| Sign In | Join Free | My infospaceinc.com |
|
| Categories | RF Drone Detection Module |
|---|---|
| Model Number: | DB01 |
| Frequency band range:: | 70M-6G |
| MOQ: | 1 |
| Delivery Time: | 5-8 Days |
| Power Supply:: | 5V |
| Price: | 3200 |
| Power Consumption:: | 3W |
| Certification: | CE |
| Detection Range:: | 1m-10km |
| Supply Ability: | 5000 |
| Brand Name: | Roviyno |
| Product Name:: | RF Detection Module |
| Packaging Details: | Carton |
| Payment Terms: | T/T |
| Dimensions:: | 89mm * 55mm * 18mm |
| Place of Origin: | China |
| Dual-Antenna:: | (RX1 high frequency band, RX2 low frequency band |
| Company Info. |
| Roviyno Intelligent Technology Co., Limited |
| Verified Supplier |
| View Contact Details |
| Product List |
Direction‑finding function can be realized after connecting external antenna switch through GPIO interface. Processed detection data can be quickly accessed by your upper‑level application.

- Multiple frequency scanning modes
- Single or multi-frequency locking
- Real-time spectrum output (FFT)
- Dual RX channel support (config_2r2t)
- GPIO antenna switching & control
- FPV image decoding & TCP transmission (PAL/NTSC)
| Signal Type | Drone Model |
|---|---|
| DJI_ID | DJI drone ID |
| Lightbridge type1 | DJI P4, Spark |
| Lightbridge type2 | Autel Evo2V2, Feimi |
| eWifi_5M | DJI Mini1,Air1 |
| eWifi_10M | HUBSAN Zino, HUBSAN Eagle, |
| PALAnalog | Analog PAL |
| NTSC Analog | Analog NTSC |
| DJI_0C123 10M | Mini 2,3, 4k, Air 2, 3, Mavic 2,3, Avata, P4-2.0 |
| DJI_0C123 20M | Mini 2,3, 4k,Air 2, 3, Mavic 2,3, Avata, P4-2.0 |
| DJI_03+ | Mavic 3 series |
| DJI_04_type | Mini4, Air3s, Avata2, Neo |
| Autel_typel | Autel nano, nano+, lite, lite+, Evo2_V3, MAX4T, |
| Datalink | P900/P840/Mavlink |
| O3+ | DJl and Autel remote control and some datalink |
| LTE_type0 | LTE modfied |
| LORA | RadioMaster, Lora Signal, ExpressLRS, T900 |
| Walksnail | Walksnail, Avatar |
| DJI_04+ | Mavic 4 pro |
| Command | Explanation |
|---|---|
| start or start-freq0 | Include frequency band 2384 - 2485 5150-5260 5725-5940 |
| start -freq 1 | 430-440 825-845 902-928 1200-1445 2384 - 2485 5150-5260 5725-5940 |
| start-freq2 | Only 8 DJI ID frequency |
| start-freq3 | 430-440 825-845 900-930 1000-1700 2000-2500 3300-3500 4900-6000 |
| start -freq 4 | 400-1700 2000-2500 3000-3500 4900-6000 |
| start -freq 8 | 825-850 902-928 1400-1450 2384-2485 5150-5260 5725-5940 |
| start -freq xxxx | Lock frequency start-freq 2450 |
| -gpiox | gpiovalue fixed to x |
| Custom band: start -band 430,440,-band 830,845, -band 902,928, -band 1430,1445, -band 2384,2485, - band 5150,5260,-band 5725,5940, | |
| reboot | Reboot device |
| start-heart_beat 0 | Close heartbeat |
| start-gain xx | Gain range [10 70] |
| -set_ant xxxx | Antenna enable bit mask |
| -rx2 x | X=1 use RX2 for lower frequency range Mustconfig_2r2tbeforehead |
| -rx2_freq xxxx | Frequency large than xxxxMhz, use RX1 Frequency less than xxxxMhz, use RX2 |
| config_2r2t | Turn on RX2 Use RX2 will increase 0.5W compared to use RX1 only |
| config_1rlt | Close RX1, |
| #NAME? | Change ip, for example -setip192.168.2.2 |
| -fpv_only 1 | Scan FPV only, |
| #NAME? | Close Scan FPVonly, |
| -freqs f1,f2,f3,...fn, | Lock multiple frequenciese |
| -turn_on_gpio x | Gpiox pull up |
| -turn_off_gpio x | Gpio x pull down |
| -fft1 | Output real-time spectrum 4 byte frequency, 2048 FFT value. |
| -fft0 | Close real-time spectrum output |


|