Product Details
Company Profile

Intelligent Power Module Jilin Sino-Microelectronics SPE10S60F-A with Integrated Protection Features

Intelligent Power Module (IPM) SPE10S60F-A

The SPE10S60F-A is an Intelligent Power Module (IPM) designed for applications requiring efficient power conversion. It features a 600V/10A three-phase inverter with integrated low-loss trench gate-field stop IGBTs. The module includes enhanced IGBT drive capabilities, such as interlocking, high-speed level conversion, and protection features like undervoltage and short-circuit protection. Its versatile input interface is compatible with 3.3V and 5V signals, and it incorporates temperature detection via a negative temperature coefficient thermistor.

Applications

Refrigerator compressor
Lampblack machine
Electric fan
Air purifier
Dishwasher pump
Air-conditioning inside/outside units

Product Features

Lower arm IGBT emitter output with built-in bootstrap diode.
600V/10A three-phase inverter with low-loss trench gate-field stop IGBTs.
IGBT drive with enhanced input filtering, upper/lower arm interlocking, high-speed 600V level conversion, power supply undervoltage protection, and short circuit (overcurrent) protection.
Fault signal output for short circuit (overcurrent) and VP1 power undervoltage faults.
Input interface compatible with 3.3V & 5V input signals (high level effective).
Temperature detection via negative temperature coefficient thermistor.

Product Information

Order Number: 2A01-0356-16
Product Name: SPE10S60F-A
Marking: SPE10S60F-A
Package: DIP25-FP
Description: 600V/10A Three-phase full-bridge intelligent power module
Halogen-Free: Tube and Reel options available (N/A for Tube)

