| Output Interface | Analog | Digital (PWM or SENT) | | | |
| Resolution | 14-bit (sensor array), 12-bit (output) | 14-bit (sensor array), 12-bit (output) | | bit | |
| Supply Voltage (VDD) | 4.5 - 5.5 | 5.0 | V | |
| On-chip LDO Output (VDD3V3) | 3.3 - 3.6 | 3.45 | V | Regulated voltage, should not be loaded by external DC current |
| Supply Current (IDD_A) | 4 - 12 | | AGC=255 (no magnet), no output load, no short circuit | | mA | |
| Supply Current (IDD_B) | | 4 - 10 | AGC=255 (no magnet), no output load, no short circuit | | mA | |
| Start-up Current (ISTART) | 2.5 - 10 | VREG = 2.25V | | mA | |
| Start-up Time (TSUP) | | Functional mode | 10 | ms | |
| Integral Non-linearity (INLopt) | | Best aligned magnet, 25C, full turn | -0.5 | 0.5 | | deg | |
| Integral Non-linearity (INLtemp) | | Best aligned magnet, -40C to 150C, full turn | -0.9 | 0.9 | | deg | |
| Integral Non-linearity (INL) | | Best aligned magnet, -40C to 150C, full turn and displacement | -1.4 | 1.4 | | deg | |
| Output Noise (ON) | | Static conditions, filter on | 1 | LSB | Peak to peak |
| Sampling Time (ST) | | 125 | s | |
| Orthogonal Magnetic Field Strength (Bz) | 30 - 70 | Required component, package surface, 1.25mm circle, MFER=0 | | mT | |
| Orthogonal Magnetic Field Strength (BzE) | 10 - 90 | Required component, package surface, 1.25mm circle, MFER=1 | | mT | |
| Displacement Radius (Disp) | 0.5 | Offset between device center and magnet axis | | mm | Dependent on magnet |
| Operating Temperature Range | | -40 to 150 | C | Ambient temperature |
| Storage Temperature Range | | -55 to 150 | C | |