| Visual Examination | All components shall be properly assembled and free of burrs,
warps, scratches, broken chips, and other abnormalities. | EIA 364-18B |
| Low Level Contact Resistance | Initial: 20m Max., Final: 70m Max. | N/A |
| Insulation Resistance | Initial: 500 M Min., Final: 100 M Min. | EIA-364-21D (100V DC for 1 min) |
| Dielectric Withstanding Voltage | No evidence of breakdown or flash burn. Current leakage: 0.50 mA
Max. | EIA-364-20D, Method B (300V AC for 1 min) |
| VSWR | (See Core Specifications) | Network analyzer (Frequency: 100M~6GHz) |
| Un-mating Force | Initial: 5N Min., After 30 cycles: 3N Min. | Push-on/pull-off machine (253mm/min) |
| Crimp Strength | 5N Min. | Tensile strength machine (253mm/min) |
| Durability (Contact Resistance) | Inner Contact: Initial 20m Max., After test 40m Max. Ground
Contact: Initial 20m Max., After test 40m Max. | EIA 364-09C (30 cycles) |
| Cable Retention Force | Inner Contact: Initial 20m Max., After test 40m Max. Ground
Contact: Initial 20m Max., After test 40m Max. Electrical
discontinuity: No electrical discontinuity > 1 micro-sec. | Tensile test (253mm/min) |
| Vibration | Appearance: No abnormality. Electrical discontinuity: No electrical
discontinuity > 1 micro-sec. Contact Resistance: Inner/Ground:
Initial 20m Max., After test 40m Max. | EIA 364-28E (10Hz-100Hz-10Hz, 1.5mm or 59m/s, 3 directions) |
| Physical Shock | Appearance: No abnormality. Electrical discontinuity: No electrical
discontinuity > 1 micro-sec. Contact Resistance: Inner/Ground:
Initial 20m Max., After test 40m Max. | EIA 364-27B (735m/s, 11msec, half sinusoidal, 6 directions) |
| Humidity Resistance | Appearance: No abnormality. Contact Resistance: Inner/Ground:
Initial 20m Max., After test 40m Max. Insulation Resistance:
Initial 500M Min., After test 100M Min. DWV: No breakdown. | EIA 364-31C, Method II, Condition A (402, 90~95% RH for 96 hours) |
| Thermal Shock | Appearance: No abnormality. Contact Resistance: Inner/Ground:
Initial 20m Max., After test 40m Max. Insulation Resistance:
Initial 500M Min., After test 100M Min. DWV: No breakdown. | EIA 364-32E (-55 for 30 min 85 for 30 min, 5 cycles) |
| Temperature Life | Appearance: No abnormality. Contact Resistance: Inner/Ground:
Initial 20m Max., After test 40m Max. Insulation Resistance:
Initial 500M Min., After test 100M Min. DWV: No breakdown. | EIA 364-17B (902 for 96 hours) |
| H2S Gas Test | Appearance: No abnormality, good performance. Contact Resistance:
Inner/Ground: Initial 20m Max., After test 40m Max. | N/A (402, 805% RH, H2S 31ppm for 96 hours) |
| Salt Spray Test | Appearance: No abnormality, good performance. Contact Resistance:
Inner/Ground: Initial 20m Max., After test 40m Max. | EIA 364-26B, Method 101, Condition B (352, 5% salt water for 48
hours) |
| Solder Ability | N/A | Reflow profile (2 times) |