Technical Specifications

Parameter	Symbol	Condition	Min.	Typ.	Max.	Unit
Absolute Maximum Ratings
Supply voltage	VCC	Applied between P-NU, NV, NW			450	V
Supply voltage (including surge)	VCC(Surge)	Applied between P-NU, NV, NW			500	V
Collector to emitter voltage	VCES				600	V
Collector current	IC	TC = 25C			10	A
Collector current (peak)	ICP	TC= 25C, pulse width < 1ms			20	A
Collector power consumption	PC	TC = 25C, single chip			24	W
Junction temperature	Tj		-40		150	C
Upper arm control supply voltage	VDB	Applied between UFB-U, VFB-V, WFB-W			17.5	V
Control supply voltage	VD	Applied between VP1-VNC			17.5	V
Input signal voltage	VIN	Applied between UP, VP, WP, UN, VN, WN-VNC	-1		10	V
Fault output voltage	VFO	Applied between FO-VNC	-0.5		VD+0.5	V
Fault output current	IFO	FO terminal sink current value			1.5	mA
Input voltage of current detection terminal	VSC	Applied between CIN-VNC	-0.5		VD+0.5	V
Power supply voltage self-protection range (short circuit)	VCC(PROT)	VD = VDB = 13.5 ~ 16.5V, Tj= 150C, no repetition, time < 2us			400	V
Module working temperature	Tc	-20Tj 150C	-20		100	C
Storage temperature	Tstg		-40		125	C
Insulation withstand voltage	Viso	Sine wave 60Hz, AC for 1 min, between pin and heat sink			1500	Vrms
Thermal Resistance
Junction to case thermal resistance (Single IGBT)	Rth(j-c)Q				5.2	C/W
Junction to case thermal resistance (Single FRD)	Rth(j-c)F				5.9	C/W
Electrical Characteristics
Collector to emitter saturation voltage	VCE(sat)	VD = VDB = 15V, VIN = 5V, IC =10A, Tj= 25C		1.7	2.2	V
Collector to emitter saturation voltage	VCE(sat)	VD = VDB = 15V, VIN = 5V, IC =10A, Tj= 125C		1.95		V
FWD forward voltage	VF	VIN = 0VIC =-10A, Tj = 25C		1.65	2.2	V
Turn-on time	tON	VCC = 300V, VD = VDB = 15V, IC =10A, VIN = 0V-5V, inductive load		700		ns
Turn-on delay time	tC(ON)			125		ns
Turn-off time	tOFF			740		ns
Turn-off delay time	tC(OFF)			60		ns
Reverse recovery time	trr			120		ns
Turn-on loss	Eon	IC = 10A, VCC = 400V, VDB = VD=15V, RG = 47, L=1mH, LS= 150nH, Tj= 25C		67	103	uJ
Turn-off loss	Eoff			146	172	uJ
Collector to emitter leakage current	ICES	VCE= VCES, Tj= 25C			75	uA
Collector to emitter leakage current	ICES	VCE= VCES, Tj= 125C			1	mA
VD Quiescent Current	ID	VD = 15V, VIN = 5V, VP1-VNC		0.32		mA
VDB Quiescent Current	IDB	VDB = 15V, VIN = 5V, UFB - U, VFB - V, WFB - W		270	550	uA
Fault output voltage	VFOH	Vsc = 0V, FO pin pulled up to 5V via 10K resistor	4.6			V
Fault output voltage	VFOL	Vsc =1V, IFO=1.5mA			0.3	V
Short circuit forward trigger threshold	Vsc,TH+	VD = 15V	0.37	0.47	0.65	V
Short circuit negative trigger threshold	Vsc,TH-	VD= 15V	0.2	0.4		V
Power undervoltage protection trigger level	UVDD		9.5	10.4	11.0	V
Power undervoltage protection reset level	UVDR		11.0	12.1	12.8	V
Power undervoltage protection trigger level (VDB)	UVDBD		9.5	10.4	11.0	V
Power undervoltage protection reset level (VDB)	UVDBR		11.0	12.1	12.8	V
Fault low effective impedance	Ron,FLT	I=1.5mA		50	90	ohm
Fault output pulse width	TFO			40	80	120	uS
Input signal filtering time (UP/VP/WP, UN/VN/WN)	tFIL,IN	VIN = 0 V & 5 V		140	290	nS
CIN input signal filtering time	tCINMIN	VIN = 0 V or 5 V, VCIN = 5 V		270	530	780	nS
Turn on threshold voltage	VIN(ON)	Applied between UP, VP, WP, UN, VN, WN and VNC	1.6	2.1	2.4	V
Turn-off threshold voltage	VIN(OFF)		0.8	0.9	1.2	V
Temperature output	VOT	Tc=90		1.53	1.59	1.65	V
Temperature output	VOT	Tc=25		4.15	4.17	4.19	V
BSD forward voltage	VF BSD	IF=10mA		3.2	5	V
BSD current limiting resistor	RBSD	VF1=4V, VF2=5V	18	31	42	ohm
Recommended Operating Conditions
Power supply voltage	Vcc	Applied between P NU, NV, NW	0		400	V
Control supply voltage	VD	Applied between VP1 VNC		15		V
Upper arm control power supply voltage	VDS	Applied between VUFB U, VVFB V, VWFB-W		15		V
Dead time	tdead	Corresponding to the input of each bridge arm, Tc<=100	1			us
PWM frequency	fPWM	-20Tc +100, -20Tj+150			20	kHz
Minimum input signal pulse width (ON)			0.7			us
Minimum input signal pulse width (OFF)			0.7			us
Junction temperature	Tj		-20		125
Internal NTC-thermal resistance characteristics
Thermistor	RNTC	TNTC = 25C	97	100	103	Kohm
Thermistor	RNTC	TNTC = 125C	3.25	3.46	3.69	Kohm
Temperature range			-40		125	C
Mechanical properties
Installation torque		Screw size: M3		0.69

2410121217_Jilin-Sino-Microelectronics-SPE10S60F-A_C6917306.pdf

Intelligent Power Module Jilin Sino-Microelectronics SPE10S60F-A with Integrated Protection Features

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hefei Purple Horn E-Commerce Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Power Driver Modules
Description:	DIP-25 Power Driver Modules RoHS
Mfr. Part #:	SPE10S60F-A
Model Number:	SPE10S60F-A
Package:	DIP-25