| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 mMAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal
or ground. | 500MMIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1
minute between adjacent terminal or ground. | No Breakdown |
| Locking Force | Insert and extract applicable FFC at the speed rate of
253mm/minute. | 1.96*n (N) MAX |
| Withdrawal Force | Insert and extract applicable FFC at the speed rate of
253mm/minute. | 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN |
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate
of less than 10 cycles/minute. | Contact Resistance 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours
in each X,Y,Z axes. DC 1mA energized. | Discontinuity 1 ms MAX. No Damage. |
| Shock | 490m/s{50G}, 3 strokes in each X,Y,Z axes. DC 1mA energized. | Discontinuity 1 ms MAX. No Damage. |
| Heat Resistance | 852, 96 hours. Mate applicable FPC/FFC. | Contact Resistance 60 m MAX. No Damage. |
| Cold Resistance | -402, 96 hours. Mate applicable FPC/FFC. | Contact Resistance 60 m MAX. No Damage. |
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours.
Mate applicable FPC/FFC. | Insulation Resistance 20 M MIN. No Damage. |
| Temperature Cycling | 5 cycles of: -452 (30 min), 852 (30 min). Mate applicable FPC/FFC. | Contact Resistance 60 m MAX. No Damage. |
| Salt Spray | 484 hours exposure to a salt spray from the 51% solution at 352.
Mate applicable FPC/FFC. | Contact Resistance 60 m MAX. No Damage, Corrosion. |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. Mate applicable
FPC/FFC. | Contact Resistance 60 m MAX. No Damage. |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia
solution. Mate applicable FPC/FFC. | Contact Resistance 60 m MAX. No Damage. |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2355. 0.2 mm from
terminal tip. | Solder Wetting 95%. |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605. 0.2 mm from
terminal tip. | No Damage, Deformation. |
