86120 UV Energy Meter

There are two measurement modes. One is Manual mode which needs to start up or end of measurement manually.
Another is automatic modes that can automatic switch-on or end of measurement when the energy intensity emitted
by the light source is above or below the trigger threshold that can be set.

There are four interfaces to help you know better about UV light source you tested: In maximum values interface,
you can acquire cumulative energy value, maximum power value and maximum temperature value.
Measurement time can be recorded in RT interface. In temperature and power curve interface,
you can know the temperature change and energy intensity variation of the light source. Four interfaces can be switched freely.

The 86120 UV Energy Meter can be connected to PC software,
which allows you to generate reports and print out test results, as well as to export test data.

High-accuracy and fast-response temperature detector, truly dynamic measurement of the actual temperature in the curing machine.

Built-in heat shield, high temperature resistant design.
The UV energy meter can run in the environment of 100 degrees Celsius for a long time.
For details on the high-temperature resistance experiments of the UV energy meter,
you can click the article below to check: Use Time of UV Energy Meter at Different High Temperature.