High Quality Design
1.Wide Voltage Design in line with International Standards
Meet single-phase 200V~240V,three-phase 200V~240V and 380~480V
power grid requirements including Europe, North America, India,
etc.
2.Various EMC Specifications and Solutions
Meet EU C3 ,C2 and other requirements andcan provided comprehensive
solutions foroccasions with high EMC requirements.
3.Complete DC Braking Circuit Solution
0.75-22kW: built-in brakingunit;>30kW: optional built-in braking
unitMore comprehensive and inteligent braking protection: with
braking resistorshort circuit protection,braking circuiovercurrent
protection, braking pipe overload protection, braking pipe direct
detection and other functions.
4.Long Life Design
The core components use higher quality components, and the single
boardadopts the triple-proof paint automatic spraying process to
increase the environmental tolerance and improve the protection
capability of thesingle board.
5.Independent Air Duct Design
Effectively prevent external pollution from entering theinverter
and causing short circuit and other faults, thusimproving
reliability.
6.InternationallEc Standard Design
The products comply with international lEC standards andmeet RoHS
standards forenvironmental protection needs
High Performance
1.Good Voltage and Current Control
During the deceleration process, the output frequency is to
adjusted to avoid excessive motor power generationdue to excessive
deceleration, which may causeovervoltage on the DC bus of the
inverter
During the acceleration process, the outputfrequencyis adiusted to
avoid excessive loadcaused by excessive acceleration, which
maycause overcurrentin the inverter.
2.Excellent Parameter Self-learning Function
It can accurately perform self-learning of rotating or static motor
parameters, is easy to debug, simple tooperate,and providing higher
controlaccuracyand response speed.
Asynchronous Motor:1.Static parameter self-learning 2.Comprehensive
parameter self-learning
Synchronous Motor :1.Load parameter self-learning 2.No-load
parameter self-learning
3.Multi-point Voltage and Flux Setting Function
Three curve setting modes: linear, multi-point curve, square
curve.The three points of the curve can be adiusted.
