| Datum A-B | 0.27 | 0.1 | (INS) |
| Datum A-B | 0.5 | 0.2 | (CONTACT A) |
| Datum A-B | 0.45 | | (BRACKET) |
| Datum A-B | 1.1 | 0.2 | (CONTACT B) |
| Datum A-B | 2.3 | 0.1 | (INS) |
| Datum A-B | 5.2 | 0.15 | |
| Datum A-B | 8 | | (BRACKET) |
| Datum A-B | 10.6 | 0.2 | (3) (NOTE 4) |
| Datum A-B | 3.85 | | (NOTE 4) |
| Datum A-B | 6.65 | 0.1 | |
| Datum A-B | 1.2 | | |
| Datum A-B | 3.4 | | |
| Datum A-B | 2 | | |
| Datum X-Y | 0.15 | 0.05 | |
| Datum X-Y | 0.9 | 0.05 | |
| Datum X-Y | 1.75 | 0.05 | |
| Datum X-Y | 0.8 | 0.05 | |
| Datum X-Y | 0.45 | | |
| Datum X-Y | 1.1 | | |
| Datum X-Y | 2.05 | 0.05 | |
| Datum X-Y | 5.2 | | |
| Datum X-Y | 8 | | |
| Datum X-Y | 9.4 | | |
| A12 | | | |
| B12 | | | |
| A1 | | | |
| M | | | |
| A-B | 0.15 | | |
| C | | | |
| B | | | |
| A-B | 0.12 | | |
| M | | | |
| C | | | |
| A-B | 0.12 | | |
| M | | | |
| A | | | |
| C | | | |
| 0.15 | 8.84 | | |
| 9.27 | 0.2 | | |
| 16.5 | 0.2 | | |
| 24-0.2 | 0.05 | | |
| 2-t0.25 | 0.05 | | |
| 0.15 | 5.75 | | |
| 13.3 | | | |
| 2-t0.26 | | | |
| 2.8 | | | |
| 7.35 | 0.1 | | (INS BOSS) |
| 1.1 | | | (MID PLATE) |
| 2-0.35 | 0.05 | | |
| 11.7 | | | (BRACKET) |
| 7.55 | | | (MID PLATE) |
| 9.85 | | | (BRACKET) |
| 0.25 | | | |
| 2.875 | | | |
| 2- | 1.85 | 0.07 | |
| NOTE 6 | | | |
| NOTE 4 | | | |
| LASER WELD | | (NOTE 8,9) |
| LASER WELD | | | (NOTE 8,9) |
| 10.1 | | | |
| 7.6 | 0.15 | | |
| A-B | 0.15 | | |
| M | | | |
| 0.15 | M | | |
| A-B | (0.07) | | |
| 7.55 | | | |
| 5.1 | | | |
| 2-1.3 | 0.2 | | |
| 3.04 | 0.1 | | |
| 3.6 | | | |
| 2-1 | 0.1 | | |
| 0.15 | (BRACKET) | | |
| 11.1 | 0.2 | | |
| 2.2 | | | |
| 2-0.8 | (BRACKET) | | |
| 0.2 | 2-0.8 | | |
| 0.6 | 0.1 | | |
| MATING BOTTOM FACE | SPEC PLUG MATED CONDITION (REF.) | (51) | |
| 0.65 | | | |
| 1.2 | | | |
| 6.5 max. | | | |
| MATING BOTTOM FACE | | | |
| 4.6 | | | |
| 0.35 | (4.45) | (NOTE 2) | |
| 0.3 | | | |
| 5.6 | | | |
| 0.4 | | | |
| 0.35 | | | |
| 4 | | | |
| 1 | | | |
| 6 | | | |
| 3 | | | |
| 2 | | | |
| 0.4 | (INS BOSS) | | |
| 0.15 | | | |
| 0.05 | 2-0.6 | 0.15 | |
| (MID PLATE) | 2- | 0.44 | |
| 7.35 | 0.05 | | |
| X-Y | B | | |
| (10 : 1) | 0.05 | X-Y | Z |
| 0.05 | X-Y | Z | |
| 0.05 | X-Y | | |
| 2-1.9 | 0.05 | | |
| 0.03 | 24-0.27 | 0.05 | |
| 2-0.6 | | | |
| 2- | 0.8 | 0.05 | |
| SPRING AREA | (NOTE 5) | | |
| 3.8 | | | |
| NOTE 1. COPLANARITY OF SMT TERMINAL AND BRACKET SHALL BE 0.1
MAXIMUM. | | | |
| NOTE 2. MATING DIMENSIONS CONSIST OF "Universal Serial Bus Type-C
Cable and Connector Specification 1.2" | | | |
| NOTE 3. THE SHELL LENGTH IS LESS THAN THE 6.2MM RECOMMENDED IN THE
USB STANDARD. THE SYSTEM IMPLEMENTER IS RESPONSIBLE FOR ACHIEVING
END PRODUCT RELIABILITY FOR THE MATED CONNECTOR CONDITION. REFER TO
USB TYPE-C CABLE AND CONNECTOR SPECIFICATION REVISION 1.2 SECTION
3.2.1 | | | NOTE 7. |
| NOTE 4. VACUUM AREA. | | | |
| NOTE 5. THIS DIMENSION IS SET AT MAXIMUM RATE OF THE SPRING
STICKING OUT WHEN MATING WITH PLUG. | | | |
| NOTE 6. PRODUCTION LOT NUMBER IS MARKED AS SHOWN IN TABLE-1. (LASER
MARKING) | | | |
