| Temperature Sensor Accuracy | TACY | -1.0 | 0.25 | +1.0 | C | -40C < TA +125C, VDD = 3.3V (Note 1) |
| Accuracy Drift | TDRIFT | | +0.05 | | C | VDD = 3.3V (Note 2) |
| Accuracy Repeatability | TREPEAT | | 0.0625 | | C | 48 hours at 55C, VDD = 3.3V |
| Temperature Conversion Time (0.5C/bit) | tCONV | | 30 | | ms | 33s/sec (typical) |
| Temperature Conversion Time (0.25C/bit) | tCONV | | 65 | | ms | 15s/sec (typical) |
| Temperature Conversion Time (0.125C/bit) | tCONV | | 130 | | ms | 7s/sec (typical) |
| Temperature Conversion Time (0.0625C/bit) | tCONV | | 250 | | ms | 4s/sec (typical) |
| Operating Voltage Range | VDD | 2.7 | | 5.5 | V | |
| Operating Current | IDD | | 200 | 400 | A | |
| Shutdown Current | ISHDN | | 0.1 | 2 | A | |
| Power-on Reset (POR) Threshold | VPOR | | 2.2 | | V | Threshold for falling VDD |
| Power Supply Rejection | C/VDD | | -0.1 | | C/V | VDD = 2.7V to 5.5V, TA = +25C |
| Alert Output High-Level Current (leakage) | IOH | | | 1 | A | VOH = VDD (Active-Low, Pull-up Resistor) |
| Alert Output Low-Level Voltage | VOL | | | 0.4 | V | IOL= 3 mA (Active-Low, Pull-up Resistor) |
| Thermal Response (8L-DFN) | tRES | | 0.7 | | s | Time to 63% (+89C) from +25C (air) to +125C (oil bath) |
| Thermal Response (8L-MSOP) | tRES | | 1.4 | | s | Time to 63% (+89C) from +25C (air) to +125C (oil bath) |
| Serial Input/Output High-Level Voltage | VIH | 0.7 VDD | | | V | |
| Serial Input/Output Low-Level Voltage | VIL | | | 0.3 VDD | V | |
| Serial Input Current | IIN | | | 5 | A | |
| SDA Output Low-Level Voltage | VOL | | | 0.4 | V | IOL= 3 mA |
| SDA Output High-Level Current (leakage) | IOH | | | 1 | A | VOH = 5.5V |
| SDA Output Low-Level Current | IOL | 6 | | | mA | VOL = 0.6V |
| Serial Input/Output Hysteresis | VHYST | | 0.05 VDD | | V | |
| Spike Suppression | tSP | | | 50 | ns | |
| Serial Port Frequency | fSCL | 0 | 100 | 400 | kHz | (Note 2, Note 4) |
| Low Clock Time | tLOW | 4700 | | 1300 | ns | (Note 2) |
| High Clock Time | tHIGH | 4000 | | 600 | ns | (Note 2) |
| Rise Time | tR | | 1000 | 20 | 300 | ns | |
| Fall Time | tF | 20 | 300 | 20 | 300 | ns | |
| Data in Setup Time | tSU-DI | 250 | | 100 | ns | (Note 3) |
| Data in Hold Time | tHD-DI | 0 | | 0 | ns | (Note 5) |
| Data out Hold Time | tHD-DO | 300 | | 200 | 900 | ns | (Note 4) |
| Start Condition Setup Time | tSU-START | 4700 | | 600 | ns | |
| Start Condition Hold Time | tHD-START | 4000 | | 600 | ns | |
| Stop Condition Setup Time | tSU-STOP | 4000 | | 600 | ns | |
| Bus Free Time | tB-FREE | 4700 | | 1300 | ns | |
| Bus Time-out | tOUT | 25 | 50 | 25 | 50 | ms | |
| Bus Capacitive Load | Cb | | | 400 | pf | |
| Specified Temperature Range | TA | -40 | | +125 | C | (Note 1) |
| Operating Temperature Range | TA | -40 | | +125 | C | |
| Storage Temperature Range | TA | -65 | | +150 | C | |
| Thermal Resistance (8L-DFN) | JA | | 41 | | C/W | |
| Thermal Resistance (8L-MSOP) | JA | | 206 | | C/W | |