Wire Wound Chip Common Mode Choke cjiang FXCM7060F-101T for Electromagnetic Interference Management

Product Overview

The FXCMXXXXF-Series and FXCMXXXXCF-Series Wire Wound Chip Common Mode Chokes are designed for general electronics equipment. These components serve as common mode line filters, effectively suppressing electromagnetic interference. They are developed and manufactured by SZ CJIANG TECHNOLOGY CO., LTD, a company based in Shenzhen, China.

Product Attributes

• Brand: CJIANG
• Manufacturer: SZ CJIANG TECHNOLOGY CO., LTD
• Origin: Shenzhen, China
• Product Type: Wire Wound Chip Common Mode Choke
• Series: FXCMXXXXF-Series, FXCMXXXXCF-Series
• Material (Core): Ferrite
• Material (Case): LCP
• Material (Wire): P180 Grd1*2*16.5
• Material (Adhesive): Epoxy Resin 107H
• Material (Tin): SHENMAO
• Material (Ink): BON MARQUE

Technical Specifications

General Electrical Characteristics:

• Rated Current: Temperature rise 40C TYP
• Operating Temperature: -40C to +125C

Product Identification Example: FXCM4520F-900T

• (1) Series: FXCM
• (2) Dimensions (L*H*W)
• (3) Type
• (4) Impedance (e.g., 900=90, 901=900, 902=9000)
• (5) Packing: REEL

Dimensions:

FXCM4520F Series Electrical Characteristics:

FXCM7060F Series Electrical Characteristics:

FXCM9070F Series Electrical Characteristics:

FXCM1211F Series Electrical Characteristics:

FXCM1513CF Series Electrical Characteristics:

Reliability Testing:

• Operating Temperature: -40C to +125C (Contain Heating coil)
• Appearance Inspection: No external defects by visual inspection.
• Terminal Strength: After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N (1.02kg) for 102 sec. Terminal should not peel off.
• Heat endurance of reflow soldering: Inductance deviation within 10% after 96 hours in 90~95% relative humidity at 402C and 1 hour drying under normal condition.
• Insulating resistance: Over 100 M at 100V D.C. between wire and core.
• Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core.
• Temperature characteristics: Inductance coefficient (0~2,000) 10/ (-40~ +125).
• Humidity characteristics: A test is made under the above-mentioned condition, and it is kept for 2 hours in the normal condition. After that, no mechanical and electrical defect should be found.

Packing Specifications:

• Tape width: 24 mm
• Distance: 16 mm
• Pull-of force: 10~120g
• Reel Diameter: 13' (330mm) for most series, 178mm for FXCM4520F series.
• Packaging: PE bag, Inner box, Outer carton.

Disclaimer: All products listed in this specification are developed, designed, and intended for use in general electronics equipment. They are not designed or warranted to meet the requirements of applications requiring especially high reliability, or where failure, malfunction, or trouble might directly cause damage to society, person, or property. CJIANG is not responsible for any damage or liability caused by use in such applications. Contact CJIANG for more details if intending to use products in aircraft, aerospace, undersea, nuclear control, , power plant, medical, transportation (automobiles, trains, ships, etc.), traffic signal, disaster prevention/crime prevention, data-processing equipment, or applications of similar complexity or with comparable reliability requirements.