| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | AFE03-S**FMA-1H | |
| Scope | 0.3mm Pitch FPC/FFC Connectors (Locking Series) | |
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz virtual value) | |
| Ambient Temperature Range | -45 to +85 | |
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC, dry circuit, 20mV MAX, 10mA |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC, apply 500V DC between adjacent terminals
or ground |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC, apply 200V AC (virtual value) for 1 minute
between adjacent terminals or ground |
| Locking Force | 1.96*n N MAX | Insert and extract applicable 0.3mm thick FFC at 253mm/minute speed |
| Withdrawal Force | 0.49*n N MIN | Insert and extract applicable 0.3mm thick FFC at 253mm/minute speed |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at 253mm/minute speed |
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | 20 cycles at less than 10 cycles/minute, no power |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498) |
| Vibration | Contact Resistance 60 m MAX, Appearance: No Damage, Discontinuity 1
ms MAX | DC 1mA, Amplitude: 1.5mm P-P, Frequency: 10-55-10Hz/min, Duration:
2 hours in each X, Y, Z axes |
| Shock | Contact Resistance 60 m MAX, Appearance: No Damage, Discontinuity 1
ms MAX | DC 1mA, 490m/s {50G}, 3 strokes in each X, Y, Z axes |
| Heat Resistance | Contact Resistance 60 m MAX, Appearance: No Damage | 852, 96 hours, then return to room temperature for 1-2 hours |
| Cold Resistance | Contact Resistance 60 m MAX, Appearance: No Damage | -402, 96 hours, then return to room temperature for 1-2 hours |
| Humidity | Contact Resistance 60 m MAX, Insulation Resistance 20 M MIN,
Appearance: No Damage | 402, 90-95% RH, 96 hours, then measure within 0.5 hours at room
temperature |
| Temperature Cycling | Contact Resistance 60 m MAX, Appearance: No Damage, corrosion | 5 cycles of: -452 (30 min), 852 (30 min), with 10-15 min at room
temp between cycles |
| Salt Spray | Contact Resistance 60 m MAX, Appearance: No Damage | 484 hours exposure to 51% salt spray at 352, followed by washing
and drying |
| SO2 Gas Resistance | Contact Resistance 60 m MAX, Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402 |
| NH3 Gas Resistance | Contact Resistance 60 m MAX, Appearance: No Damage | 40 minutes exposure to NH3 gas from 28% Ammonia solution |
| Solderability | Solder Wetting 95% | Immersion in 2355 tin bath for 20.5 sec, 0.2mm from terminal tip |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Immersion in 2605 tin bath for 50.5 sec, 0.2mm from terminal tip |