| NOTE 7. METAL EXPOSED AREA SIZE COULD BE SLIGHTLY CHANGED BASED ON
MOLDING PROCESS CONDITION IN EACH LOT, HOWEVER THIS WOULD NOT
AFFECT CONNECTOR FUNCTION. | | | |
| NOTE 8. CONVEX OF LASER WELDING POINT SHOULD BE 0.15 OR LESS. | | | |
| NOTE 9. LASER WELD POINTS MAY BE DISCOLORED. | | | |
| NOTE 10. PIN ASSIGNMENT (FRONT VIEW) | A12 | 0.05 | (51) |
| APPLICABLE P.C.B DIMENSION (REF.) | B12 | B1 | |
| X-Y | X | 0.05 | X-Y Z |
| Z | SURFACE VIEW FROM CONNECTOR MOUNTING SIDE | 0.05 | Z |
| X-Y | Y | B | |
| 9.85 | 2-1.6 | 13.3 | 0.05 |
| 9.44 | 1.8 | 0.05 | R0.4 |
| 2- | 11.7 | 2-0.6 | 0.05 |
| 0.25 | 2.875 | 5.75 | 7.35 |
| 0.05 | 0.6 | 0.05 | 0.6 |
| 0.05 | 7.55 | | |
| VER. | DATE | CN NO. | DESCRIPTION |
| DR. | CHK. | APPD. | APPD. |
| 6 SHELL | 1 STAINLESS STEEL NICKEL PLATING NICKLE: 0.5m MIN. | | |
| 5 MID PLATE | 1 STAINLESS STEEL NICKEL PLATING NICKLE: 0.5m MIN. | | |
| 4 BRACKET | 1 STAINLESS STEEL NICKEL PLATING NICKLE: 0.5m MIN. | | |
| 3 INSULATOR | 1 HEAT RESISRING PLASTIC COLOR:BLACK | | |
| 2 CONTACT B | 12 COPPER ALLOY CONTACT AREA: GOLD OVER NICKEL SOLDER TAILS: GOLD
FLASH OVER NICKEL CONTACT AREANICKEL:1.5m MIN. GOLD:0.1m MIN.
SOLDER TAILSNICKEL:1.5m MIN. GOLD FLASH:0.03m MIN. | | |
| 1 CONTACT A | 12 COPPER ALLOY | | |
| No. | DESCRIPTION | QTY. | MATERIAL FINISH REMARKS |
| JACS-30353 INDUSTRY,LTD. JAE Connector DIV.
Proprietary.Copyright(C) 2018, Japan Aviation Electronics Industry,
LTD. DCF-C-213H(12.08) | | | |
| 0.1 0.4 0.8 | (DRAWING NO.) | SIZE A2 S/W SJ119577 | 1 SJ119577 |
| Y.SATOU DX07 | 51 | T.MASUMOTO DX07BN24JA2 | 26/MAR/2018 |
| 100 90 80 70 60 50 40 30 20 10 | CHK. 0 (SPECIFICATION) (DIMENSION) (GENERAL TOLERANCE) (UNIT)
(ANGLES) APPD. APPD. DR. 1(ORIGINAL DATE) (SERIES) (SCALE) (TITLE)
(MASS) (VER.) JAPAN AVIATION ELECTRONICS (DRAWING NO.) | NOTE 7 | A12 |
| A1 | B12 | B1 | 5 |
| 0.15 M | A-B C | 9.74 (CENTER HEIGHT) 0.05 | (8.34)(NOTE 2) |
| 2-t0.25 | (0.64) | (2.56)(NOTE 2) | (4-R1.45) |
| YEAR MARKING | MONTH MARKING | DAY MARKING | HOUR MARKING |
| LINE CODE MARKING | 2016 6 1 1 1 1 0 0 1 1 | 2017 7 2 2 2 2 1 1 2 2 | 2018 8 3 3 3 3 2 2 3 3 |
| 2019 9 4 4 4 4 3 3 4 4 | 2020 0 5 5 5 5 4 4 5 5 | 2021 1 6 6 6 6 5 5 6 6 | 2022 2 7 7 7 7 6 6 7 7 |
| 2023 3 8 8 8 8 7 7 8 8 | 2024 4 9 9 9 9 8 8 9 9 | 2025 5 10 0 10 A 9 9 10 A | 11 X 11 B 10 A 11 B |
| 12 Y 12 C 11 B 12 C | 13 D 12 C 13 D | 14 E 13 D 14 E | 15 F 14 E 15 F |
| 16 G 15 F 16 G | 17 H 16 G 17 H | 18 J 17 H 18 J | 19 K 18 J 19 K |
| 20 L 19 K 20 L | 21 M 20 L 21 M | 22 N 21 M 22 N | 23 P 22 N 23 P |
| 24 Q 23 P 24 Q | 25 R 25 R | 26 S 26 S | 27 T 27 T |
| 28 U 28 U | 29 V 29 V | 30 W 30 W | 31 X 31 X |
| 32 Y 33 Z | [TABLE-1] FIRST DIGIT SECOND DIGIT THIRD DIGIT FOURTH DIGIT FIFTH
DIGIT | Pin No. A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 GND TX1+ TX1- VBUS
CC1 D+ D- SBU1 VBUS RX2- RX2+ GND GND | RX1+ RX1- VBUS SBU2 D- D+ CC2 VBUS TX2- TX2+ GND Pin No. B12 B11
B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 |
| 2018/03/27 JAE-CONNECTOR.COM Reference Only | | | |
