-frame service logic, the cabinet also supports cost-efficient flat-pack delivery, which can help reduce logistics footprint in project shipments.

Field reality

Wall cabinets are often chosen for space savings, but maintenance usually becomes the real issue later. A double-section swing structure is valuable when rear-side cable access cannot be ignored after installation.

■2) Key Features

The ZWS-B is designed for sites where service access, cable organization, and transport efficiency all matter. Its feature set is focused on making installation and later maintenance more manageable in indoor edge environments.

Feature	What It Means	Project Benefit
Welded Steel Structure	Precise, durable cabinet construction	Improves structural confidence and service life
Double-Section Design	Compatible with standard 19-inch equipment	Supports easier servicing than fixed single-section cabinets
180° Glass Front Door	Easy front-side installation and servicing	Improves inspection and front access efficiency
Removable Side Panels	Quick access with optional lock	Adds maintenance flexibility
Swing Rear Section	Back frame swings over 90°	Makes rear access and cable work easier
Top & Bottom Cable Entry	Knock-out design for flexible routing	Helps adapt to site-specific cable directions
Adjustable Mounting Rails	L-shaped profiles for depth adjustment	Improves equipment fit accuracy
Fan-Ready Top Panel	Supports ventilation upgrade	Useful for active equipment in enclosed spaces
Flat-Pack Delivery	Saves shipping space and transport cost	Improves logistics efficiency for larger project orders

■3) Technical Specifications

Item	Specification
Rack Standard	19-inch
Frame Material	SPCC high-quality cold rolled steel
Mounting Profile Thickness	1.2 mm
Other Parts Thickness	1.0 mm
Surface Treatment	Degreasing → Pickling → Phosphating → Powder Coating
Static Loading Capacity	Up to 30 kg
Protection Level	IP20
Front Door	180° glass front door, with multiple door styles shown in structure diagram
Swing Rear Section	Back frame swings over 90°
Cable Entry	Top and bottom cable entry with knock-out design
Ventilation	Fan-ready top panel
Standards Compliance	ANSI/EIA RS-310-D, IEC 60297-2, DIN 41497 Part 1, DIN 41494 Part 7, GB/T 3047.2-92

Key takeaway

30 kg static load places this series in the light-duty indoor application category.

Flat-pack delivery is a meaningful logistics advantage for shipping and project cost control.

Swing rear access remains the main functional reason to choose this series over a standard single-section wall cabinet.

■4) Construction / Materials

The ZWS-B uses a steel-based double-section architecture built around mounting plates, rear door, frame, inner swing frame, side panels, and mounting rails. The structure is designed to combine wall-mount space efficiency with more service-friendly access than a fixed cabinet body.

Component	Qty	Material / Spec	Surface Finish	Notes
Mounting Plate	4 pcs	0.8 mm cold rolled steel	Powder coated	—
Rear Door	1 pc	1.2 mm cold rolled steel	Powder coated	With lock
Frame	1 pc	1.2 mm cold rolled steel	Powder coated	Main cabinet frame
Inner Swing Frame Door	1 pc	1.2 mm cold rolled steel	Powder coated	Supports rear access structure
Side Panel	2 pcs	0.8 mm cold rolled steel	Powder coated	Removable
Mounting Rail	4 pcs	1.2 mm cold rolled steel	Powder coated	Adjustable L-shaped profile
Lock / Screws / Nuts / Wrench	Included set	Project hardware	—	Assembly and service support

Practical rule

If the project values rear maintenance access and shipping efficiency at the same time, a double-section flat-pack design can be a more economical long-term choice than a basic fixed wall cabinet.

■5) Applications

The ZWS-B is best suited to indoor projects where equipment density is moderate, space is limited, and technicians still need rear access for cable routing, service work, or future upgrades. It is particularly practical for organized edge-side deployments that benefit from lower transport cost.

Application Scenario	Why ZWS-B Fits	What to Verify Before Approval
Network edge point	Swing rear access improves cable and service convenience	Wall opening clearance and real device depth
Telecom distribution installation	Organized 19-inch wall cabinet with rear accessibility	Cable direction, service plan, accessory need
Security / CCTV site	Useful where enclosed devices still need periodic service access	Heat load, lock logic, cooling planning
Space-limited indoor environment	Wall-mounted format saves footprint while keeping better service access	Swing radius, aisle width, nearby obstructions
Project shipments needing logistics efficiency	Flat-pack delivery helps reduce shipping space and transport cost	Assembly capability, packaging expectations, delivery planning

■6) Decision Rules / Engineer’s Shortcut

The key engineering question is whether the site really benefits from rear access and flat-pack shipment efficiency. If yes, ZWS-B can be more practical than a simple single-section wall cabinet. If not, a simpler cabinet may be enough.

