| Product Type | USB Series "B" Right Angle Receptacle, USB Series "B" Plug |
| Receptacle Terminal Material | Phosphor Bronze Strip |
| Receptacle Insulator Housing Material | Plastic rated UL94-V0 or better |
| Receptacle Shell Material | Phosphor Bronze Strip |
| Receptacle Terminal Plating (Contact Area) | 0.76um (30u"INCHES) Palladium Nickel with Gold Flash Minimum over
1.27um (50u"INCHES) Minimum Nickel |
| Receptacle Terminal Plating (Solder Tail) | 2.54um (100u"INCHES) 90/10 Tin-Lead Minimum over 1.27um
(50u"INCHES) Minimum Nickel |
| Receptacle & Plug Kit Shell Plating | 2.54um (100u"INCHES) 90/10 Tin-Lead Minimum over 1.27um
(50u"INCHES) Minimum Nickel underplate |
| Receptacle Design | Multiple piece assembly, double rows of contacts (2.5mm spacing in
interface area), 90-degree bend for PC board termination
(through-hole leg), resilient contact arms for ESD grounding and
plug retention. Retention claws on outside shell for PCB
attachment. Recommended PCB thickness: 1.57mm (0.62"INCHED). |
| Mating/Unmating Force | Mating: <35N (7.87Lb) per plug; Unmating: >10.0N (2.25Lb) per
plug |
| Contact Retention (Axial Load) | > 0.5 Pounds without dislodging |
| Operating Temperature Range | -55C to 85C |
| Low Level Contact Resistance (LLCR) | 30m MAX. (EIA 364-23) |
| Insulation Resistance | >1000 Megohms (EIA 364-21, 500V DC, 2 min electrification) |
| Dielectric Withstanding Voltage | 750V AC, 60 Hz (EIA 364-20, Method A) |
| Current Rating | 1 contact at 1.50A, all contacts in series at 1.00A (30C MAX. T ANY
POINT) (BUS-03-601) |
| Capacitance | 2pF MAX. (EIA 364-30, 1 KHz) |
| Durability Cycles | 1500 Cycles |
| Solderability | Meets ANSI-J-002 Requirements (Test Condition A, 4 hours steam
aging) |
| Resistance to Solder Heat | No evidence of physical or mechanical damage (EIA 364-56) |
| Resistance to Solvents | No evidence of physical or mechanical damage (EIA 364-11, Class IV,
3 min immersion at 25C) |
| Vibration (Random) Acceptance Criteria | No discontinuities greater than 1 microsecond (EIA 364-28, Test
Condition V, Test Letter A) |
| Mechanical Shock Acceptance Criteria | No discontinuities greater than 1 microsecond (EIA 364-27,
Condition H) |
