| SCOPE | Production and Inspection of Connector | This specification covers production and inspection of the
Connector. |
| USE CONDITION | Ambient Temperature Range | -25+85 |
| USE CONDITION | Applicable PC Board Thickness | 1.2mm~1.6mm |
| Appearance | Product surface without defect, dirt, crack, and mechanical damage.
Contact without rust, plating not oxidized and not peeled. | |
| Dimension | According to drawings | |
| Exchangable | Exchangable with same specification products. | |
| Material - Terminal (Contact) | Phosphor bronze | Thickness: 0.15mm (Tin Plating: 3~4m) or 0.30mm (Tin Plating: 3~4m
or Gold Plating: 3~4m) |
| Material - Housing (Plastic) | Nylon66 UL94V-0, Nylon46 UL94V-0, PBT UL94V-0 | Color: White, Beige |
| Material - Solder tabs | Phosphor bronze | Thickness: 0.25mm (Tin Plating: 3~4m) |
| Electrical Performance - Rated Voltage | 250V AC/DC | |
| Electrical Performance - Rated Current | 2A AC/DC | |
| Electrical Performance - Contact Resistance | 20 m | |
| Electrical Performance - Insulation Resistance | 1000M | |
| Electrical Performance - Dielectric Strength | 500V AC/minute | |
| Mechanical Performance - PIN Retention Force | 10N per pin | |
| Mechanical Performance - Terminal Retention Force | 10N per pin | |
| Mechanical Performance - Plug-in Force | 3N per pin | |
| Mechanical Performance - Plug-out Force | 0.5N per pin | |
| Endurance Characteristics - Soldering Rest | Time: 2.50.5S, Temperature: 2605, Area of Soldering: 95% | |
| Endurance Characteristics - Resistance to Soldering Heat | Time: 51S, Temperature: 2605, Appearance: No Damage | |
| Endurance Characteristics - Heat Test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact
Resistance: 20 m | |
| Endurance Characteristics - Cold Test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact
Resistance: 20 m | |
| Endurance Characteristics - Temperature Cycling | Low temp: -253, High temp: +853, 5 cycles. Test after 30 min in
normal condition. Appearance: No Damage, Contact Resistance: 20 m | |
| Endurance Characteristics - Constant Humidity Heat | Temperature: 602, Relative Humidity: 90%-96% RH, Time: 96h,
Appearance: No Damage, Contact Resistance: 20 m, Insulation
Resistance: 100 M | |
| Endurance Characteristics - Salt Spray | Salt concentration: 51%, Temperature: 352, Time: 162h. After salt
removal and recovery, Appearance: No Damage, Contact Resistance: 20
m | |
