| Absolute Maximum Ratings |
| Storage & Operating Temperature Range | -40 | | 100 | C | |
| Lead Soldering Temperature | | | 260 | C | (1/16 inch (1.6 mm) from the case for 5 sec. with soldering
iron)(1) |
| Input Diode Forward DC Current | | | 50 | mA | |
| Input Diode Peak Forward Current | | | 3 | A | (1 s pulse width, 300 pps) |
| Input Diode Reverse DC Voltage | | | 3 | V | |
| Input Diode Power Dissipation(2) | | | 100 | mW | |
| Output Photologic Supply Voltage, VCC | | | 18 | V | |
| Duration of Output Short to VCC | | | 1 | second | |
| Voltage at Output(5) | | | 30 | V | Open Collector devices |
| Low Level Output Current (sinking) | | | 16 | mA | |
| Output Photologic Power Dissipation(3) | | | 240 | mW | |
| Electrical Characteristics |
| Input Diode Forward Voltage | | | 1.6 | V | IF = 10 mA |
| Input Diode Reverse Current | | | 100 | A | VR = 3 V |
| Output Photologic Sensor VCC Operating DC Supply Voltage | 4.5 | | 16 | V | |
| Threshold Current OPB615-618 | 0.1 | 0.55 | | mA | VCC = 5 V |
| Threshold Current OPB625-628 | 0.1 | 0.6 | | mA | VCC = 5 V |
| Threshold Current OPB665-667 | 0.1 | 1.6 | | mA | VCC = 5 V |
| Hysteresis | 1.05 | 1.20 | 1.90 | - | VCC = 5 V |
| High Level Supply Current: Buffer, 10k Pull-up (OPB615, 625, 665) | | 5 | 12 | mA | NO LOAD on Output(3) |
| High Level Supply Current: Buffer, Open-Collector (OPB616, 626,
666) | | 5 | 12 | mA | NO LOAD on Output |
| High Level Supply Current: Inverted, 10k Pull-up (OPB627, 667) | | 4 | 12 | mA | NO LOAD on Output |
| High Level Supply Current: Inverted, Open-Collector (OPB618, 628) | | 4 | 12 | mA | NO LOAD on Output |
| Low Level Supply Current: Buffer, 10k Pull-up (OPB615, 625, 665) | | 5.5 | 12 | mA | NO LOAD on Output |
| Low Level Supply Current: Buffer, Open-Collector (OPB616, 626, 666) | | 4.0 | 12 | mA | NO LOAD on Output |
| Low Level Supply Current: Inverted, 10k Pull-up (OPB627, 667) | | 6.5 | 12 | mA | NO LOAD on Output(3) |
| Low Level Supply Current: Inverted, Open-Collector (OPB618, 628) | | 5.0 | 12 | mA | NO LOAD on Output(3) |
| High Level Output Voltage: Buffer, 10k Pull-up (OPB615, 625, 665) | VCC- 1.5 | | | V | IOH = 100 A(3) |
| High Level Output Voltage: Buffer, Open-Collector (OPB616, 626,
666) | | | 30 | V | IOH = 100 A(3) |
| High Level Output Voltage: Inverter, 10k Pull-up (OPB627, 667) | VCC- 1.5 | | | V | IOH = 100 A(1) |
| High Level Output Voltage: Inverter, Open-Collector (OPB618, 628) | | | 30 | V | IOH = 100 A(1) |
| Low Level Output Voltage: Buffer, 10k Pull-up (OPB615, 625, 665) | | | 0.4 | V | IOL = 16 mA, VCC = 4.5 V(3)(1) |
| Low Level Output Voltage: Buffer, Open-Collector (OPB616, 626, 666) | | | 0.4 | V | IOL = 16 mA, VCC = 4.5 V(3)(1) |
| Low Level Output Voltage: Inverter, 10k Pull-up (OPB627, 667) | | | 0.4 | V | IOL = 16 mA, VCC = 4.5 V(3)(1) |
| Low Level Output Voltage: Inverter, Open-Collector (OPB618, 628) | | | 0.4 | V | IOL = 16 mA, VCC = 4.5 V(3)(1) |
| Output Rise Time, Output Fall Time | | 30 | | ns | f = 10 kHz, RL = 300 , DC = 50%(3) |
| Propagation Delay, Low-High: Buffer (OPB615, 625, 665 / OPB616,
626, 666) | | 0.6 | | s | |
| Propagation Delay, Low-High: Inverter (OPB627, 667 / OPB618, 628) | | 3.0 | | s | |
| Propagation Delay, High-Low: Buffer (OPB615, 625, 665 / OPB616,
626, 666) | | 3.0 | | s | |
| Propagation Delay, High-Low: Inverter (OPB627, 667 / OPB618, 628) | | 0.6 | | s | |
| Data Rate | | | 100 | kHz | RL = 300 , DC = 50%(4) |