| Connector Style | D-subminiature |
| Popularity | One of the most popular styles in the I/O category |
| Applications | Computer, telecom, datacom, medical, test instrumentation,
military, aerospace |
| Types of Connectors | - Printed Circuit Board connectors (Vertical, Right-Angle with Dip
Solder PC tails)
- Connectors for cable assemblies/wire harnesses (Crimp and Poke,
Solder Cup, Insulation Displacement (IDC), Wire Wrap)
|
| Intermateability | Intermateable with any Cinch D-subminiature of comparable pin count
and density, or any other manufacturer's D-sub connector
dimensionally complying with MIL-C-24308. |
| Solder Terminations & Boardlocks | Meet solderability requirements per MIL-STD-202, Method 208. |
| Durability | 500 mating cycles (specified on catalog pages) |
| Contacts | Standard density connectors utilize size 20 contacts. Stamped and
formed contacts and/or screw machine contacts. |
| Metal Shells (Commercial) | Steel, zinc plating with yellow or clear chromate finish, or tin
plating (grounding indents on plugs). |
| Metal Shells (Military M24308 Series) | Steel, cadmium plating with yellow chromate finish. |
| Position Sizes | 9, 15, 25, 37, and 50 positions |
| Operating Temperature | -65C to +105C (General), -65C to +125C (Specific Series) |
| Withstanding Voltage | Minimum 1000V RMS @ sea level (General), Minimum 1250V RMS @ sea
level (Specific Series) |
| Current Rating | 5 Amps (General), 3 Amps (IDC Series) |
| Contact Resistance | 2.7 milliohms maximum |
| Insulation Resistance | 5000 megohms minimum (initial); 1000 megohms (minimum) after
environmental testing |
| Individual Contact Insertion/Separation Force | 0.7 oz. minimum / 12 oz. maximum |
| Shock | 50G peak per MIL-STD-202, Method 213, Condition G |
| Vibration | 12 cycles in three perpendicular directions @ 10-2000Hz, per
MIL-STD-202, Method 204, Condition D |
| Moisture Resistance | 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method
103 |
| D*U Series Crimp and Poke Dimensions (Wire AWG) | Pin/Socket Wire AWG | A (in/mm) | B (in/mm) | C (in/mm) |
| Pin #20, 22, 24 | .066 / 1.67 | .045 / 1.14 | .537 / 13.64 |
| Socket #20, 22, 24 | .066 / 1.67 | .045 / 1.14 | .523 / 13.28 |
| T* Series All-Plastic IDC Dimensions | Positions | A (in/mm) | B (in/mm) | C (in/mm) | CP (in/mm) | CS (in/mm) | D (in/mm) |
| 9 | 1.209 / 30.71 | 1.309 / 33.25 | .984 / 24.99 | .668 / 16.96 | .642 / 16.31 | .592 / 15.04 |
| 15 | 1.536 / 39.01 | 1.636 / 41.55 | 1.312 / 33.32 | .995 / 25.28 | .970 / 24.64 | .918 / 23.31 |
| 25 | 2.079 / 52.81 | 2.179 / 55.35 | 1.852 / 47.04 | 1.535 / 38.99 | 1.512 / 38.40 | 1.462 / 37.13 |
| 37 | 2.724 / 69.19 | 2.824 / 71.73 | 2.500 / 63.50 | 2.183 / 55.45 | 2.158 / 54.81 | 2.114 / 53.70 |
| Basic D Series Wire Wrap Tail Lengths | .375" (9.53 mm) or .585" (14.86 mm) | | | | | | |
| M24308 Series Crimp and Poke Contacts Wire AWG | 20, 22, and 24 AWG | | | | | | |