Decision Point	Choose ZWS-B When	Do Not Choose It When	Alternative Direction	Cost / Risk / Maintainability Impact
Rear access need	Technicians will need rear-side access after installation	Front-only access is sufficient for the full lifecycle	Use a single-section wall cabinet	Correct choice reduces future service labor
Logistics concern	Shipping space and transport cost matter in the project	Logistics efficiency is not a priority	Choose based purely on service requirements	Flat-pack can improve total delivery economics
Load level	Total installed load stays within 30 kg	Heavier equipment or stronger reserve is needed	Select a heavier-duty cabinet platform	Wrong load planning creates safety and reliability risk
Swing clearance	There is enough room to open the rear section over 90°	The site is too constrained for proper opening	Rethink mounting position or use a different enclosure type	Without opening space, the main service benefit is lost
Depth fit	550 mm or 600 mm depth options match real device layout	Device body plus cable allowance exceed usable space	Move to a deeper or different cabinet type	Depth mismatch causes installation delay and rework
Thermal planning	Heat load is moderate and ventilation upgrade is enough	The site needs stronger thermal strategy from the start	Add cooling modules or choose a more airflow-oriented solution	Better thermal planning improves stability and equipment life

Practical rule

Choose ZWS-B when rear maintenance access is important, total load stays under 30 kg, swing clearance is available, and shipping efficiency is part of the project decision.

■7) Selection Guide

A correct ZWS-B choice should be based on service workflow, shipment economics, and actual device layout. Procurement teams often compare only cabinet size, but the more important factors are rear access value, load control, depth match, and assembly expectation.

Selection Factor	Question to Ask	Recommendation
Rear access value	Will rear-side cable or equipment access be useful during the cabinet’s life?	If yes, double-section structure is often justified
Shipment planning	Is reduced shipping volume important for the project?	Flat-pack delivery can improve logistics efficiency
Load	Does the full installed load remain within 30 kg?	Count all mounted devices and accessories, not only rack units
Depth	Will 550 mm or 600 mm depth fit equipment plus connector allowance?	Measure real installed depth before approval
Swing opening	Can the rear section open fully in the chosen wall position?	Verify nearby wall, conduit, and aisle clearance first
Assembly expectation	Is the site ready to handle flat-pack delivery and assembly workflow?	Confirm installation process with the project team in advance

Part No.	Height (U)	Width (mm)	Depth (mm)	Cabinet Height (mm)
ZWS-B06-655	6U	600	550	370
ZWS-B09-655	9U	600	550	503.3
ZWS-B12-655	12U	600	550	636.7
ZWS-B15-655	15U	600	550	770
ZWS-B18-655	18U	600	550	903.4
ZWS-B06-660	6U	600	600	370
ZWS-B09-660	9U	600	600	503.3
ZWS-B12-660	12U	600	600	636.7
ZWS-B15-660	15U	600	600	770
ZWS-B18-660	18U	600	600	903.4

■8) Model List

The ZWS-B series is available from 6U to 18U with 600 mm width and 550 mm or 600 mm depth options. This makes it easier for project teams to standardize cabinet selection while matching both device layout and wall-space constraints.

6U, 9U, 12U, 15U, and 18U models are available.
Depth options include 550 mm and 600 mm.
Cabinet height scales with rack-unit count, helping teams plan wall occupation more accurately.
The part-number structure supports easier procurement standardization across multiple project sizes.

■9) FAQ

1. What is the main advantage of the ZWS-B double-section cabinet?

Its main advantage is the combination of rear access and space-efficient delivery. The swing rear section improves maintenance access, while flat-pack delivery can reduce shipping cost.

2. Is this cabinet suitable for heavy-duty equipment?

No. The stated static loading capacity is up to 30 kg, so it is intended for lighter-duty indoor applications.

3. When should I choose this instead of a single-section wall cabinet?

Choose it when rear cable access and easier servicing are important, or when the project benefits from more efficient flat-pack shipment.

4. Does it support multiple front door styles?

Yes. The structure diagram shows glass, steel, and perforated steel door options depending on visibility and airflow requirements.

5. What should be checked before fixing the cabinet location?

Check wall strength, swing opening clearance, front service space, cable-entry direction, and whether the site can support the planned assembly workflow.

6. What accessories or additions should be considered?

Consider cooling upgrade, cable-management accessories, and any configuration that supports the actual maintenance and routing needs of the project.

■10) Conclusion

The ZWS-B Double Section Wall Cabinet is a practical solution for indoor network, telecom, and security deployments where rear access and transport efficiency both matter. Its swing rear section improves maintenance convenience, while flat-pack delivery supports more economical shipping for project orders.

For best results, select the cabinet based on real maintenance workflow, total load, equipment depth, swing clearance, and logistics planning. When those factors are aligned early, ZWS-B becomes a service-friendly and project-efficient wall-mount cabinet choice.

Product Tags:


*From:	Your email address is incorrect!
*To:	HANGZHOU ZION COMMUNICATION CO., LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Cabinet And Rack
Brand Name:	Zion communication OR OEM
Model Number:	Network Rack Cabinet
Certification:	ISO, CE, RoHS, UL
Place of Origin:	CHINA
MOQ:	1,000 PCS
Payment Terms:	T/T,L/C
Supply Ability:	30,000 PCS / Month
Delivery Time:	Normally 10 workingdays
Packaging Details:	1 PC/Plastic Bag, PCS/Carton
Model:	Network Rack Cabinet
Bnad:	Zion Communication
Color:	Black,Grey
Loading Capacity:	60kg