| Sign In | Join Free | My infospaceinc.com |
|
| Sign In | Join Free | My infospaceinc.com |
|
| Categories | Sleeve Connector |
|---|---|
| Contact Plating: | Gold |
| Stock: | 467 |
| Current Rating: | 1A |
| Brand Name: | PJ-342 141 |
| MOQ: | 20 |
| Model Number: | PJ-342 141 |
| Packaging Details: | SMD |
| Delivery Time: | 1工作日 |
| Description: | 3.5mm Headphone Jack 1A 30V Surface Mount |
| Connector Type: | 3.5mm Headphone Jack |
| Operating Temperature: | -30℃~+70℃ |
| Voltage Rating (Max): | 30V |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
Product Name: PHONE JACK
Model No.: PJ-342 141
Rating: DC 12V 1A
Practical Temperature Range: -30C to +70C
(1) Temperature: 5C to 35C
(2) Humidity: 45% to 85%
(3) Pressure: 86 Kpa to 106 Kpa
| Item | Test Conditions | Performance |
|---|---|---|
| Connection Force | Connecting and disconnecting using standard plug gauge 3 times. | 3-30N |
| Disconnection Force | Connecting and disconnecting using standard plug gauge 3 times. | 3-30N |
| Static Load | 0.1N/m (1kgf/cm) applied to the tip of the terminal for 1 min in any direction. | No damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. |
| Contact Resistance | Measured at small current (100mA or less), 1000Hz | <50m |
| Insulation Resistance | Apply a voltage of 500V DC for 1 min to the following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | >100M |
| Dielectric Strength | AC 500V rms (50~60Hz) for 1 min | Trip current: 0.5mA. Without damage to parts: arcing or breakdown etc. |
| Item | Test Conditions | Performance |
|---|---|---|
| Solder Ability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2405C for 30.5 seconds. | (1) Solder wetting time shall be 3 seconds or less. (2) The area of soldering should be over 75%. |
| Reflow Soldering | Preheat: Temperature on the copper foil surface should reach 180C for 120s after the PCB entered into the soldering equipment. Peak Temperature: Temperature on the copper foil surface should reach the peak temperature of 2605C within 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Soldering Iron Method | Bit temperature 3305C. Application time of soldering iron 30.5 seconds. However, excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. |
| Heat Test | Store at a temperature of 702C for 96 hours, then subject to controlled recovery. | No damage on appearance, mechanical and electrical characteristics shall be satisfied. |
| Cold Test | Store at a temperature of -253C for 96 hours, then subject to controlled recovery for 1 hour. | No damage on appearance, mechanical and electrical characteristics shall be satisfied. |
| Humidity Test | Store at a temperature of 402C and a humidity of 90% to 96% for 70-20 hours. Then maintain at standard atmospheric condition for 1 hour. | No damage on appearance, mechanical and electrical characteristics shall be satisfied. |
| Life Test | Connection and disconnection shall be made 5000 cycles at a speed of 10 to 20 cycles/min. | (1) Contact Resistance: <0.1 (2) Disconnection Force: 3 to 20N (3) Mechanical and Electrical Characteristics shall be satisfied. |
| Cold & Heat Shock Test | Subjected to cycles of specified conditions and then returned to room ambient condition for 30 minutes. | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
|
